STACK ST8102 dash - BUDGET BALLER!!!!

[Def]

This is an ST8102 STACK dash in good working condition, 0-8k RPM, 0-3k RPM compressed. Comes with 4 switches, 1 temp sensor, 1 pressure sensor, full harness, speed sensor, infrared lap beacon and receiver, G-sensor.

It is not a base model ST8100, as this comes fully loaded with predictive lap timing. That means that with the beacon setup the dash will be able to give you a real time prediction of your current lap time vs. the fastest lap saved in memory. It works great, and is very accurate.

http://i.imgur.com/hFjKUyt.png

http://i.imgur.com/W9W4kKc.png

http://i.imgur.com/53Q9uhv.png


This is an older dash that has 2 fixed temps (typically oil and water), 2 fixed pressures (oil and fuel). Because it's an older style dash it uses cheap and readily available sensors.

Temp sensor:

http://www.egauges.com/320F-1-8-NPTF-Blade-p/r8959-03.htm

Pressure sender:

http://www.egauges.com/150-PSI-10-Bar-1-8-27-NPT-10-180-Ohms-FG-p/360-430.htm



Installation and programming is easy, just make a dash template and use the pull-up resistor circuit in the manual for the tach.



This was a $3k+ setup when new, selling for just $750 + shipping.

PM me.

[Def]

Still available - feel free to throw out offers - baller STACK dash here.

[Def]

You guys know you're wishing your rusty S-chassis had some STACK dash goodness.

[TEALSQUEAL]

Looking for anything in trade? Bump for a solid seller!

[brndck]

very cool shit. i have an st8130 and i need to order that beacon!!!
do you already have a tach adapter? i used the auto meter one and it worked fine.

[Def]

Looking for anything in trade? Bump for a solid seller!

Not really at this time. I've got more parts waiting to go on than I know what to do with.

very cool shit. i have an st8130 and i need to order that beacon!!!
do you already have a tach adapter? i used the auto meter one and it worked fine.

You don't need a tach adapter, just follow the diagram for doing a pull up resistor to the stock tach wire in the dash harness.

The install actually isn't very hard, took me an afternoon.

[Def]

Throw out some offers. This is a rare deal for a predictive lap timing stack dash.

[brndck]

You don't need a tach adapter, just follow the diagram for doing a pull up resistor to the stock tach wire in the dash harness.

The install actually isn't very hard, took me an afternoon.

really? i never got it to work via the manual diagrams. i ended up calling stack and they recommended a tach adapter, which solved the problem.

also, i still have a Sard carbon fiber bezel that fits stack clusters. it is for s15 dash but may be able to fit others with some custom work
http://zilvia.net/f/showthread.php?t=538829&highlight=sard+stack

[Def]

Yep, works just fine on my ST8103:

http://i.imgur.com/EnfIBt6.png


It also has predictive lap timing, which is why I know it's so awesome. :)

[Def]

Price drop - $700