Tons and Tons of OEM S13 parts take a look!

[anti tyler]

UPDATED: 02MAY2017

PARTS;




Control modules? Unsure of which.


http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/CD67528B-DC57-45E5-8C49-5A68B32C3569.jpg

Couple bushing kits left from my master set;

Subframe inserts

http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/FC401341-FB62-40F9-9B34-E9F7B5A07295.jpghttp://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/49C4C146-A585-44C3-9907-9328CFBB7214.jpg
http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/98C739D2-1BC3-47FF-9391-D3E21EB242BF.jpg




Upper door outer trim



http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/90C32F6C-65AB-4E62-8D73-0ACF3049805D.jpg






FELPRO stock S13 KA24DE head gasket / exhaust manifold gasket set


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/D07A8C64-547C-4484-BA57-1F4644128030.jpg

NEW no name KA intake pipe with all fittings/hoses/clamps

MISC suspension bolts / injector caps / rack&pinion mount / sway bar mounts / X3 subframe brackets & bottom cups / REAR exhaust hanger


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/F55FB10F-0D41-4D58-8A6A-A716ADF549F1.jpg






1 SET Z32 2+0? CABLES (SHORTER)
http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/7AE8B2BA-C2EA-45D2-BBD4-A985555E996D.jpg
http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/852CC492-2C0E-47F5-A10B-8C763C492279.jpg

[anti tyler]

Continuing on to today's updates in listing.


All previous items are still for sale as of now.



Misc 300z brake gear.

http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/4CD10575-C2F7-4223-A9A6-1AA1EED7B721.jpg






S13 hatchback engine bay harness, need something cut? let me know.




http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/D2013B4A-5323-490A-95AD-C1747BD04C5B.jpg





S13 power plugs MALE


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/3B1A3235-DEB1-4749-8CCB-FF5C29F33515.jpg



S13 distribution plugs


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/C5505F98-5655-425F-B42B-88AE33FCA252.jpg




S13 KA24DE engine harness, some cuts.


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/F693060F-A519-4D93-8AEA-72D2B7577453.jpg



Storage lot #1

http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/7a487554-63a2-43d8-b17b-5d3f4dcb49b0.jpg




Storage lot #2 SOLD= OUTPUT SHAFTS CARRIER BEARING MOUNT

http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/22cff07b-9e93-4c70-b1d8-dad7b88d04b7.jpg



Storage lot #3


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/d46d17b9-4c01-46f1-ba6a-d873d4de030c.jpg


Storage lot #5 SOLD= TURN SIGNAL SOCKETS


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/a7369bae-1321-4976-ae0b-bf6b613b65c5.jpg


Storage lot #6 SOLD= BLOWER MOTOR DOOR DINGER

http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/cbcf575d-8909-46b8-a8ee-677d58fa5b1a.jpg



Storage lot #7


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/77bb49df-ffe6-4745-a290-75e1265c8845.jpg


Storage lot #8


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/edf36473-1920-4440-9a03-914bd4f2ace6.jpg



Storage lot #9 SOLD= X2 STRUT TOWER CAPS


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/a3e53e6b-bb50-4aa6-a22a-f82cb1ddb206.jpg


Storage lot #10
KA24DE header and test pipe


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/7BECA95D-71F1-48CC-B7F3-6DF648D8C399.jpg
http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/56D02C04-4CEE-4D8C-895D-744268F759FC.jpg



Storage lot #11


http://i1135.photobucket.com/albums/m639/ascities/car%20for%20sale/dec%2016%20storage%20sale/56D02C04-4CEE-4D8C-895D-744268F759FC.jpg

[Konster]

Any chance you have the stock Chuki lip?

[anti tyler]

Good question, I've always wished I did so I could sell it. But no, none of my cars have a chuki lip. I do however have a pignose bumper intact with turn signals!

[Konster]

Goddammit.

[dosstat]

Free bump for neat post.

Edit: Came looking for ka24de engine harness, didn't see one listed. Happen to have one?

[anti tyler]

Free bump for neat post.

Edit: Came looking for ka24de engine harness, didn't see one listed. Happen to have one?


Here's the deal with that one... I have an engine harness in a medium flat rate box right now. It has a cracked ECU plug. But it came off the car in perfectly fine running condition, with that exception.

I sold it to a kid and he claims it's for a SOHC. I call bullshit but I refunded him anyway.

It's up to you if you want it. $12 shipping. $40 shipped.

[terrance john]

How much for driver side fender


Sent from my iPhone using Tapatalk

[anti tyler]

How much for driver side fender


Sent from my iPhone using Tapatalk


Sorry sir that shell does not have a driver side fender. Just a passenger side. But if you'd like that one then throw me an offer.

As I stated in the original post there are no prices, just your offer! I both need and want it all gone. But not thrown away.

[dosstat]

No thanks on the harness but I will take that driver side kick panel and I'm looking for the right rear speaker panel and cover as well.

Edit: For hatchback

[anti tyler]

Here are the pictures of this mystery harness. Definitely will sell it for under $40 shipped if you want to give it a shot. I can tack the ecu plug back into 1 piece also. As well as re-connect a spade connector for the CTS. I ripped it off accidentally.

http://i1135.photobucket.com/albums/m639/ascities/garage%20sale/A81C50DB-EE49-463A-A20A-6A8CF685BAC5.jpg
http://i1135.photobucket.com/albums/m639/ascities/garage%20sale/174AC1BB-44C9-4791-8BAB-CCC017CB85C5.jpg
http://i1135.photobucket.com/albums/m639/ascities/garage%20sale/A8610370-6540-4700-811A-A7A090EDC91E.jpg
http://i1135.photobucket.com/albums/m639/ascities/garage%20sale/FFE4A329-6FF0-4C66-B94E-0A37755ABD94.jpg
http://i1135.photobucket.com/albums/m639/ascities/garage%20sale/336ACA6C-BB4C-48DE-8ECB-E95ABEBB0BE0.jpg






No thanks on the harness but I will take that driver side kick panel and I'm looking for the right rear speaker panel and cover as well.

Edit: For hatchback


Okay that I can do. I don't have the panel cover for the right side unfortunately. Not totally ready to start pulling parts off the DD yet.

[dosstat]

That harness is a dual cam harness with a single cam dash connector on it. Probably why the guy returned it. I'll do 40 paypaled and shipped for it and the kick panel if you tack it back together and fix the connector

[anti tyler]

That harness is a dual cam harness with a single cam dash connector on it. Probably why the guy returned it. I'll do 40 paypaled and shipped for it and the kick panel if you tack it back together and fix the connector



Harness was sold, I wasn't really into trying to splice it together lol. That's how it came off the car and it worked fine when I pulled it out.

Kick panel is still available if you'd like that though.

[yacubkep]

Need hatch plastic left and right sides... plus tons more shoot me a pm

[anti tyler]

Need hatch plastic left and right sides... plus tons more shoot me a pm



Sent a Pm. There aren't really any plastics in the hatch except speaker covers lol. explain please!

[anti tyler]

Sunday Bump.

[anti tyler]

Mid day Tuesday bump.

Taking all offers, I'd rather not have to load this stuff up to trash it.

[s13_chris93]

have sr fan shroud?

[anti tyler]

have sr fan shroud?


No unfortunately I don't have ANY SR parts

[KoukiMonsta]

Oem ps reservoir? Pm me if so

[anti tyler]

It's been 24 hours,, liking the new bump rules on the forums! Sold a few parts in the past hours. come and get your OEM parts at cheap prices before I sell them on eBay! lol. cheap ass prices, you pay the shipping and get what you want!

[cerealwars]

Hey man, how much for the front caliper brackets shipped to 49307? PM me if you could.

[anti tyler]

Hey man, how much for the front caliper brackets shipped to 49307? PM me if you could.


PM'd


4th of July bump. Stuff is slowly selling, Hit me up on multiple parts for a discount!

If I can fit 2+ things in a priority box you WILL save $$$.

[blackassassin0]

The steering wheel 07003?

[jspec]

I saw you have an electric fan on that radiator. Interested in just the fan. Willing to sell just the fan? Let me know and a price.

[anti tyler]

The steering wheel 07003?
Steering wheel is used and has wear but I will sell at a discounted price just pay the shipping. I don't think it'll fit in a priority box so Monday I will get you an exact quote for it
I saw you have an electric fan on that radiator. Interested in just the fan. Willing to sell just the fan? Let me know and a price.

I believe I have a spare 12" or 13" fan in almost new condition I can sell for $15 plus shipping. Otherwise I'll sell you this fan for $13 plus shipping. Let me find out over the weekend.

[NISSeAN]

passenger side headlight assembly? 49719

[FRhatch]

Hey do you have any ac lines for sale? Shipped to 20653

[on3lv3]

I'm looking for both door trim pieces on the B pillar. In pic #61. For sale?


Sent from my iPhone using Tapatalk

[anti tyler]

passenger side headlight assembly? 49719

I have both assemblies, but shipping is going to be tough. Throw me an offer on the entire assembly. If you want the motor it's an additional $10. I typically sell them on ebay for $34 shipped.

Hey do you have any ac lines for sale? Shipped to 20653

No AC lines, I have no AC anything except the stuff under the dash.

I'm looking for both door trim pieces on the B pillar. In pic #61. For sale?

You need the outter B pillar covers? I do have those. Throw me an offer on the two. It'll be $12 shipping (priority flat rate)

[on3lv3]

I need the whole molding both rubber and plastic as well. $40 shipped?


Sent from my iPhone using Tapatalk

[anti tyler]

I need the whole molding both rubber and plastic as well. $40 shipped?


Sent from my iPhone using Tapatalk

Wait so not those straight b pillar covers? But the rubber moulding that spans the top of the door frame?

[on3lv3]

Wait so not those straight b pillar covers? But the rubber moulding that spans the top of the door frame?


Actually both. Pretty much everything that surrounds the door


Sent from my iPhone using Tapatalk

[anti tyler]

Actually both. Pretty much everything that surrounds the door


Sent from my iPhone using Tapatalk

Alright what about the long metal trim that goes above the door, that too or no?

[on3lv3]

Alright what about the long metal trim that goes above the door, that too or no?


Yes that too.


Sent from my iPhone using Tapatalk

[anti tyler]

Yes that too.


Sent from my iPhone using Tapatalk


Oh okay that's a different story then lol.

Give me a zip code so I can estimate shipping for that. It's going to be a 48" x 17" box because of the length of those metal trim pieces.

But we can negotiate price from there.

As of now you have the Small B-pillar covers, the weather stripping that wraps around the top of the door and fits until the black metal outer trim.

Are you missing the inside piece that bolts to the chassis and holds that outter metal strip also?

[on3lv3]

Oh okay that's a different story then lol.

Give me a zip code so I can estimate shipping for that. It's going to be a 48" x 17" box because of the length of those metal trim pieces.

But we can negotiate price from there.

As of now you have the Small B-pillar covers, the weather stripping that wraps around the top of the door and fits until the black metal outer trim.

Are you missing the inside piece that bolts to the chassis and holds that outter metal strip also?


Yes missing everything. Zip is 89117


Sent from my iPhone using Tapatalk

[anti tyler]

Yes missing everything. Zip is 89117


Sent from my iPhone using Tapatalk


It's going to be pretty much $38 no matter what way I do it. USPS is showing standard post being $38.70 Whether it's 4lbs or 8lbs. I can try ups or fedex if you'd like.


Alright I'm gonna go with UPS on this. They're going to be just over $25. So I'll give you a break on it and call it $20 shipping.

[on3lv3]

It's going to be pretty much $38 no matter what way I do it. USPS is showing standard post being $38.70 Whether it's 4lbs or 8lbs. I can try ups or fedex if you'd like.


Alright I'm gonna go with UPS on this. They're going to be just over $25. So I'll give you a break on it and call it $20 shipping.


So I was able to find the long trim piece locally but I still need the b pillar molding. For those 2 pieces can you do $20 shipped?


Sent from my iPhone using Tapatalk

[anti tyler]

Bump, Lots of things selling. List updated.


Still have plenty left, also plenty left on the chassis.

Don't see it listed? ASK. **I do not have any S14 or SR parts unfortunately**

[anti tyler]

Much rather be replying to questions and such than my own replies. Friday bump.

Here on out, on certain items buy 2 items and get a discount.

Certain items I'll give more $$ off of than others. if you need anything specific throw me an offer. Just remember you're paying shipping! Not me.

[cerealwars]

Bonus bump for a dude who sells promptly at good prices.

[anti tyler]

Sunday bump, Many items sold over the weekend, Many items still available.


Come and get it so I can scrap this thing and regain my parking spot.

[mightys88]

Lower plenum shipped to 91764? Pm pls

[CookiesNCream]

How much for tcu, carpet holder trim pieces, and steering column cover. I'm not sure if that's the proper name for that but it's in a picture just not numbered. The plastic piece that covers between the steering wheel and cluster. Shipped to 30252.

[anti tyler]

Lower plenum shipped to 91764? Pm pls

I probably should have listed more information on that, It doesn't have the throttle body or throttle position sensor. It does not have the EGR as well.

Selling it as is for $25 Plus $16 priority mail.


How much for tcu, carpet holder trim pieces, and steering column cover. I'm not sure if that's the proper name for that but it's in a picture just not numbered. The plastic piece that covers between the steering wheel and cluster. Shipped to 30252.


I'm an idiot sorry, those are harness protectors not carpet holders.

But for the TCU and steering column cover I'll sell for $18 plus shipping.

[anti tyler]

Doing a 24hr type blowout. Everything needs to go, combined shipping on anything that fits in a flat rate box.

[silviamode]

black ecu kick panel still for sale?

[anti tyler]

black ecu kick panel still for sale?
pm'd


still selling this stuff. just got a trailer and am loading up junk to throw away getting ready to junk most of these parts if they don't sell

[anti tyler]

Sunday bump, Got a lot of interest on the car with extra parts on facebook.

Get whatever you need before I throw it all into a bundle with the car.

[T_wo.and.T_one]

Bump, good seller/nice post layout.

[anti tyler]

Bump, good seller/nice post layout.


Thanks, scrapping her next week to get some extra cash for wedding planning.

I'd hate to take more OEM parts off the market since there's so few out there now.

get some calipers, seat belts, trim pieces, master cylinders etc. while they're still available.

[anti tyler]

Waited 2 weeks for this!

Hood/hatch/pignose are all gone.

[anti tyler]

Still have plenty of parts left. combine shipping on all that fits in 1 box

[ukrainekid]

Do you have the radio trim??

[emmanuelvm17]

Do you have a working passenger side seatbelt motor with belt?

[fuerte]

price on the seat belts shipped to 29420?

[1997RbS14]

Why was the trans tunnel cut out?

[anti tyler]

Do you have the radio trim??

I have a radio trim I bought from someone on here that I never installed, so yes.

Do you have a working passenger side seatbelt motor with belt?

You mean the whole seat belt motor & track as well as the retractable shoulder belt? If so I have everything but the shoulder belt.

price on the seat belts shipped to 29420?

Which seat belts are you wanting, the lap belt pair/ rear shoulder pair etc

Why was the trans tunnel cut out?


Trans tunnel was cut because it had an older V8 inside of it. other than that there are no cuts on the car.

[kingmulky]

Do you still have the metal window trim that goes above the door? I'm also looking for the wiper motor and pigtail.

[anti tyler]

Do you still have the metal window trim that goes above the door? I'm also looking for the wiper motor and pigtail.



I have the metal trim on both doors still, but no wiper motor left.

[emmanuelvm17]

Pm sent for seat belt motor

[anti tyler]

Had a group of people interested in parts the past 3 days but no one replied to my PM's...

Bump

[anti tyler]

Updated listing with new prices and a couple new items (z32 n62 MAF & z32 BMC)

All prices are negotiable, looking to sell most of this stuff asap. Just transferred job locations and have been getting a lot of interest in my car and potential parts for sale from the locals.

Pay shipping and $5-10 for most parts and they're yours!

[anti tyler]

Added a few non car parts, updated prices and available items. More parts to be added shortly.

[anti tyler]

Tap and die set sold, everything else left.

Almost have my shed back bump

[cerealwars]

Hey man, was wondering if you'd have a few more parts that for the most part aren't listed.
- Analog instrument cluster
- Exterior driver's side door handle
- Instrument cluster trim buttons (CC off, CC up/down, and the coin holder thingy)
- Trim for the center two heater vents in the middle of the dash
- Driver's side window motor/regulator (doubt it but figured I'd ask)

[anti tyler]

Hey man, was wondering if you'd have a few more parts that for the most part aren't listed.
- Analog instrument cluster
- Exterior driver's side door handle
- Instrument cluster trim buttons (CC off, CC up/down, and the coin holder thingy)
- Trim for the center two heater vents in the middle of the dash
- Driver's side window motor/regulator (doubt it but figured I'd ask)


Sorry I don't have a cluster anymore sold early this year off my first parts car.

I do have a door handle but I was kind of hoping to keep it on the manual doors unless I can be persuaded otherwise.

I have cluster buttons (Cruise on/cruise off. + coin holder

I've got the pair of center vents but the trim for them has been broken off of both dashes I have.

Regulator went with the power doors unfortunately

[anti tyler]

Updated the list, Full subframe available along with differential gear.

[anti tyler]

Monday evening bump. Building another ka-t, need to fund some extras!

[anti tyler]

Found a few extra after market parts, have a lot left over as well as a shed full of things like new spark plugs, wires, replacement sensors etc...

I also work at an auto parts store so access to tons of parts!

[acslater9]

Happen to have a stock air intake for a ka24e laying around?

[anti tyler]

Happen to have a stock air intake for a ka24e laying around?

No sir, I had a ka24de one but it went with a few other parts

[rollinsstewart]

clutch/brake pedal assy?

[anti tyler]

clutch/brake pedal assy?

Only have an automatic brake pedal left. Manual pedal & clutch have been sold

[anti tyler]

Sold a hatch w/glass, front windshield, pignose bumper & hood.

Plenty of other parts left.

[anti tyler]

Trying to fund buying a new shell, see a lot of people looking for stuff I have but they're not asking for it!

[lg54]

fan clutch????

[anti tyler]

Listing updated as of this very moment. Let me know what you need if it's not listed. Tons of parts added to the list.

[OkiDori17]

You have an S13 KA DOHC power steering pump by chance?

[anti tyler]

You have an S13 KA DOHC power steering pump by chance?

I do not, I thought I bought one as a replacement but couldn't locate it

[OkiDori17]

Damn.
I've been looking everywhere.

Good luck with everything else.

[anti tyler]

Damn.
I've been looking everywhere.

Good luck with everything else.



Give me 72hrs I'm meeting an old local friend who bought 3 of my hatches this weekend. He is in talks with me on PS pump and bracket. I may have one available in the next 3 days depending on his availability on Friday/Saturday

[Macaronnie]

flywheel dust shield for a manual transmission by any chance?

[anti tyler]

flywheel dust shield for a manual transmission by any chance?

Unfortunately that is only available on my DD. so if you've got a good price shipped I may consider it lolz

[RNGWLD]

Looking for:

-Hood latch
-Pass side pop up headlight motor assembly
-Bolts that hold the fenders to chassis if you have them.

[anti tyler]

Looking for:

-Hood latch
-Pass side pop up headlight motor assembly
-Bolts that hold the fenders to chassis if you have them.


I have a hood latch assembly that bolts by 3 bolts to the front assembly.

The passenger assembly is in pieces and would cost a pretty penny to ship

The bolts that hold the fender to the chassis are readily available.

[anti tyler]

Bump,Black Friday deals are extended until jan 1st, I know you just got a $500 set of kouki tail lights, now buy the stock parts you needed to begin with. Shoot me an offer and let's negotiate.

[Slidewayz90]

do you still have the LHD brake booster heat shield?

[anti tyler]

do you still have the LHD brake booster heat shield?



I sure do, I'll even clean it and paint it if you'd like.

[anti tyler]

Shipped out 5 things today, Plenty left, Help me strip this coupe so I can scrap the shell!

[dizzariot]

Got any Advan varsity jackets? Free bump.

[anti tyler]

No advan jacket. I see a lot of people asking for parts that I have, they just aren't asking me for them!

[anti tyler]

List updated, some pending sales.

Get the items you need now before the holidays cause shipping delays.

[Patrat81]

I need the radiator. Can you PM me?

[anti tyler]

Started parting out the coupe for scrap.

Clutch/FLCA's/ engine harness SOLD!


Lots of stuff left, parting the coupe completely. If you need any parts off a full car, ask!

[chimyboy]

How much to ship #22?

[anti tyler]

If you need just the power steering cooler lines that are pictured in the second post then it wont cost a lot.

[anti tyler]

Messaged 12 people looking for parts I had, that were replying to for sale ads recently.

Tons of parts, low prices, clear my shed and driveway, get a good deal, and stop paying higher prices!


I've currently got a full car worth of parts and 3 parts cars worth of parts. minus a rear pass. Caliper! Currently parting a full coupe including the chassis harness!!

[Patrat81]

I need the Power Steering lines. Could you please PM me. I have multiple questions regarding parts.

[joshg51]

Drive shaft brackets and bolts? Also got a s13 speed sensor?

[anti tyler]

Drive shaft brackets and bolts? Also got a s13 speed sensor?

What bracket, the center carrier bearing holder?

[TLoke13]

How's the front and rear wheel hub assemblies? Any studs stripped out?

[anti tyler]

How's the front and rear wheel hub assemblies? Any studs stripped out?


Have 2 full sets I believe. Not sure on stud condition I would change them either way. Good thing is, I throw in all new studs with each hub. I can put them in for you with my press for $6 extra or you can install them yourself.

Front hubs; $40 shipped priority
Rear hubs; $40 shipped priority.

If you buy the set; $63 shipped priority including all new studs.

[Ilya]

S13 stock front shock housings? I don't need the spring

[anti tyler]

S13 stock front shock housings? I don't need the spring


I'm almost 100% positive I scrapped my 2 sets of stock suspension a week before getting my last shell. And this shell has stock rears but old megan coilovers on the front. So I'd have to say I'll send you a PM here in a few minutes.


Let me throw some pants on and take the dog out back so I can take a look.

[TLoke13]

Have 2 full sets I believe. Not sure on stud condition I would change them either way. Good thing is, I throw in all new studs with each hub. I can put them in for you with my press for $6 extra or you can install them yourself.

Front hubs; $40 shipped priority
Rear hubs; $40 shipped priority.

If you buy the set; $63 shipped priority including all new studs.

Where in FL are you located? I also need a new windshield lol and door panels for my 91 Notch. Don't know if the hatch interiors match up or not. I'll probably take you up on the wheel hub deal though.

[anti tyler]

Where in FL are you located? I also need a new windshield lol and door panels for my 91 Notch. Don't know if the hatch interiors match up or not. I'll probably take you up on the wheel hub deal though.

Central fl. I've only got 1 extra windshield. it's on a shell I'm chopping up.

[TLoke13]

Central fl. I've only got 1 extra windshield. it's on a shell I'm chopping up.

I got a buddy headed to jville today, are you anywhere near there he could either meet you and grab them parts from you?

[TLoke13]

I need them wheel hubs asap!

[anti tyler]

Good question, I've always wished I did so I could sell it. But no, none of my cars have a chuki lip. I do however have a pignose bumper intact with turn signals! http://ehealthca.com/hu12uk1.jpg http://ehealthca.com/ipad/images/109.gif


Not sure if this is a question or what?

I need them wheel hubs asap!

PMed you on these, I meant to send a PM yesterday.

[TLoke13]

Not sure if this is a question or what?



PMed you on these, I meant to send a PM yesterday.

PM sent along with Paypal. Thank you.

[quickdiversion]

Do you have and would you be willing to ship the driver side power window motor and regulator?

[anti tyler]

PM sent along with Paypal. Thank you.

Got the payment thanks.

Do you have and would you be willing to ship the driver side power window motor and regulator?

Unfortunately my power doors were sold off of my bare shell. I currently have no power equipment at this time

[quickdiversion]

Thanks for updating me.

[anti tyler]

Thanks for updating me.

If there's anything at all you need in the future you let me know. Also feel free to shoot me a PM with your number, I'll be hitting 3 local junk yards on Wednesday and if there's a power s13 I can get in touch with you on the spot

[anti tyler]

List updated to reflect sold parts

Coupe body harness pending
FLCA with energy bushings and new ball joints sold
engine harness sold
Brake booster sold
Tcu sold
High cap diff cover sold
Stock diff internals sold (1) remaining
Stock diff cover sold
Stock 6 bolt half shafts sold (1) set remaining
Master cylinder sold
Clutch master sold

Plenty of oem parts left.

[Bleakley]

Do you have an S13 sr20det power steering tensioner bracket?
I need the one that attaches to the pump so you can use the tensioner.
Need one bad, so name a price..

[anti tyler]

I unfortunately have never owned any sr20 parts. wish I could help.

[Bleakley]

Gotchya man. No problem.
Free bump.

[anti tyler]

Bump,


Also selling an Isis oil cooler package I bought from enjuku a year ago. Currently installed on my KA-t. but I may have the filter adapter screw ins for other blocks.

$100. $99 off!

[illustrated_s13]

do you have the front carpet ? How Much?

[anti tyler]

I have the stock carpet still. It's inside of the coupe

[illustrated_s13]

How much do you want for itb

[anti tyler]

I mean Id sell it for like $55. It's more than likely going to cost upwards of $30 to ship because of size and weight.

[blasian]

How much for the air duct actuator servo?

[anti tyler]

I'll give you both servos for the price of one. just to get rid of it lol.

$20 flat. Priority mail shipping. Tomorrow

[Trueboost]

Hi,
don't know if you would happen to have the drivers side rack and pinion bracket and one of the bolts?

Thanks

[anti tyler]

How much for the air duct actuator servo?


Shipped! you should see it by Friday. Tracking sent via PM
Thanks

Hi,
don't know if you would happen to have the drivers side rack and pinion bracket and one of the bolts?

Thanks


Checking on this shortly. will get back to you via PM.





I'm off work today and tomorrow, if you need parts these are the days I'm open to pull and ship same day!

[2fastandfurious]

You still have 6 bolt axle? Pm

[anti tyler]

Monday bump, going to z32 brakes all the way around.

Will have Q45 front calipers & drilled/slotted 4&5 lug rotors available soon. Less than 6 months of use on rotors & ceramic lifetime Wagner pads.

[slamburger]

Do you have this? drivers side power window. just the pocket. Dont need the switches.


http://i1065.photobucket.com/albums/u386/slamburgerz/S13windowpart_zps46838330.jpg (http://s1065.photobucket.com/user/slamburgerz/media/S13windowpart_zps46838330.jpg.html)

[anti tyler]

Do you have this? drivers side power window. just the pocket. Dont need the switches.


http://i1065.photobucket.com/albums/u386/slamburgerz/S13windowpart_zps46838330.jpg (http://s1065.photobucket.com/user/slamburgerz/media/S13windowpart_zps46838330.jpg.html)


I know this won't help you but I had one 8 months ago and believe I tossed it. I'll check my shed when I get home in the morning and let you know.

Feel free to shoot me a PM as a reminder

[angel mkiv]

Hey you happen to have a s13 sr20 or ka24de transmission front cover plate? The part that the throw out bearing slides on? Also the throw out bearing sleeve?

[anti tyler]

Hey you happen to have a s13 sr20 or ka24de transmission front cover plate? The part that the throw out bearing slides on? Also the throw out bearing sleeve?

Sold all my tranny parts sorry, anything else just ask!

[CompleteXen]

Is the Exedy Clutch for a KA24? If so Ill pick it up! PM me.

[anti tyler]

Is the Exedy Clutch for a KA24? If so Ill pick it up! PM me.



Clutch is for a KA! lol

Bump have a bunch of z32 stuff now.

1 set of rear up rights
2 sets of e brake cables
E brake back plates hard ware etc!

[anti tyler]

Adding a pair of front z32 alum 30mm calipers and conversion lines to the list!

Also have an OEM RHD brake master cylinder for sale too.



Bump!

[anti tyler]

PARTS UPDATED! New list, brand new pictures. Everything updated.

[Darkcr3w]

Still have the open diff?

[signals13]

Do you still have the sway bar bushings? Do you happen to have rear knuckle bushings? How much shipped?

[anti tyler]

Still have the open diff?


I do still have one left (the one pictured in the trunk, unknown mileage, the chassis it came out of had 96xxx)


Do you still have the sway bar bushings? Do you happen to have rear knuckle bushings? How much shipped?

I have both front and rear sway bar bushing sets. The tears are still in the package but the fronts I only installed on the coupe shell. Never touched the road.

Rear control arm bushing set was sold on eBay yesterday.

[signals13]

Dang lol, ok how much for the sway bar bushings? Oh does that also include the sway bar end link bushings?

[anti tyler]

Dang lol, ok how much for the sway bar bushings? Oh does that also include the sway bar end link bushings?

The kit includes the rear end link bushings but I think I've got new front end links. I'd have to check on that tonight.

[signals13]

Ok let me know how much shipped.

[anti tyler]

Ok let me know how much shipped.

I'll shoot you a PM.


Just got some new z32 gear in, all for sale!

[anti tyler]

Just finished my pain staking z32 swap / new manifold install / braking 10 parts in the process.


Come get some spare z32 stuff & oem s13 stuff

[signals13]

Haven't got any pm's from you yet still interested in the bushings.

[JAStirrett]

Do you have the relays for the flip lights?

Also, are you selling the powersteering rack?

[anti tyler]

Do you have the relays for the flip lights?

Also, are you selling the powersteering rack?



Alright worked weeks straight I have a day off tomorrow, I'll be replying to everyone's requests and delayed requests.



I do have an assortment of relays and such. I have a spare rack available for sale. Price out the shipping. My zip is 34234

[landortey]

middle console wing and driver rear view mirror still available

[anti tyler]

middle console wing and driver rear view mirror still available

Center console and rear view mirror have been sold with the coupe shell. Thank you for reminding me to adjust the listing, sorry I do not have that available.

[anti tyler]

Z32 calipers sold, coupe sold. Some odds and ends left floating around.

[cbeuglas]

Is the energy suspension stuff sold?

[anti tyler]

Is the energy suspension stuff sold?



What energy bushings do you need?

[Darkcr3w]

Top and bottom carrier bearing mount shipped to 33774?

[ETHANOLED SR]

Passenger tail light inner plastic trim shipped to 90731

[TLoke13]

The Bulb Socket harness for the side markers front and rear available?

[Izanagi24]

Possible to buy door upper outer trim from S13 coupe ?

[anti tyler]

Top and bottom carrier bearing mount shipped to 33774?


$10 shipped zilvia special.

Passenger tail light inner plastic trim shipped to 90731

Heading home to check that right now, I'll message you.

Possible to buy door upper outer trim from S13 coupe ?

Is the coupe trim any different than the hatch? I've got 2 sets of hatch black upper trim, not coupe.

[anti tyler]

Passenger tail light inner plastic trim shipped to 90731

the last one I have isn't in the best shape, but if you really need it cover the $11.30 priority mail shipping and I'll wrap it good and it's yours. (I don't ship anything but priority insured mail)

http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/5ADCDE86-E244-492D-A724-A468210C135E.jpg

http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/E05FCB38-BA50-403D-B2E4-3BDB56EF5D0F.jpg

http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/D2793B9B-6BCC-4E72-A061-70E3D9FA9D00.jpg

http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/93FEDD6B-3396-4557-B4F7-074DF6D6D033.jpg

[Izanagi24]

$10 shipped zilvia special.



Heading home to check that right now, I'll message you.



Is the coupe trim any different than the hatch? I've got 2 sets of hatch black upper trim, not coupe.

Yes they are different. They are longer.

[signals13]

Any price on those bushings yet?

[anti tyler]

Yes they are different. They are longer.
Then no, I don't have a pair of coupe pieces. Just hatchback. Sorry


Any price on those bushings yet?

It doesn't have the front sway bar bushings though. Those did end up going with the coupe sale.

[Bushido]

i need an ac compressor bracket

[anti tyler]

i need an ac compressor bracket

I have that, anything else ac related? I have a full setup.

[anti tyler]

Just picked up another coupe. Still have a lot of parts available.

[streetracer8x]

How much for right fender shipped to 02919 thanks

[anti tyler]

How much for right fender shipped to 02919 thanks

Sorry I do not have any fenders available at the moment. both oem ones I have will be installed in place of the wide body fenders on my new coupe.

[Faded Red]

Do you have the OEM radio brackets? If so please hit me up!!

[emmanuelvm17]

Do you have a driver side tail light for a coupe in good condition?

[anti tyler]

Do you have the OEM radio brackets? If so please hit me up!!


That I do not, I'm currently installing them back into my coupe.





Do you have a driver side tail light for a coupe in good condition?


I'll have to look and see which side I have leftover.

[anti tyler]

Currently parting out a complete SOHC engine.


I also have a full felpro gasket set (SOHC)
Brand new front timing cover (SOHC)

Various other sensors and etc for SOHC have started to be installed ( Water temp, Coolant temp )

[anti tyler]

Sold some spare SOHC parts. Still have a complete running engine with PS all intact. 90% ac lines still in car also.

Pulling the emissions stuff tomorrow night after work.

[Behemoth]

How much for the rotors shipped to 94062?

[anti tyler]

How much for the rotors shipped to 94062?

Which rotors do you need. Fronts or rears.

[Behemoth]

@anti Tyler, how much for both? How much for front? Rear?


Sent from my iPhone using Tapatalk

[Heero88]

any chance that steering wheel hub is for sale and what price are you looking for it thanks also would you ship it ?

[anti tyler]

@anti Tyler, how much for both? How much for front? Rear?


Sent from my iPhone using Tapatalk

Thought I replied to this, I think I messaged you.

The only rotors I have left are fronts which I'll be using here very soon.

any chance that steering wheel hub is for sale and what price are you looking for it thanks also would you ship it ?


Which hub are you needing?




Plenty of stuff left.

Completely ka24e engine
SOHC harnesses
Flywheel
Trans dust plate
Clutch fork
Throw out bearing & mount
SOHC lower harness (works on dohc also)


http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/BCE8900E-793A-4EB0-BC62-66FE860B2EAD_1.jpg


http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/C4A62E2F-94B5-4115-B2A0-64AB30E5B8C2_1.jpg



http://i1135.photobucket.com/albums/m639/ascities/Coupe%20sale/0D8B0C3E-AF3F-4827-8A33-4D22173A0B19_2.jpg

[anti tyler]

Still lots of stuff left. Sohc engine and coupe have been sold

[anti tyler]

Also now selling a pair of rear z32 calipers. comes with a rebuild kit for both sides

[Asad_240]

Do you have both s13 seats?

[streetracer8x]

Also now selling a pair of rear z32 calipers. comes with a rebuild kit for both sides

How much for rear calipers

[anti tyler]

$120 shipped including both sets of rebuild kits

[anti tyler]

Still a ton of stuff OEM left available. Let me know what you need even if it's not listed!

[Smokey_Paz]

Hey i need the engine bay harness .the one with fuse boxes .not the motor harness.what year is the car ?and still have the log mami?

[maker_moan]

hey bro still got the outer door trim, and do you have the driver side outer window trim?

[ka-titties]

hey dude, if you're willing, I'm interested in the little coin pocket that's on the gauge cluster surround you've got listed. Would you be willing to part just that piece from the cluster surround assembly?

thanks

[anti tyler]

Hey i need the engine bay harness .the one with fuse boxes .not the motor harness.what year is the car ?and still have the log mami?

Yes I have an engine bay harness still, it's from a 93'.

No log manifold left, scrapped them.

hey bro still got the outer door trim, and do you have the driver side outer window trim?

Which side door trim, I've got 2 spare doors if you're talking the trim that's on them. I doo have both sides of the window trim.

hey dude, if you're willing, I'm interested in the little coin pocket that's on the gauge cluster surround you've got listed. Would you be willing to part just that piece from the cluster surround assembly?

thanks


That I actually don't have anymore, sorry.

[anti tyler]

Added a few new things, got a godspeed crossbar for sale as well.

[anti tyler]

Bump!!!!!!!!!!!

[S13alldayyo]

Do you have a condenser fan?


Sent from my iPhone using Tapatalk

[anti tyler]

Do you have a condenser fan?


Sent from my iPhone using Tapatalk


I have electric fans, however I do not have an OEM condensor fan.

Give me the year of the 240 and I'll see if I can get you one.

[S13alldayyo]

93


Sent from my iPhone using Tapatalk

[ashero2]

do you have the ecu bracket?

[anti tyler]

Listing updated. Still forgetting a few parts that are outside and in the car at the moment.


Will entertain all offers. Thanks

[Mofuhcka]

How much for the Godspeed assembly? Do you have manual door panels? And where in FL are you lol

[anti tyler]

I have a pair of manual doors, but no panels on them.


Paid $266 for the crossbar, I'd take $200 even. If you're in Jacksonville I'd meet you half way on a day I go to Disney. (I'm in St. Pete)

Or I can also ship it

[Mofuhcka]

Right on I'll see when my wife has time to go back, still have tickets haha

[anti tyler]

Right on I'll see when my wife has time to go back, still have tickets haha

Yeah just let me know, I can ship it as well. Won't cost as much for florida

[Mofuhcka]

Yeah just let me know, I can ship it as well. Won't cost as much for florida

PM me a shipping quote!

[anti tyler]

Alright so shipping would be about $30-40 so I can do $200 shipped.

[Mofuhcka]

Damn right on man, PM me your paypal

[anti tyler]

Damn right on man, PM me your paypal


Sent.


Some parts sold & removed.


Still plenty of stuff to go around.

[anti tyler]

Bump, two transmissions sold. One left

[anti tyler]

3 In a row bump. Surely the oem parts trade hasn't died off this bad.

[b.series]

do you have any hood hinges left? PM me please.

[anti tyler]

Still have some parts. Getting ready to offer my full ka-t hatch up for part out in prep for building a new s13.

[mando240]

I need the intake pip and if you happen to have an uncut s13 wire harness

[anti tyler]

I need the intake pip and if you happen to have an uncut s13 wire harness


Which intake pipe, the new cold air kit?

I only have a chopped up harness left that i've been using for parts and pieces.

[mando240]

Yes the new un named pipe

[anti tyler]

Parts list updated, sparing parts that are taking up corner space in storage.

[DriveUinsane240]

Do u have heater core and pop up headlight switch available? Also where are u located?

Sent from my SAMSUNG-SM-N920A using Tapatalk

[anti tyler]

Do u have heater core and pop up headlight switch available? Also where are u located?

Sent from my SAMSUNG-SM-N920A using Tapatalk


I do still have a heater core available to ship priority flat rate, however I had to throw away the last push button switch for the pop ups.

All parts are located in central florida.

[anti tyler]

Come get a piece of Nissan history before it's too late.

Couple parts sold!

[ccarmaster]

Is the driver window regulator still available?

Sent from my SM-G935V using Tapatalk

[anti tyler]

Is the driver window regulator still available?

Sent from my SM-G935V using Tapatalk

Messaged you ages ago saying yes. It still is.

I have a new home and a garage now all parts are inside and available for pictures instantly.

[blo0d]

have a s13 cluster for sale?

[Mintvert]

Do you have the pigtails for the m/t starter relay and any idea if the s13 cruise module is good?

[markeith.thompso]

Is the interior wiring harness still there


Sent from my iPhone using Tapatalk

[Lpn26]

How much for the headers shipped to 90062

[Po_31]

Do you still have the 300zx brake parts

[H3lt3rsk3lt3r]

Longshot, but Im in the market for a few things.
Hoodhinges
Driver side power window switch and/or a full driver side panel with all the goods.
Thanks in advance!

[anti tyler]

have a s13 cluster for sale?

No sorry last one went out December.

Do you have the pigtails for the m/t starter relay and any idea if the s13 cruise module is good?


I'll check my harness after I post this, I think it's an automatic honestly.

& the cruise module came off the car working 10 months after its last start so I can't promise anything, but I can promise it's been inside since removal and was under hood its entire life. Not directly exposed to elements.


Is the interior wiring harness still there


Sent from my iPhone using Tapatalk

I don't have an interior harness currently.

How much for the headers shipped to 90062

I'll check on that now, they're an odd shape I'm wondering if I can just leave them unwrapped and "tag" a shipping label on them, if you don't might some shipping scratches?


Do you still have the 300zx brake parts

I have a pair of the rear parking shoes, but no front or rear pads currently.

Longshot, but Im in the market for a few things.
Hoodhinges
Driver side power window switch and/or a full driver side panel with all the goods.
Thanks in advance!


Out of 17 only one I owned was power, it's long gone unfortunately.

I do have hinges for bottom dollar, shoot me a Pm, mostly just pay shipping for those

[panmanstan]

Side marker bulb socket for front fenders to 28411??

[anti tyler]

Side marker bulb socket for front fenders to 28411??

Sorry about that I'll get back to you in a few hours I have to check and see which ones I have left.

[anti tyler]

more stuff sold, throwing things away weekly. get it while you can.

[Kirbyz]

If it's a ka24et that you might part out lmk. Trying to turbo my ka24e, and need parts.

[anti tyler]

If it's a ka24et that you might part out lmk. Trying to turbo my ka24e, and need parts.


It's quite possible, let me know exactly what you're looking for and I'll check into it.


I've got enough people messaging me about a part out, that it would be do-able.

[ocelotmother]

Hey, I am looking for the connecting arms that connect the headlight motor and headlight. Do you happen to have those? Thanks!

[anti tyler]

Hey, I am looking for the connecting arms that connect the headlight motor and headlight. Do you happen to have those? Thanks!


I don't currently have a spare set, people typically break them because they don't know how to properly remove them or they become brittle.

[anti tyler]

Dust plate and vacuum block sold,

Side marker sockets in discussion.

[ocelotmother]

I don't currently have a spare set, people typically break them because they don't know how to properly remove them or they become brittle.
Ah, I see. Thank you for your reply mate!

[anti tyler]

PS pump and stock KA block sold! keep it coming, there's plenty of random stuff left.

[xSwrv]

Price on front and rear sway bars ?

[cycloneskate]

I need the rear window washer sprayer nozzle for an s13 hatch. Ya got one of those?

[anti tyler]

Price on front and rear sway bars ?

What's your zip, PM or reply here with it so I can get shipping.

I need the rear window washer sprayer nozzle for an s13 hatch. Ya got one of those?



Unfortunately not, haven't had the pleasure of owning a rear wiper hatch yet.

[anti tyler]

It's Sunday, browse the garage sale, get some stuff lined up today and it ships tomorrow!

[Sr24]

Inboxed you sir.

[85efi]

By any chance, do you have the speed sensor off the transmission for sale...

[nisileighty]

Price on cluster?


Sent from my iPhone using Tapatalk

[autismojoe]

I am looking for some fuel accessories. Happen to have a fuel pump hanger assembly lying around? I will buy it today! LET ME KNOW!

[anti tyler]

Price on cluster?


Sent from my iPhone using Tapatalk

Strike 3, no cluster currently available, sorry!

I am looking for some fuel accessories. Happen to have a fuel pump hanger assembly lying around? I will buy it today! LET ME KNOW!

I had to trash it, it was neglected and left in a tank for too long.

By any chance, do you have the speed sensor off the transmission for sale...

Unfortunately no, sold the last one last week.

[Agent S14]

are you parting the turbo setup? if so what are the specs??

[wmblnknshp]

Price on steering column and rack if you have them. Shipped to 62294.


Sent from my iPhone using Tapatalk

[Lpn26]

Need the E.F.I plug. Did u get a quote for the headers shipped to 90062. Don't mind if there scratched on the way here

[anti tyler]

are you parting the turbo setup? if so what are the specs??

What exactly are you looking for specs on;


Price on steering column and rack if you have them. Shipped to 62294.


Sent from my iPhone using Tapatalk

I should have a column in my garage, no rack though sorry. (Column does have steering shaft though)

Need the E.F.I plug. Did u get a quote for the headers shipped to 90062. Don't mind if there scratched on the way here


The headers I'll measure when I get off work in about 6 hours, you just need the injector plugs snipped from the harness?

[Lpn26]

Ok and I need the main plug that comes off the intake mifold harness

[xSwrv]

Is the full turbo assembly still available ?

[anti tyler]

Ok and I need the main plug that comes off the intake mifold harness

I'd just give the whole intake manifold harness, it's easier that way.

Shipping on the headers isn't cheap, $61.56 after taxes.

Is the full turbo assembly still available ?

It is but I'm hesitant to sell the turbo itself, what all exactly are you looking for