Purestock240
08-05-2014, 07:54 PM
SR PARTS
Located in Canada! I ship to the states weekly though so thats not a big deal.
Paypal or cash
PM or text if interested 705 441 2693
I'm parting out pretty much complete car lots of OEM and aftermarket stuff. I'll update it as I go along but here's a start. All parts are for s13 SR unless otherwise stated
ASK ME ABOUT ANY OEM PART NOT MENTIONED AS IM PARTING A WHOLE CAR
SR20 Eagle Rods and CP Pistons,
Rods: http://www.frsport.com/Eagle-CRS5365N3D-SR20-SR20DET-Chromoly-Forged-Connecting-Rods_p_1367.html
Pistons (stock bore): http://www.frsport.com/CP-Pistons-SC7325-325-Nissan-SR20DET-86-5mm-9-1_p_8504.html
Ignore the fact that theyre dirty, pic was taken right when they where pulled.
New these are $1106.32 from FRsport without bearings, plus bearings, plus tax, plus shipping
I'll sell them for $800 with rod bearings.
https://farm8.staticflickr.com/7252/14010997074_4d1b357831_z.jpg
SR20 Oil pan, scratches but no dents $50
https://farm3.staticflickr.com/2923/14023019471_bdaa06bbd6.jpg
SR timing chain guides. Like new very little wear $60
https://farm8.staticflickr.com/7169/13988541606_a01235d43b.jpg
SR valve cover, with gasket. $70
https://farm8.staticflickr.com/7127/14008447642_7e6a7dc1b4.jpg
SR valve shims, $60
https://farm3.staticflickr.com/2908/13988517236_10b454e390.jpg
SR20 red top head (with cam caps and rockers, not pictured), about 15,000 miles on rebuild. take all of it $300
lifters $80
rockers $80
springs $40
valves $60
bare head and caps $75
https://farm8.staticflickr.com/7158/13992794453_44797b0fdd.jpg
SR20 Oil block with sensor $50
SR20 Cam angle sensor sold
SR20 motor mount brackets sold
SR20 Alternator bracket $40
SR20 Dipstick $40
SR20 Coil pack sub harness, $30
SR20 Knock Sensor and harness $35
SR20 OEM Intake support $20
SR20 Coolant block with sensors and lines $60
SR20 Dust sheild tranny plate $50
https://farm8.staticflickr.com/7393/13901930801_0aa0399a15.jpg
SR20 Intake top Half $40
SR20 Intake Bottom Half $35
SR20 Fuel Rail $30, +$10 for caps and screws (not pictured)
https://farm8.staticflickr.com/7435/13902083916_f226087414.jpg
HKS Cam Gears, asking for $260, these retail for $380
https://farm8.staticflickr.com/7334/13919646331_ddf60a1107.jpg
SR20 Rockers, $80
SR20 Crank Pulley $50
SR20 Head Bolts and Washers $50
SR20 OEM Water Pump with low miles sold
https://farm6.staticflickr.com/5242/13936385276_74a832aa54.jpg
Will Update with more later! Complete engine is being parted out. Forged bottom end, Head and block, Accessories, N62 maf and plug.
OTHERS
DEI Turbo heat sheild and header wrap. its all in there and brand new. $50
https://farm4.staticflickr.com/3820/13495549455_5ed961c5df.jpg (https://flic.kr/p/myydFa)
BEGI Fuel pressure regulator $80.
http://farm8.staticflickr.com/7313/12992810895_17207a2703.jpg (http://flic.kr/p/kN8y1X)
Located in Canada! I ship to the states weekly though so thats not a big deal.
Paypal or cash
PM or text if interested 705 441 2693
I'm parting out pretty much complete car lots of OEM and aftermarket stuff. I'll update it as I go along but here's a start. All parts are for s13 SR unless otherwise stated
ASK ME ABOUT ANY OEM PART NOT MENTIONED AS IM PARTING A WHOLE CAR
SR20 Eagle Rods and CP Pistons,
Rods: http://www.frsport.com/Eagle-CRS5365N3D-SR20-SR20DET-Chromoly-Forged-Connecting-Rods_p_1367.html
Pistons (stock bore): http://www.frsport.com/CP-Pistons-SC7325-325-Nissan-SR20DET-86-5mm-9-1_p_8504.html
Ignore the fact that theyre dirty, pic was taken right when they where pulled.
New these are $1106.32 from FRsport without bearings, plus bearings, plus tax, plus shipping
I'll sell them for $800 with rod bearings.
https://farm8.staticflickr.com/7252/14010997074_4d1b357831_z.jpg
SR20 Oil pan, scratches but no dents $50
https://farm3.staticflickr.com/2923/14023019471_bdaa06bbd6.jpg
SR timing chain guides. Like new very little wear $60
https://farm8.staticflickr.com/7169/13988541606_a01235d43b.jpg
SR valve cover, with gasket. $70
https://farm8.staticflickr.com/7127/14008447642_7e6a7dc1b4.jpg
SR valve shims, $60
https://farm3.staticflickr.com/2908/13988517236_10b454e390.jpg
SR20 red top head (with cam caps and rockers, not pictured), about 15,000 miles on rebuild. take all of it $300
lifters $80
rockers $80
springs $40
valves $60
bare head and caps $75
https://farm8.staticflickr.com/7158/13992794453_44797b0fdd.jpg
SR20 Oil block with sensor $50
SR20 Cam angle sensor sold
SR20 motor mount brackets sold
SR20 Alternator bracket $40
SR20 Dipstick $40
SR20 Coil pack sub harness, $30
SR20 Knock Sensor and harness $35
SR20 OEM Intake support $20
SR20 Coolant block with sensors and lines $60
SR20 Dust sheild tranny plate $50
https://farm8.staticflickr.com/7393/13901930801_0aa0399a15.jpg
SR20 Intake top Half $40
SR20 Intake Bottom Half $35
SR20 Fuel Rail $30, +$10 for caps and screws (not pictured)
https://farm8.staticflickr.com/7435/13902083916_f226087414.jpg
HKS Cam Gears, asking for $260, these retail for $380
https://farm8.staticflickr.com/7334/13919646331_ddf60a1107.jpg
SR20 Rockers, $80
SR20 Crank Pulley $50
SR20 Head Bolts and Washers $50
SR20 OEM Water Pump with low miles sold
https://farm6.staticflickr.com/5242/13936385276_74a832aa54.jpg
Will Update with more later! Complete engine is being parted out. Forged bottom end, Head and block, Accessories, N62 maf and plug.
OTHERS
DEI Turbo heat sheild and header wrap. its all in there and brand new. $50
https://farm4.staticflickr.com/3820/13495549455_5ed961c5df.jpg (https://flic.kr/p/myydFa)
BEGI Fuel pressure regulator $80.
http://farm8.staticflickr.com/7313/12992810895_17207a2703.jpg (http://flic.kr/p/kN8y1X)