240 GTR
06-23-2014, 09:26 AM
HKS / Full-Race / Tial SR20DET Turbo Kit - $1400 shipped.
Setup supported 430 whp / 380 wtq at 21 psi.
Turbo is an HKS 3037s, T2 frame, .73 a/r exhaust housing. It's in great shape, with negligible lateral shaft play and no axial play. Intake and exhaust wheels are not nicked or bent in any way. No oil or water seal leaks. Comes with stainless braided oil feed and water lines (set up to use stock s13 t25 water line fitting behind the head). Turbine housing is sealed with a thin layer of copper RTV and tacked to manifold.
Exhaust manifold is an old school Full-Race bottom mount T2 flange with v-band external waste gate. The waste gate elbow broke off at a drift event, but has been TIG welded back in place with no issues. No other leaks or cracks.
Wastegate is a Tial 40mm. i think it has a 14 psi spring, but I always used a boost controller so I'm honestly not 100% sure. Works as it should and includes a stainless dump tube. Also included is an old rusty turbine elbow that came as a part of this setup. Works fine, but doesn't look the greatest. 4-bolt outlet flange.
https://post.craigslist.org/imagepreview/00f0f_1U8RQFTc2U4_600x450.jpg
https://post.craigslist.org/imagepreview/00Q0Q_fjmlp0S6Jb2_600x450.jpg
https://post.craigslist.org/imagepreview/00G0G_glr79I0hRH0_600x450.jpg
https://post.craigslist.org/imagepreview/00404_4mZTyothJi7_600x450.jpg
https://post.craigslist.org/imagepreview/00A0A_hcNh8mh6Rx3_600x450.jpg
Setup supported 430 whp / 380 wtq at 21 psi.
Turbo is an HKS 3037s, T2 frame, .73 a/r exhaust housing. It's in great shape, with negligible lateral shaft play and no axial play. Intake and exhaust wheels are not nicked or bent in any way. No oil or water seal leaks. Comes with stainless braided oil feed and water lines (set up to use stock s13 t25 water line fitting behind the head). Turbine housing is sealed with a thin layer of copper RTV and tacked to manifold.
Exhaust manifold is an old school Full-Race bottom mount T2 flange with v-band external waste gate. The waste gate elbow broke off at a drift event, but has been TIG welded back in place with no issues. No other leaks or cracks.
Wastegate is a Tial 40mm. i think it has a 14 psi spring, but I always used a boost controller so I'm honestly not 100% sure. Works as it should and includes a stainless dump tube. Also included is an old rusty turbine elbow that came as a part of this setup. Works fine, but doesn't look the greatest. 4-bolt outlet flange.
https://post.craigslist.org/imagepreview/00f0f_1U8RQFTc2U4_600x450.jpg
https://post.craigslist.org/imagepreview/00Q0Q_fjmlp0S6Jb2_600x450.jpg
https://post.craigslist.org/imagepreview/00G0G_glr79I0hRH0_600x450.jpg
https://post.craigslist.org/imagepreview/00404_4mZTyothJi7_600x450.jpg
https://post.craigslist.org/imagepreview/00A0A_hcNh8mh6Rx3_600x450.jpg