PDA

View Full Version : R33 GTS-T Diff or is it?


CaliforniaMayhem
08-04-2014, 03:21 PM
So I purchased a complete rear end awhile back and it came with what I was told a R33 gtst diff. These are suppose to have 4.x ratios and have 5 bolt flanges. Mine appears to fit the look of it.

Then problem is my internals don't seem to match up to the specs unless I'm reading the information wrong.

Can someone help me figure out what diff this is?

Crown wheel has 47 teeth
Pinion has 15
That equates to a 3.13333 ratio...I have not seen this posted anywhere in the r200 diff searches I've performed. Ami calculating this wrong?

CaliforniaMayhem
08-04-2014, 04:03 PM
On the crown wheel these #s are shown "S17:15x 3 6 28"

e1_griego
08-04-2014, 05:14 PM
There's not a ratio stamp on the ring gear?

http://image.modified.com/f/tech/17373541+w799+h499+cr1+ar0/sccp_0903_14_z%2Bproject_s13%2Bfinal_drive_gear_ra tio.jpg

CaliforniaMayhem
08-05-2014, 12:42 PM
Hm.. I might have a pathfinder Diff... I'll have to take a look tonight but if that's the case... I'll be running 3.13333 in a stock KA so great gas mileage? haha.

http://zilvia.net/f/showthread.php?t=267957

CaliforniaMayhem
08-05-2014, 12:43 PM
There's not a ratio stamp on the ring gear?

http://image.modified.com/f/tech/17373541+w799+h499+cr1+ar0/sccp_0903_14_z%2Bproject_s13%2Bfinal_drive_gear_ra tio.jpg

My crown wheel says S17:15 x3 6 28

I tried googling it and got whack results. Also, I can't upload the picture for some reason.