PDA

View Full Version : FS: Used Greg Dupree Subframe Spacers $50 shipped


drift into a curb
07-01-2004, 01:48 AM
$50 shipped. No if's, and's, or but's. E-mail me if you're interested, [email protected] Located in Anaheim, CA.

http://www.powertrix.com/s13spacers.JPG

240KAT
07-01-2004, 09:23 AM
will you take trades?

ch1873857
07-01-2004, 09:28 AM
hmmm you have to drop the subframe for these right?

GonadSX
07-01-2004, 02:12 PM
These spacers bolt right in. You simply unbolt the 4 bolts holding the
subframe and then stick the spacers in and bolt back up.

I believe the other spacers out there include 6 pieces. 4 pieces as shown
here plus 2-additional pieces with an open end cut. These open end pieces
slide in above the rear subframe point.

These ones pictured are similar to the ones by PDM-Racing.

TheTimanator
07-01-2004, 02:37 PM
You've got mail.

ch1873857
07-01-2004, 03:14 PM
These spacers bolt right in. You simply unbolt the 4 bolts holding the
subframe and then stick the spacers in and bolt back up.

I believe the other spacers out there include 6 pieces. 4 pieces as shown
here plus 2-additional pieces with an open end cut. These open end pieces
slide in above the rear subframe point.

These ones pictured are similar to the ones by PDM-Racing.

thats what i thought but a guy on another thread said that if they arent open ended that you have to drop the entire subframes and that it was a pain in the ass

GonadSX
07-01-2004, 06:11 PM
The open-ended ones are different. The open ended ones are collars. Here are the
ones by SPL Parts:

http://www.splparts.com/Parts/_Nissan90/Suspension/SPLSubframeSpacers.jpg

The open-ended ones go above the sub-frame and the closed-end go below.
The ones advertised here only go below, and you hook them up like this.

I'm getting picture horny but here is what the Whiteline Subframe spacers provide (instructions):
So in other words, the ones shown here would be the "All around performance" as shown below:

http://240sx.cubicdesign.com/images/misc/whitelinespacers.jpg

ch1873857
07-01-2004, 06:18 PM
hey thanks man i completely understand now.

silvia lover
07-01-2004, 07:40 PM
I'm wondering how come the price of the set of 4 subframe bushing is so high nowday (sp??) I got my brand new set a while back for little than this. just my thought so don't flame me >_<

drift into a curb
07-01-2004, 09:11 PM
Guess you got a good deal. They're $60 shipped new from PowerTrix and I got mine from their first group buy in 2002 I think. At any rate, they're SOLD. Thanks for inquiring.