1/8" BSPT Dual 1/8" NPT Oil Pressure Sensor Fitting. KA/SR/RB/VQ, Most imports

[autotechmotoring]

Selling custom oil pressure sensor adapter. This was CNC made from 303 stainless steel. Asking 32.00 shipped

It has:
(1) 1/8" BSPT male (thread into factory oil pressure sensor location)
(2) 1/8" NPT female ( to run a external sensor for pressure gauge and oil feed)
(1) 1/8 BSPT female ( to install the factory sensor back in)

Most out there are brass fittings that tend to crack over time and you have to use a few tees etc to make a setup to work. And this is the correct thread BSPT for the sensors.

http://i862.photobucket.com/albums/ab188/eybs_1977/sensoradapter_1_zpsbe89d0d8.jpg (http://s862.photobucket.com/user/eybs_1977/media/sensoradapter_1_zpsbe89d0d8.jpg.html)

http://i862.photobucket.com/albums/ab188/eybs_1977/sensoradapter_2_zps426aa616.jpg (http://s862.photobucket.com/user/eybs_1977/media/sensoradapter_2_zps426aa616.jpg.html)

[zurud]

Does it work on sr20det.? sr20det is tight around oil filter area. Turning oil pressure sensors horizontally will hit the starter or oil filter.

[Def]

Does it work on sr20det.? sr20det is tight around oil filter area. Turning oil pressure sensors horizontally will hit the starter or oil filter.

Yes, I used a Nissport adapter that's basically the same for about 9 years.

[autotechmotoring]

Does it work on sr20det.? sr20det is tight around oil filter area. Turning oil pressure sensors horizontally will hit the starter or oil filter.

Yes as the previous poster said, it does work and clear no issues. The picture may make it seem big piece, but its not.

[sarhd]

Payment sent

[mugenworks247]

Paypal info and does this fit a greddy oil pressure sending unit ? I have the older style 60 mm electronic gauge

[autotechmotoring]

Paypal info and does this fit a greddy oil pressure sending unit ? I have the older style 60 mm electronic gauge

PM sent to you

[autotechmotoring]

Still available!

[autotechmotoring]

Still available!

[voiddweller]

Very nice. Looks just as good as NISPORT. Good for keeping the stock and aftermarket sensors at the same time.

[autotechmotoring]

Still available!

[hardcorps135]

Just installed mine that I've had for months along with my HKS oil pressure gauge and stock pressure sensor and it's amazing. Used a brass plug you can get from your local hardware store for the unused port and no issues what so ever. Only thing is if you're going to use your stock manifold you will have to remove one of the bottom manifold support brackets for it to fit. Otherwise, works as advertised. :).

Free bump for easy solution rather than block adapter and relocation kit.

[BiG MiKE86]

ill take one of these

[autotechmotoring]

ill take one of these

PM'ed you Paypal info. Thanks!

[BiG MiKE86]

Payment Sent

[SilviaSR20DET]

Good quality stuff! works like a charm. free bump!

[BiG MiKE86]

Anyone use these on a 2jz-gte? Trying to think of a spot for this to run my pressure gauge

[autotechmotoring]

Anyone use these on a 2jz-gte? Trying to think of a spot for this to run my pressure gauge

Yes it has been ran on 2JZ's before, but I dont have any pictures of it.

[autotechmotoring]

still available!

[autotechmotoring]

still available!

[autotechmotoring]

Still available!

[voiddweller]

A suggestion for those using this awesome adapter: attach it to a stainless steel line and attach the line to the motor, especially if you're running solid motor mounts. Over time, I've seen vibrations cause small leaks. If your motor is fairly dampened, just attach it directly.

I'm happy to see this part again, especially after NISPORT basically disappeared from the scene.

[autotechmotoring]

still available!

[autotechmotoring]

still available!

[autotechmotoring]

bump still available!

[autotechmotoring]

Still available!

[autotechmotoring]

still available!

[autotechmotoring]

Still available!

[autotechmotoring]

bump still available!

[dyjjjcfg]

Good quality stuff! works like a charm. free bump! http://financede.com/apple/images/40.gif

[kfurman2]

what part of california are you located?

[autotechmotoring]

bump still available!

[s14kkouki]

Does this piece fit a ls1?

[autotechmotoring]

Does this piece fit a ls1?

Domestic engines usually uses NPT or something standard. BSPT is usually only in imports as stated in title.

[crewchief05]

Interested!!! Would these still need an extension(or adapter) for a aftermarket temp sensor? looks identical to the Brass versions (size) which do.

[autotechmotoring]

Interested!!! Would these still need an extension(or adapter) for a aftermarket temp sensor? looks identical to the Brass versions (size) which do.

No does not need an extension as far as I know. You can thread any 1/8" NPT temp sensor into one of the ports.

[jackasspyro2]

if we do not use all of the ports where would be the best place to find plugs or bolts to fill the empty spots?

[autotechmotoring]

bump still available!

[autotechmotoring]

if we do not use all of the ports where would be the best place to find plugs or bolts to fill the empty spots?

I can give you a port plug for one of the NPT holes. More than likely you will use the back 1/8" BSPT to thread your sensor back in.

[autotechmotoring]

bump still available!

[theultimatehero]

I'm interested, PMing.

[autotechmotoring]

still available!

[richmond82]

what is the price on this fine piece?

[autotechmotoring]

what is the price on this fine piece?

32.00 shipped

bump still available!

[autotechmotoring]

bump still available!

[autotechmotoring]

bump still available!

[autotechmotoring]

bump still available!

[autotechmotoring]

bump still available!

[autotechmotoring]

bump still available!

[autotechmotoring]

bump still available

[autotechmotoring]

bump still available!

[autotechmotoring]

bump still available!

[autotechmotoring]

bump still available

[autotechmotoring]

bump still available. Text 949-351-2958 for faster response

[lucas240sx]

Text sent to you

[Blue zenki]

Do you have one available still?

[Nissan206]

PayPal sent.

[lucas240sx]

Paypal sent

[autotechmotoring]

Still available!

[lucas240sx]

9 days later the part had finally been shipped to me after I had to ask about it

[Patputter14]

I'd like to get one of these.

[autotechmotoring]

Bump still available!

[autotechmotoring]

Bump still available!

[autotechmotoring]

bump still available

[BluRider17]

You still have some bro available?

[BluRider17]

Still available?

[boosted23]

I would like one if still available

Sent from my SM-G900V using Tapatalk

[autotechmotoring]

bump still available!

[boosted23]

How do I order one from you?

[autotechmotoring]

bump still available!

[autotechmotoring]

Bump still available!

[nextproject]

Question, which end is the female BSPT port on? the end opposite the male end? or is it a side port?

[autotechmotoring]

Question, which end is the female BSPT port on? the end opposite the male end? or is it a side port?

Opposite end. The 2 center are NPT

[boosted23]

Opposite end. The 2 center are NPT

I would like to purchase one. I have an rb20det. How do I purchase. Thanks

Sent from my SM-G900V using Tapatalk

[thegray7thgen]

Is there any way I could come locally to pick this up? Im in need of one and would very much appreciate if I could swing by today. I tried to PM you but it doesnt allow me to.

[JSimpson]

Is there any way I could come locally to pick this up? Im in need of one and would very much appreciate if I could swing by today. I tried to PM you but it doesnt allow me to.

LOL man come on the user is banned from the marketplace..... Bold letters right by where you clicked to PM him. However I think you can just order one off of their website http://www.autotechmotoring.com