rb25 wiring... I think im good but...

[70ina30]

I did follow the rb25 pinout and swapped all of the pins on the f3/m63 plug.
However there are about 12 wires leftover.
Done for an rb25 series 1 into 240sx s14
Some are ground yes, but what about....
Orange /white stripe
Pink
Yellow/ purple
Brown/blue
Orange
Brown/yellow
Green/black
Green/pink

Do these now get routed to the smaller plugs next to the f3 plug in the kick panel

[70ina30]

Ok I found the remaining wires were ground
Abs lsd
Knock sensor
Check signal on diagnostics

Do these stay free or do they get wired up