Boosty - Street build LS# s13 coupe 5.7L

[boost infested]

Power/current specs:
HP 384
TQ 370
Dyno Dynamics 450 DS


Engine:
- 5.7L LS1
- Fast 102mm intake
- Fast 102mm big mouth throttle body
- Holley EFI LS fuel rails
- 243 z06 heads with sodium filled valves
- 650" dual valve spring kit
- LS7 lifters
- Comp Cams trunnion upgrade kit
- Comp Cams 7.3" 5/16 push rods
- Comp Cams XFI XR277HR cam
- Forged Mahle pistons
- stock rods

Engine Dress up:
Holley LS valve covers
Chasebays - relocation brake lines
Plasti dipped intake
MSD wires

Suspension and handling:
s15 5 lug conversion
Stance GR+Pro LS swapped specific
Sikky front swaybar 32mm tubular
Tanabe rear swaybar 27.5mm

Wheels and tires:
Work VS-KF burning black
front: 18x9.5 +7mm (107mm Lip) 225/45
(needed 4mm spacers to clear the z32 caliper)
rear: 18x11 +20mm (120mm Lip) 265/35
(needed to bash rear inner tub, 8mm spacer to clear the inner wall)
Braking System:
front: s15 4 pistons
rear: stock

Exterior
s13 silvia front conversion
s13 silvia aero front bumper
s13 Chargespeed silvia aero front lip
s13 chuki 180sx side skirts
s13 Bomex Bonneville rear valance
s13 Dmax roof spoiler
s13 Circuit Sports taillights

https://farm3.staticflickr.com/2921/14463756541_aaab8340a7_b.jpg (https://flic.kr/p/o37wUM)[/url] (https://flic.kr/p/o37wUM)
https://farm4.staticflickr.com/3738/14315769645_a765227ec5_b.jpg (https://flic.kr/p/nP34yz) (https://flic.kr/p/nP34yz)

Love these s15 seats
https://farm3.staticflickr.com/2906/14487267683_82e45104da_b.jpg (https://flic.kr/p/o5c2Xi) (https://flic.kr/p/o5c2Xi)

https://farm6.staticflickr.com/5593/14465780442_c2f0ae2b56_b.jpg (https://flic.kr/p/o3hUxC) (https://flic.kr/p/o3hUxC)
https://farm6.staticflickr.com/5578/14487269753_c53006a3b9_b.jpg (https://flic.kr/p/o5c3yZ) (https://flic.kr/p/o5c3yZ)


Rusty frame rails repair.
https://farm4.staticflickr.com/3921/14444044746_70911804d7_b.jpg (https://flic.kr/p/o1nvhf) (https://flic.kr/p/o1nvhf)
https://farm6.staticflickr.com/5583/14465807732_bb85191e63_b.jpg (https://flic.kr/p/o3i3E9) (https://flic.kr/p/o3i3E9)

New metal!
https://farm6.staticflickr.com/5504/14463789201_e7fd3b6e6f_b.jpg (https://flic.kr/p/o37GBT)
(https://flic.kr/p/o37GBT)
https://farm3.staticflickr.com/2906/14280562148_b5c5cc28eb_b.jpg (https://flic.kr/p/nKVBAL) (https://flic.kr/p/nKVBAL)
https://farm4.staticflickr.com/3838/14463790201_7115d24dd3_b.jpg (https://flic.kr/p/o37GV8) (https://flic.kr/p/o37GV8)

Por15
https://farm6.staticflickr.com/5535/14444049546_0bb6924403_b.jpg (https://flic.kr/p/o1nwH1) (https://flic.kr/p/o1nwH1)

On some ugly ass MRR 19x8 and 19x9
https://farm4.staticflickr.com/3883/14465785782_9381c172af_b.jpg (https://flic.kr/p/o3hW8G) (https://flic.kr/p/o3hW8G)

Temporary fix... Varrstoens. 18x9.5 18x10.5
https://farm3.staticflickr.com/2833/10697843636_6b41ee2c44_b.jpg (https://flic.kr/p/hikfcW) (https://flic.kr/p/hikfcW)
https://farm6.staticflickr.com/5515/10697844766_4d2b40bbe4_b.jpg (https://flic.kr/p/hikfxq) (https://flic.kr/p/hikfxq)

Onto a face lift. Good bye number5 and hello silvia
https://farm6.staticflickr.com/5542/14280734068_6e84b1eb3e_b.jpg (https://flic.kr/p/nKWuGU) (https://flic.kr/p/nKWuGU)
https://farm4.staticflickr.com/3835/14487468513_78d4ffe838_b.jpg (https://flic.kr/p/o5d4DT) (https://flic.kr/p/o5d4DT)
https://farm4.staticflickr.com/3903/14280868657_cb05682157_b.jpg (https://flic.kr/p/nKXbHp) (https://flic.kr/p/nKXbHp)

Ugh.. don't like the fitment of these Origin fenders..
https://farm4.staticflickr.com/3862/14466167324_8c3ed2d32b_b.jpg (https://flic.kr/p/o3jTy1) (https://flic.kr/p/o3jTy1)

added Bomex Bonneville rear.... It's RARE!
https://farm6.staticflickr.com/5562/14280699729_2e5679640e_b.jpg (https://flic.kr/p/nKWjuR) (https://flic.kr/p/nKWjuR)
https://farm6.staticflickr.com/5567/14465988172_c2f5d8aa25_b.jpg (https://flic.kr/p/o3iYib) (https://flic.kr/p/o3iYib)

I got a free jdm aero bumper for free but it was cracked and warped but I got it fixed! Like brand new again!
https://farm6.staticflickr.com/5530/10697782756_6225f3aa94_b.jpg (https://flic.kr/p/hijW7h) (https://flic.kr/p/hijW7h)
https://farm4.staticflickr.com/3748/10697713415_c4af0a038a_b.jpg (https://flic.kr/p/hijzuK) (https://flic.kr/p/hijzuK)

Back with the oem metal fenders
https://farm6.staticflickr.com/5564/14280701239_e6665ffe0f_b.jpg (https://flic.kr/p/nKWjWT) (https://flic.kr/p/nKWjWT)

Very last order of these VSKF from Ravspec
https://farm4.staticflickr.com/3839/14280882827_96df4eea48_b.jpg (https://flic.kr/p/nKXfVH) (https://flic.kr/p/nKXfVH)

So lucky to buy these brand new
https://farm4.staticflickr.com/3839/14280752748_4a3fb43e08_b.jpg (https://flic.kr/p/nKWAfY) (https://flic.kr/p/nKWAfY)
https://farm4.staticflickr.com/3918/14280786889_32b04c5abd_b.jpg (https://flic.kr/p/nKWLpB) (https://flic.kr/p/nKWLpB)
https://farm6.staticflickr.com/5578/14280837218_6e0293a2aa_b.jpg (https://flic.kr/p/nKX2nm) (https://flic.kr/p/nKX2nm)
https://farm4.staticflickr.com/3797/10697742476_8e400663e9_b.jpg (https://flic.kr/p/hijJ8N) (https://flic.kr/p/hijJ8N)

18x11 +20(12)265/35 needed inner tub bashing and a 8mm spacer
https://farm4.staticflickr.com/3867/14444344896_eb80bc15d6_b.jpg (https://flic.kr/p/o1p3vf) (https://flic.kr/p/o1p3vf)
https://farm6.staticflickr.com/5478/14280815129_4f5b84e3a8_b.jpg (https://flic.kr/p/nKWUNv) (https://flic.kr/p/nKWUNv)

18x9.5 +7 225/40 (needed a 4mm spacers to clear the z32 caliper)
18x11 +20(12) 265/35
https://farm4.staticflickr.com/3880/14466119892_96953351a4_b.jpg (https://flic.kr/p/o3jDsd) (https://flic.kr/p/o3jDsd)
https://farm6.staticflickr.com/5485/14464100541_71f30416ff_b.jpg (https://flic.kr/p/o39iaP) (https://flic.kr/p/o39iaP)

Found a aero lip for sale.. not sure the brand.. Vanquish? Looks like the old school Chargespeed aero lip rep.
https://farm3.staticflickr.com/2897/14487605153_8b71fe40c9_b.jpg (https://flic.kr/p/o5dLgK) (https://flic.kr/p/o5dLgK)
https://farm3.staticflickr.com/2830/10697736704_b246b64c72_b.jpg (https://flic.kr/p/hijGqh) (https://flic.kr/p/hijGqh)

It's getting hard to find oem parts. Found this from a zilvia member in Thailand.
https://farm3.staticflickr.com/2883/10697769824_b690e62bcf_b.jpg (https://flic.kr/p/hijSgj) (https://flic.kr/p/hijSgj)

https://farm4.staticflickr.com/3832/10697136415_b805c83991_b.jpg (https://flic.kr/p/higBYt) (https://flic.kr/p/higBYt)
https://farm6.staticflickr.com/5528/10697145825_1370bb0bf5_b.jpg (https://flic.kr/p/higELH) (https://flic.kr/p/higELH)
https://farm3.staticflickr.com/2871/10697210096_f911c63ba5_b.jpg (https://flic.kr/p/higZSQ) (https://flic.kr/p/higZSQ)
https://farm8.staticflickr.com/7419/10697190904_1c35d3ff24_b.jpg (https://flic.kr/p/higUaW) (https://flic.kr/p/higUaW)

An impulse buy... should have gone with a crate engine instead... :picardfp:
https://farm4.staticflickr.com/3892/14487828463_953e9dfdbe_o.jpg (https://flic.kr/p/o5eUDV) (https://flic.kr/p/o5eUDV)

She's going under the knife.
https://farm3.staticflickr.com/2919/14281174657_18f71649f9_b.jpg (https://flic.kr/p/nKYKFg) (https://flic.kr/p/nKYKFg)

https://farm4.staticflickr.com/3893/14281174977_b0985f57a2_b.jpg (https://flic.kr/p/nKYKLM) (https://flic.kr/p/nKYKLM)

What a mess..
https://farm4.staticflickr.com/3915/14466341262_717b861d4c_b.jpg (https://flic.kr/p/o3kMfW) (https://flic.kr/p/o3kMfW)

https://farm4.staticflickr.com/3868/14281176267_c00c752dbf_b.jpg (https://flic.kr/p/nKYLa2) (https://flic.kr/p/nKYLa2)
https://farm6.staticflickr.com/5526/14466285212_ae290d6893_b.jpg (https://flic.kr/p/o3kuAy) (https://flic.kr/p/o3kuAy)
https://farm6.staticflickr.com/5194/14281041018_564e3111f6_b.jpg (https://flic.kr/p/nKY4X9) (https://flic.kr/p/nKY4X9)

Can't decide on cutting the factory tubs out or not. [email protected] it go big.. more work.
https://farm6.staticflickr.com/5313/14281040088_c1bd62319b_b.jpg (https://flic.kr/p/nKY4F7) (https://flic.kr/p/nKY4F7)
https://farm6.staticflickr.com/5512/14487827283_f415bb1874_b.jpg (https://flic.kr/p/o5eUiz) (https://flic.kr/p/o5eUiz)
https://farm4.staticflickr.com/3852/14281233427_87cd10e572_b.jpg (https://flic.kr/p/nKZ49x)[url=https://www.flickr.com/people//] (https://flic.kr/p/nKZ49x)

[boost infested]

Don't judge too hard first time doing this lol. I don't have a plasma cutter everything was cut by a die grinder. This is also my first time doing this sort of work.
https://farm6.staticflickr.com/5507/14464704521_215b35c668_b.jpg (https://flic.kr/p/o3coHg)[/url] (https://flic.kr/p/o3coHg)
https://farm3.staticflickr.com/2916/14466908554_d36f242c41_b.jpg (https://flic.kr/p/o3oFTQ) (https://flic.kr/p/o3oFTQ)
https://farm3.staticflickr.com/2911/14488211833_6ea7c651a6_b.jpg (https://flic.kr/p/o5gSBK) (https://flic.kr/p/o5gSBK)

https://farm4.staticflickr.com/3858/14466733142_d313edfd8f_b.jpg (https://flic.kr/p/o3nMKu) (https://flic.kr/p/o3nMKu)
https://farm3.staticflickr.com/2904/14281478259_9b92d2d039_b.jpg (https://flic.kr/p/nL1iVM) (https://flic.kr/p/nL1iVM)
https://farm4.staticflickr.com/3886/14466949994_b01a307a42_b.jpg (https://flic.kr/p/o3oUdj) (https://flic.kr/p/o3oUdj)
https://farm4.staticflickr.com/3908/14466950234_ffa1f3c533_b.jpg (https://flic.kr/p/o3oUhs) (https://flic.kr/p/o3oUhs)
https://farm6.staticflickr.com/5158/14466774202_e8d07d053a_b.jpg (https://flic.kr/p/o3nZXq) (https://flic.kr/p/o3nZXq)


https://farm4.staticflickr.com/3853/14281664857_cd5007e643_b.jpg (https://flic.kr/p/nL2goZ)
(https://flic.kr/p/nL2goZ)

https://farm4.staticflickr.com/3908/14283160257_7539471a18_b.jpg (https://flic.kr/p/nL9VVK) (https://flic.kr/p/nL9VVK)

https://farm6.staticflickr.com/5558/14466253021_52d357f98f_b.jpg (https://flic.kr/p/o3kk2x) (https://flic.kr/p/o3kk2x)

https://farm3.staticflickr.com/2913/14489757613_99d2d2bab1_b.jpg (https://flic.kr/p/o5pN88) (https://flic.kr/p/o5pN88)

Ok, I am so sick of grinding. I cheated with seal sealer over welded area.
https://farm6.staticflickr.com/5158/14469606645_e85f9b7e47_b.jpg (https://flic.kr/p/o3CvWD) (https://flic.kr/p/o3CvWD)

https://farm6.staticflickr.com/5567/14468287422_5eed65693f_b.jpg (https://flic.kr/p/o3vKMq) (https://flic.kr/p/o3vKMq)

https://farm6.staticflickr.com/5523/14282992710_cbf4d55f98_b.jpg (https://flic.kr/p/nL9581) (https://flic.kr/p/nL9581)

https://farm6.staticflickr.com/5278/14283161667_4fc29e152c_b.jpg (https://flic.kr/p/nL9Wm4) (https://flic.kr/p/nL9Wm4)

https://farm4.staticflickr.com/3914/14466253941_4a243f2e70_b.jpg (https://flic.kr/p/o3kkip) (https://flic.kr/p/o3kkip)


BNR34 white QM1
https://farm4.staticflickr.com/3913/14514467623_16125c3777_b.jpg (https://flic.kr/p/o7ArxM) (https://flic.kr/p/o7ArxM)

https://farm3.staticflickr.com/2897/14490973561_5fe3d05557_b.jpg (https://flic.kr/p/o5w2zK) (https://flic.kr/p/o5w2zK)

https://farm4.staticflickr.com/3856/14494359355_857a0f13f8_b.jpg (https://flic.kr/p/o5Po4v) (https://flic.kr/p/o5Po4v)

https://farm4.staticflickr.com/3924/14490973331_6df7557644_b.jpg (https://flic.kr/p/o5w2vM)[url=https://www.flickr.com/people//] (https://flic.kr/p/o5w2vM)

[boost infested]

Mahle forged pistons with Comp cams XFI XR277HR cam 54-418-11
https://farm4.staticflickr.com/3892/14308194367_56655fdc0d_b.jpg (https://flic.kr/p/nNneGk)[/url] (https://flic.kr/p/nNneGk)

low mileage 243 heads from a LS6(z06) with sodium filled valves. Manley Valve dual spring kit with titanium collars .650" lift max.
https://farm6.staticflickr.com/5476/14514753903_a4ab650002_b.jpg (https://flic.kr/p/o7BUDD) (https://flic.kr/p/o7BUDD) (https://www.flickr.com/people//)
https://farm6.staticflickr.com/5502/14493436612_ee2072e3d0_b.jpg (https://flic.kr/p/o5JDL9) (https://flic.kr/p/o5JDL9)
https://farm3.staticflickr.com/2904/14491260371_62531ce201_b.jpg (https://flic.kr/p/o5xuQK) (https://flic.kr/p/o5xuQK)

a quick test fit..
https://farm6.staticflickr.com/5579/14493457494_248a887035_b.jpg (https://flic.kr/p/o5JKYb) (https://flic.kr/p/o5JKYb)
https://farm3.staticflickr.com/2937/14308064718_703bdcda3f_b.jpg (https://flic.kr/p/nNmza1) (https://flic.kr/p/nNmza1)



Sikky LS swap parts bought with Wiring Specialties.

https://farm6.staticflickr.com/5487/11111219885_4b57bbc692_b.jpg (https://flic.kr/p/hVRUyD) (https://flic.kr/p/hVRUyD)

https://farm4.staticflickr.com/3696/11111214805_fd8138079e_b.jpg (https://flic.kr/p/hVRT44) (https://flic.kr/p/hVRT44)

https://farm4.staticflickr.com/3818/11111275374_267415f8d4_b.jpg (https://flic.kr/p/hVSc4m) (https://flic.kr/p/hVSc4m)

https://farm4.staticflickr.com/3816/11111271736_6e4f8056bc_b.jpg (https://flic.kr/p/hVSaYC) (https://flic.kr/p/hVSaYC)

https://farm8.staticflickr.com/7441/11111211625_eb223d0d1d_b.jpg (https://flic.kr/p/hVRS7e) (https://flic.kr/p/hVRS7e)

https://farm4.staticflickr.com/3820/11111402093_1f018b8cd6_b.jpg (https://flic.kr/p/hVSQJa) (https://flic.kr/p/hVSQJa)

https://farm6.staticflickr.com/5501/11111273784_c8501f0bea_b.jpg (https://flic.kr/p/hVSbzW) (https://flic.kr/p/hVSbzW)


My stock intake came broken. So I replaced with the FAST 102 intake and throttle body.
https://farm4.staticflickr.com/3819/11111268626_041515569e_b.jpg (https://flic.kr/p/hVSa41) (https://flic.kr/p/hVSa41)

https://farm8.staticflickr.com/7460/11111267446_07cbce52ac_b.jpg (https://flic.kr/p/hVS9GE) (https://flic.kr/p/hVS9GE)

ChaseBays z32 brake master hide away brake lines.
https://farm6.staticflickr.com/5564/14493090484_4fd61144f3_b.jpg (https://flic.kr/p/o5GSSq) (https://flic.kr/p/o5GSSq)

Tremec Magnum 6spd. The length from the bell housing to the shifter is 26.6" vs oem t56 is 29.5" The difference of 2.9". The oem t56 is already about 1.5" away from the center of the s13 shifter hole. To fix this you must use Sikky's 350z LS swap magnum shifter. Version 2 is ready to roll (June 22nd). You also have to get a Spicer slip yoke(1330 Series 31 spline) and YOU HAVE TO SHORTEN THE SIKKY DRIVE SHAFT.
https://farm6.staticflickr.com/5499/14307924747_c120faabdd_b.jpg (https://flic.kr/p/nNkRxH) (https://flic.kr/p/nNkRxH) (https://www.flickr.com/people//)

http://www.ls1tech.com/forums/attachments/manual-transmission/216104d1266377700-cts-t56-behinde-ls2-first-gen-bird-tremac_dims-968x638.jpg

A quick test fit with just the bell housing bolted up to the long block.
https://farm6.staticflickr.com/5278/14307922007_5131b3db16_b.jpg (https://flic.kr/p/nNkQJt) (https://flic.kr/p/nNkQJt)
https://farm6.staticflickr.com/5570/14307793118_e339a63d11_b.jpg (https://www.flickr.com/people//) [url=https://www.flickr.com/people//] (https://flic.kr/p/nNkbqf)

Monster Clutch Level 3 700 HP/TQ with light weight billet 18lbs flywheel.
https://farm4.staticflickr.com/3858/14307926717_6f73262835_b.jpg (https://flic.kr/p/nNkS8F) (https://flic.kr/p/nNkS8F) (https://www.flickr.com/people//)
https://farm6.staticflickr.com/5595/14307744760_6cca8b9cec_b.jpg (https://flic.kr/p/nNjW3u) (https://flic.kr/p/nNjW3u) (https://www.flickr.com/people//)

[boost infested]

Engine and trans bolted together and back into the engine bay.

1 7/8 headers install problem..

driver side: top view and bottom view
https://farm4.staticflickr.com/3904/14394816304_b18b6152ca_c.jpg (https://flic.kr/p/nW2co1)[/url] (https://flic.kr/p/nW2co1)https://farm6.staticflickr.com/5522/14432174492_62978431b0_c.jpg (https://flic.kr/p/nZjEEG) (https://flic.kr/p/nZjEEG)

passenger side last runner is touching the frame rail: top view and bottom view
https://farm3.staticflickr.com/2939/14209274518_8ae0df0f80_c.jpg (https://flic.kr/p/nDCfgG) (https://flic.kr/p/nDCfgG)https://farm4.staticflickr.com/3862/14247049327_8666766060_c.jpg (https://flic.kr/p/nGXRpv) (https://flic.kr/p/nGXRpv)

https://farm3.staticflickr.com/2905/14493522344_7576ae1d68_b.jpg (https://flic.kr/p/o5K6fh)[url=https://www.flickr.com/people//] (https://flic.kr/p/o5K6fh)

[speeddream]

Sick build

[smokescreen240]

I can't say i like where this is going......because I LOVE it. clean! looking forward to seeing this finished.

[2muchboost]

Geez buddy you are not F-ing around. Amazing build for sure. I look forward to what comes of this build especially with your attention to detail. Subed!

[turbo2nr]

NIce choices in parts, cant wait to see it completed!

[d_nice]

damn bro looking crazy

[1Day]

Not sure about the S13's but watch your hood clearance with the 102. My dmax hood sits right on top of the intake.

[bc.]

damn, already to the end :(

[tricky_ab]

Very nice build that you've got so far. I'm diggin' the quality parts :)

[bova17]

Very clean and well done.

[boost infested]

I added DEI fire sleeve to the brake lines. Body harness is 95% re-wrapped. Not sure where I am going to put the oil filter remote mount yet.

Waiting on
- Sikky Magnum shifter
- Sikky RH header
- shortening the driveshaft.
- battery relocation to the trunk
- brackets for the radiator fans

:picardfp: :drama:

https://farm4.staticflickr.com/3897/14506714271_94229133da_b.jpg (https://flic.kr/p/o6UGKi) (https://flic.kr/p/o6UGKi) [/url] https://farm6.staticflickr.com/5237/14323506939_c94e2df0ca_b.jpg (https://www.flickr.com/people//) (https://flic.kr/p/nPHHAc) (https://www.flickr.com/people//)

https://farm4.staticflickr.com/3915/14487011706_130eb2ef43_b.jpg (https://flic.kr/p/o5aHRU)[url=https://www.flickr.com/people//] (https://flic.kr/p/o5aHRU)

[2muchboost]

Literally sitting here in my office drinking tea just envisioning this project once completed. I wish I had half the fabrication skills and 1/5 the attention to detail.

[KoukiMonsta]

Literally sitting here in my office drinking tea just envisioning this project once completed. I wish I had half the fabrication skills and 1/5 the attention to detail.

personally im having a coffee

but i like what i see!

[Mschiano.]

In for more! Lookin super clean

[boost infested]

Thanks guys, I can't wait to fire it up.

[niscur29]

http://cdn.memegenerator.net/instances/500x/43625927.jpg

[boost infested]

#noclub #anticlub

[Royal_T]

Man build is looking good.. Keep it up

[boost infested]

https://farm4.staticflickr.com/3888/15068506845_617717465f_b.jpg (https://flic.kr/p/oXy37a)[/url] (https://flic.kr/p/oXy37a)



First start :2f2f:
[url]https://flic.kr/p/oNwhnu

[killer240]

I can't wait to hear this ROAR!

[S14outlaw]

Awesome build thus far! Love the attention to detail.

[boost infested]

First world problem,I can't close my hood. After removing the underside bracing, the damn 4" elbow still in the way of the hood. Fast104 intake manifold, throttle body and a 4" elbow is just slightly too tall for the hood to close.

Second option, carbon creation hood. I personally don't like it but I made it some what closed for now. :keke:

https://farm4.staticflickr.com/3858/14926215420_14831b384a_c.jpg (https://flic.kr/p/oJYKPJ)[/url] (https://flic.kr/p/oJYKPJ)https://farm6.staticflickr.com/5579/14926213280_bd830a6f98_c.jpg (https://flic.kr/p/oJYKbQ) (https://flic.kr/p/oJYKbQ)



https://farm4.staticflickr.com/3894/15112866805_d1037e7fe5_c.jpg (https://flic.kr/p/p2toM4) (https://flic.kr/p/p2toM4)https://farm6.staticflickr.com/5579/14926316417_6c95c888c5_c.jpg (https://flic.kr/p/oJZgR4) (https://flic.kr/p/oJZgR4)

https://farm6.staticflickr.com/5570/14926299668_a204cee6a4_c.jpg (https://flic.kr/p/oJZbSh) (https://flic.kr/p/oJZbSh)https://farm4.staticflickr.com/3892/15112507312_419594a1b0_c.jpg (https://flic.kr/p/p2rxUU) (https://flic.kr/p/p2rxUU)

https://farm4.staticflickr.com/3883/14926322067_82dba37811_c.jpg (https://flic.kr/p/oJZiwt) (https://flic.kr/p/oJZiwt)https://farm4.staticflickr.com/3923/14926322687_1202858d3e_c.jpg (https://flic.kr/p/oJZiHa) (https://flic.kr/p/oJZiHa)

5 hours later lol :picardfp: I still like the factory hood style better.

https://farm6.staticflickr.com/5568/14926187149_b6df0e0bc7_b.jpg (https://flic.kr/p/oJYBqi) (https://flic.kr/p/oJYBqi)https://farm6.staticflickr.com/5593/14926228340_76da3b91c4_b.jpg (https://flic.kr/p/oJYPEu) [url=https://www.flickr.com/people/[email protected]/] (https://flic.kr/p/oJYPEu)

[smokescreen240]

Once again, loving the build good sir. Keep em comin'!

[1Day]

Time for a Origin Type 2 hood. Its only hitting in the front at the elbow? I would almost bet it will hit on the intake, right where it says LSX, once you got the eblow/tb to clear. Thats where my 102 just kisses the hood.

[Royal_T]

Amazing so far..

[boost infested]

Time for a Origin Type 2 hood. Its only hitting in the front at the elbow? I would almost bet it will hit on the intake, right where it says LSX, once you got the eblow/tb to clear. Thats where my 102 just kisses the hood.

I was just looking at the Origin hood.

The stock hood with the bracing removed the "LSXR" part will still touch the underside of the stock hood.

My carbon creation one will clear the "LSXR" part but the 4" elbow still touch the flat part of the under hood.

[angel mkiv]

We'll dam! Love everything so far but why not a dmax hood?

[Apex Eight]

So sick. Love it.

[d-man478]

Fucking gorgeous.

[Konster]

Damn this thing is going to be crasyyyy.

[510erv]

very nice build

[niscur29]

Hood clearance is one of the reasons I haven't got rid of my hood from my VH swap yet. While I'm over the molded cowl look it clears my fuel rail cross over line, NW102 and the 4" tubing with no issues.

I looked into the origin hood when I was VH and most of the vendors I asked said it was about 3/4-1" more clearance than stock. Might not be enough.

[w1zeman]

Have any pics of said vh hood? I am still contemplating on how to make mine shut on my s13

[boost infested]

I rather have the oem hood over any aftermarket. Maybe I can get the bodyshop to raise the centre of the hood for more clearance and still keep the factory hood.

[niscur29]

Have any pics of said vh hood? I am still contemplating on how to make mine shut on my s13

Search the kouki 180sx thread I have a few pics in there.

I rather have the oem hood over any aftermarket. Maybe I can get the bodyshop to raise the centre of the hood for more clearance and still keep the factory hood.

I wish I had kept my factory hood tossed it when I moved as the current hood was painted with the car. Problem I have now is if I get a new hood paint matching it etc.

[zeitgeist]

I'm glad I saw the size issue here.

About how much taller would you say the Fast intake is over stock?

Would you happen to know how the LS6 intake compares in size as well?

As for the hood clearance, maybe cut out the hood bracing where the intake sits?

[niscur29]

For my car it's not the actual intake manifold it's the 4" throttle body and tubing for the filter that would hit. I'm running A typhoon manifold that's just a wee bit taller than the ls6. The fast appears to be little taller than the ls6 but it's mostly the top portion of the largers TBs that hit. Stock ls6 TB is 85mm I think so it's much more compact than the 102mm units.

[boost infested]

I'm glad I saw the size issue here.

About how much taller would you say the Fast intake is over stock?

Would you happen to know how the LS6 intake compares in size as well?

As for the hood clearance, maybe cut out the hood bracing where the intake sits?

If you go back to the bottom of the first page you will see where its touching.

I say its atleast 1" taller than ls1 or ls6 intake. you are find with ls6 intake.

[1Day]

^correct 1" taller

[h2v7]

I want it badddd needs turbooo

[boost infested]

A few videos
HjHFM0Pzw2s

6lua118mC2c

Rz9j0bIKnaw

[Apex Eight]

Sounds so fucking beast. Ridiculously clean bay and cluster too. Love it.

[2muchboost]

BOOST....you sir just made my Friday just that much sweeter. This car is impeccable.

[OBEEWON]

I see what you are doing here.

Winning.

Go girl.

[Beas]

awesome coupe. how did u fix the header touching the rail problem?

[zeitgeist]

Can you explain your PCV/catch can setup as well as what's going on with that one for the coolant?
Curious if you upgraded to the LS6 valley

[Royal_T]

Car sounds soo good.. Question what Cooling system Refiller is that.. I was thinking about buying the Matco Tools one.

[boost infested]

awesome coupe. how did u fix the header touching the rail problem?

Sikky rechecked the header and it is within spec. Must be my 243 heads from a C6 Z06<< my guess. This is how I fixed.
https://farm4.staticflickr.com/3900/15044399018_6b592149da_b.jpg (https://flic.kr/p/oVqtFY)[/url] (https://flic.kr/p/oVqtFY)
https://farm6.staticflickr.com/5591/15207947196_b3a760761b_b.jpg (https://flic.kr/p/paSGS9) (https://flic.kr/p/paSGS9)


Can you explain your PCV/catch can setup as well as what's going on with that one for the coolant?
Curious if you upgraded to the LS6 valley

Google PCV ls1 there are a few ways depend on your setup.

Coolant:
Top nipple to over flow tank or to the ground
Second one down from the top nipple to the radiator
Bottom one is routed to a nipple in the thermostat housing.

https://farm4.staticflickr.com/3881/15227882631_09c0dae90f_b.jpg (https://flic.kr/p/pcCSYx)[url=https://www.flickr.com/people/[email protected]/] (https://flic.kr/p/pcCSYx)

Car sounds soo good.. Question what Cooling system Refiller is that.. I was thinking about buying the Matco Tools one. Not my refiller but it is a Snap On one.

[boost infested]

Finally, dyno tuned. 384HP 370TQ
LHVWNsn_pU0


2nd gear pull
1JR9d_Vu-Xw

[boost infested]

https://farm4.staticflickr.com/3911/15084998469_169e944f90_b.jpg (https://flic.kr/p/oZ1yuv)[/url] by [url=https://www.flickr.com/people/[email protected]/] (https://flic.kr/p/oZ1yuv)

Dyno Dynamics 450 DS

[laurentj23]

What made you choose the 102 over the 92?

[zeitgeist]

Disregard this post

[boost infested]

What made you choose the 102 over the 92?

Go big or go home.

[Beas]

maybe I missed it, but whats your exhaust setup look like? im really not happy with mine and am looking for some ideas. my ground clearance sucks, how is yours with scraping?

[boost infested]

maybe I missed it, but whats your exhaust setup look like? im really not happy with mine and am looking for some ideas. my ground clearance sucks, how is yours with scraping?

My good friend made the Y pipe to bolt up with the ISIS mbse exhaust. The RH side of the Y is very low 2" off the ground. He had to cut away some of the bracing on the Sikky transmission cross member so he can tucked the RH bank. The lowest points are the v bands from the headers. Yes they scrap on speed bumps.

https://farm6.staticflickr.com/5598/15246768298_606e79a380_b.jpg (https://flic.kr/p/peiF2u)[/url] (https://flic.kr/p/peiF2u)

https://farm4.staticflickr.com/3932/15431431801_6c79543ac8_b.jpg (https://flic.kr/p/pvC83Z) (https://flic.kr/p/pvC83Z)

https://farm4.staticflickr.com/3932/15248024698_49216d534d_b.jpg (https://flic.kr/p/peq7vy)
(https://flic.kr/p/peq7vy) by

https://farm3.staticflickr.com/2950/15431431861_ab8148e335_b.jpg (https://www.flickr.com/people/[email protected]/) (https://flic.kr/p/pvC852)

https://farm4.staticflickr.com/3935/15411559076_089dc1b385_b.jpg (https://flic.kr/p/ptSgzN) (https://flic.kr/p/ptSgzN)

https://farm4.staticflickr.com/3928/15246656250_4b774bedd9_b.jpg (https://flic.kr/p/pei6HC) [url=https://www.flickr.com/people/[email protected]/] (https://flic.kr/p/pei6HC)

[boost infested]

https://farm6.staticflickr.com/5601/15433368485_c8e577c7c5_b.jpg (https://flic.kr/p/pvN3L6)[/url] (https://flic.kr/p/pvN3L6)
https://farm4.staticflickr.com/3929/15246656230_ecbd1694d1_b.jpg (https://flic.kr/p/pei6Hh)[url=https://www.flickr.com/people/[email protected]/] (https://flic.kr/p/pei6Hh)

[Beas]

yeah, im having the same issue with my V-bands scraping.

so, its dual 3' into single 4 inch?

[boost infested]

yeah, im having the same issue with my V-bands scraping.

so, its dual 3' into single 4 inch?

header exits are 3.5" to single 3.5", isis mbse has 2 mufflers.

[rawgarage]

sick swap and execution

[boost infested]

yeah, im having the same issue with my V-bands scraping.

so, its dual 3' into single 4 inch?

Another view from the alignment rack

3.5" headers to 3" Y to single 3" isis mbse

https://farm6.staticflickr.com/5610/15495462746_6343aa96f9_b.jpg (https://flic.kr/p/pBhidN)[/url] (https://flic.kr/p/pBhidN)


Ground clearance fixed.. lol Speed bumps? :mrmeph:

https://farm3.staticflickr.com/2949/15518667655_077d60ca5e_b.jpg (https://flic.kr/p/pDkeer)[url=https://www.flickr.com/people/[email protected]/] (https://flic.kr/p/pDkeer)

[badbob2121]

My v-bands scrape from time to time too.. pretty much everyone I have talked to has said the same.

[Beas]

I cant believe u even attempt speed bumps. im to afraid of damaging one of my headers.

don't u think the 3' exit is a bit restrictive? that's what im at now and I don't like it.

[boost infested]

A small shoot before parking it for the winter season..

https://farm4.staticflickr.com/3934/15587761875_ea70a65ae6_h.jpg (https://flic.kr/p/pKrmx6)[/url] (https://flic.kr/p/pKrmx6)

https://farm4.staticflickr.com/3941/15588620972_c089013594_h.jpg (https://flic.kr/p/pKvKV7) [url=https://www.flickr.com/people/[email protected]/] (https://flic.kr/p/pKvKV7)

[boost infested]

Interior make over...

https://farm8.staticflickr.com/7465/15710172903_d5a1407222_b.jpg (https://flic.kr/p/pWfK54)[/url] [url=https://www.flickr.com/people/[email protected]/] (https://flic.kr/p/pWfK54)

[boost infested]

Slow progress over winter.. my laziness.

Front Wilwood BBK

https://farm8.staticflickr.com/7551/16311479181_562c24cae7_b.jpg (https://flic.kr/p/qRoAtF)[/url] (https://flic.kr/p/qRoAtF)

6lbs per caliper over 10lbs 300zx tt front caliper
https://farm9.staticflickr.com/8733/16628321940_8f1d0a0c8e_b.jpg (https://flic.kr/p/rkouMS) (https://flic.kr/p/rkouMS)


14.5lb two piece Wilwood rotor over 20lbs 300zx tt rotor
https://farm8.staticflickr.com/7643/16195792643_a562574b7a_b.jpg (https://flic.kr/p/qFaEUc) (https://flic.kr/p/qFaEUc)
https://farm9.staticflickr.com/8669/16628318520_54b3d6430f_b.jpg (https://flic.kr/p/rkotLU) (https://flic.kr/p/rkotLU)


https://farm9.staticflickr.com/8634/16629596159_498cf399ae_b.jpg (https://flic.kr/p/rkv2za) (https://flic.kr/p/rkv2za)
https://farm8.staticflickr.com/7635/16628339510_0f5969fe0c_b.jpg (https://flic.kr/p/rkoA1N) (https://flic.kr/p/rkoA1N)
https://farm9.staticflickr.com/8608/16608412867_34493abea8_b.jpg (https://flic.kr/p/riCsvZ) (https://flic.kr/p/riCsvZ)
https://farm8.staticflickr.com/7640/16814616511_a35f298a1a_b.jpg (https://flic.kr/p/rBRiFe)[url=https://www.flickr.com/people/[email protected]/] (https://flic.kr/p/rBRiFe)

[laurentj23]

How much did you pay for the wilwood brakes?

[JRex]

Love this car. BBK looks awesome

[apexis13sx]

Freaking amazinggggg

[1988montecarloss]

everything about this is awesome

and a free aero bumper? now im jealous :fawkd:

[Big Zee]

love your car, everything is so perfect!!
really wishing I had your wheels haha.

[boost infested]

First time doing this shit. Must get crafty lol

https://farm1.staticflickr.com/258/19306695364_28fd039845_b.jpg
https://farm1.staticflickr.com/293/19742644969_1d269d1541_b.jpghttps://farm1.staticflickr.com/287/19921748252_3a3148a863_b.jpg

https://farm1.staticflickr.com/427/19903106566_a87e0442e9_b.jpg

Glove box is next

https://farm1.staticflickr.com/298/19903095896_8ae08c4218_b.jpg
https://farm1.staticflickr.com/429/19921755532_c440287376_b.jpg
https://farm1.staticflickr.com/562/19903108256_7ececc9bcd_b.jpg

I made a rookie mistake here..
https://farm1.staticflickr.com/470/19744882419_bfd97a8e5c_b.jpg

The only solution other than re-wrapping it again.
https://farm4.staticflickr.com/3743/19310576783_dd5a93a569_b.jpg

[boost infested]

Down size the intake pipe so I can have a hood.
https://farm1.staticflickr.com/541/19906565926_f6638b74ac_b.jpg

Oem silvia hood is still the best. This will do for now.
https://farm4.staticflickr.com/3699/19925230222_c703eb9ec8_b.jpghttps://farm1.staticflickr.com/559/19932827825_d778571bc8_b.jpg

New center caps.
https://farm4.staticflickr.com/3705/19746074319_44db222700_b.jpghttps://farm1.staticflickr.com/492/19744807080_925a8d55a7_b.jpg

[nrmskate]

Absolutely beautiful build man. Love the cleanliness!

[2muchboost]

So damn glad this build is still going......it's one great example of a beautiful project. Keep it up my friend.

[JSimpson]

Every aspect of this car is beautiful. Wow. Props for perfection of the details!

[boost infested]

Absolutely beautiful build man. Love the cleanliness!

Thanks man

So damn glad this build is still going......it's one great example of a beautiful project. Keep it up my friend.

Oh yah, it is on going still.. interior incomplete


Every aspect of this car is beautiful. Wow. Props for perfection of the details!

thanks!

[mastadon]

Well, that escalated quickly.

[boost infested]

https://farm6.staticflickr.com/5815/20635212132_f50f97fb6a_h.jpg (https://flic.kr/p/xrsRDw)16 (https://flic.kr/p/xrsRDw) by Worth It (https://www.flickr.com/photos/worthitmedia/), on Flickr

https://farm1.staticflickr.com/737/20635225062_cb81ddbd97_h.jpg (https://flic.kr/p/xrsVus)14 (https://flic.kr/p/xrsVus) by Worth It (https://www.flickr.com/photos/worthitmedia/), on Flickr

https://farm1.staticflickr.com/665/20021827304_8a7091d0a7_h.jpg (https://flic.kr/p/wvg6H3)10 (https://flic.kr/p/wvg6H3) by Worth It (https://www.flickr.com/photos/worthitmedia/), on Flickr

Excuse the dead bugs and the unpainted bumper LOL... the rest here.. https://www.flickr.com/photos/worthitmedia

[Apex Eight]

So damn clean. Nice work man

[Hatemy7]

dam dude this thing is so fucking sick!!!

[boostzilla]

Damn this thing is sick! saw it a illmotion.

that lip is in fact a vanquish k's lip. super super rare. pretty sure its my old lip !

[boost infested]

Damn this thing is sick! saw it a illmotion.

that lip is in fact a vanquish k's lip. super super rare. pretty sure its my old lip !

I don't think its vanquish. I think it is a Chargespeed lip.

[boostzilla]

I don't think its vanquish. I think it is a Chargespeed lip.

maybe youre right? I know my old lip looked identical to this and it was a vanquish lip.

either way looks dope !

[[email protected]]

fuck me. this shit is GANGSTA!

[Dalton]

Subscribed :)

[RACEBREAD]

Hey boost infested when you get a chance can you post a picture looking straight at the frame and possibly give me a measurement of how much the headers hang lower then the frame. I'm trying to figure out how I can modify the headers for more clearance.

[boost infested]

Hey boost infested when you get a chance can you post a picture looking straight at the frame and possibly give me a measurement of how much the headers hang lower then the frame. I'm trying to figure out how I can modify the headers for more clearance.

I hope these help... with the help of the Campbell's soup can. LOL

https://farm1.staticflickr.com/603/21710183209_6ff0514085_h.jpg (https://flic.kr/p/z5sn6B)[/url] (https://flic.kr/p/z5sn6B)

https://farm1.staticflickr.com/573/21870902556_9597cbd51a_h.jpg (https://flic.kr/p/zjE6mQ)[url=https://www.flickr.com/photos/boostinfested/] (https://flic.kr/p/zjE6mQ)



A quick burnout vid
141182314

[TurboTiger]

Clean.

I wish most 240 builds were half as clean as this build. Good job!

[boost infested]

Hooning around... lol

141182314

XZp8JL7gCCk


ok I did a quick dip on the front bumper.
https://farm1.staticflickr.com/609/21794302799_6e9c625ab2_h.jpg (https://flic.kr/p/zcTuVn)img_4033-copy (https://flic.kr/p/zcTuVn) by JACK (https://www.flickr.com/photos/boostinfested/), on Flickr

[Apex Eight]

Sounds and looks so damn good man

[wsmiteh]

Saw this thing today for the first time on the cruise to banff, didn't occur to me that you're local!!! Car looked so good, keep up the awesome work!!

-Black s14

[boost infested]

Thanks guys!



Saw this thing today for the first time on the cruise to banff, didn't occur to me that you're local!!! Car looked so good, keep up the awesome work!!

-Black s14


Oh you are the guy with the black s14? Your buddy was hanging out of your car to take pictures on the highway lol. Got any pics?

[wsmiteh]

yea hahaha he has a bunch, he said he's editing them tonight. Ill link you as soon as I get em! :2f2f:

[tuzzio]

Seriously one of my favorite coupes. If you ever sell the kf's...PM me.

[91 240]

Nice work man!! Looks sharp

[300ztt]

such a amazing build. enjoyed every page of it. are you running the 4 port steam vent? of you kept the rear blocked off?

[Tucker240]

--Deleted--

[GojiraCometh]

Perfection. Literally.

[boost infested]

such a amazing build. enjoyed every page of it. are you running the 4 port steam vent? of you kept the rear blocked off?


Rear ports blocked

This build is nuts! Well done sir! Hopefully i can get around to finishing mine and starting a build thread. As for your burnouts...needs more line lock lol


Life got in the way. I know I need line lock.


Sent from my iPhone using Tapatalk

[boost infested]

A small update. I know I am going to the dark side - fibreglass panels. Koguchi Power 50mm front and 70mm rear.

Over night parts from Japan.
http://uploads.tapatalk-cdn.com/20160311/74a939f82bb1ee5e9fa65c80abc2b0b8.jpg

http://uploads.tapatalk-cdn.com/20160311/e1a7a7af006f16a1bd0a4af946b91b1a.jpg

[blue88coupe]

Where did you buy them head lights / corner lights / blinker lights and glass hood from?

Car looks badass BTW.

[2muchboost]

Oh no! I loved the body as you had it but I am hopeful because you have some great taste and execute well. I will be keeping an eye out for your updates. Your build was literally the build that made me want to start an LSx-Coupe some day.

[boost infested]

Where did you buy them head lights / corner lights / blinker lights and glass hood from?



Car looks badass BTW.


Corners and blinkers were bought new from dealer. They were able to locate me brand new ones. Head lamps I bought from a member here


Sent from my iPhone using Tapatalk

[Gingersmurf]

https://farm1.staticflickr.com/609/21794302799_6e9c625ab2_h.jpg (https://flic.kr/p/zcTuVn)img_4033-copy (https://flic.kr/p/zcTuVn) by JACK (https://www.flickr.com/photos/boostinfested/), on Flickr

Reminds me a ton of broadfields car, absolutely gorgeous car. Good luck with the overs!

[boost infested]

Thanks man. Toby's car is at a whole new level. Too bad his project had to end the way it did.

Reminds me a ton of broadfields car, absolutely gorgeous car. Good luck with the overs!





Sent from my iPhone using Tapatalk

[PoorMans180SX]

Koguchi Power FTW! Good taste as always sir, keep it up.

[ka-titties]

noooooooo

so much love for stock sheet metal. at least you got good stuff.

[tricky_ab]

A small update. I know I am going to the dark side - fibreglass panels. Koguchi Power 50mm front and 70mm rear.


https://49.media.tumblr.com/2adae876f24fdd8ff0e0c89590d755bf/tumblr_o1aetsSb9C1v5lz7ho1_500.gif

[boost infested]

Ughh the guilt of cutting the good stock sheet metal... I know.


Sent from my iPhone using Tapatalk

[Heywood Jablomie]

Stock body is cool, but kp overs=
http://i.imgur.com/NOkrIWm.gif

[wsmiteh]

I completely forgot to get back to you about some photos my buddy took last fall on a cruise out to banff, I guess he ended up corrupting his card or something like that so unfortunately they went the way of the T-Rex. Pretty stoked to see what you do with the KP overs, what do you have in mind for footwork to keep up!?

[tuzzio]

Overs?

http://a.fod4.com/images/GifGuide/michael_scott/The-Office-gifs-the-office-14948948-240-196.gif

[ka-titties]

yeah i might have to unsubscribe this thread. i dont want to be caught in fits of uncontrollable weeping after i see you cut up that perfect body.

[tuzzio]

More importantly, if you sell that lip...PM me immediately.

[boost infested]

Damn decisions...

http://uploads.tapatalk-cdn.com/20160314/fc518f8e7fbb89dc76e488527100f793.jpg


Sent from my iPhone using Tapatalk

[scottie]

I'll be honest. Full disclosure I love wide body S13, hence why I doing it on mine (mostly out of necessity but the body it crap). But when I saw you are going wide body on this chassis my first thought was DONT DO IT!!! Ultimately it's your car, build it how you see it. Just keep in mind it's getting real hard to find S13 chassis as beautiful as yours. I know I wouldn't have it in my to take an air saw to those quarters lol

[tuzzio]

Agreed with scottie. I'm a big stock body fan, but based on your taste alone...i'd assume the car won't be a beat and trashy rivet everything car.

Aside from the vanquish lip, if you wanna sell the rear bomex joint, also holla. haha

[BoostyMcZface]

beautiful build so far man. sorta sad with the overs, but as someone else said.. this has been so well executed, i can't wait to see how it looks with them on. i'd love my bay to end up this clean once i drop the LS in. in for more progress pics / interior :)

[boost infested]

No no god please no! LOL

http://uploads.tapatalk-cdn.com/20160429/2dcd4903ef1e75837a67e4af66b46405.jpg


Sent from my iPhone using Tapatalk

[boost infested]

Ok That was a joke. My friend was trying to scare me.

Refinishing some of the aesthetic parts. FAST intake cover painted with Porsche Guards red and the valve covers with Cadillac Black Ice. LAMIN-X orange the tail lights. More to come...

http://uploads.tapatalk-cdn.com/20160429/7127bb422e21c215850e465aad7376ac.jpghttp://uploads.tapatalk-cdn.com/20160429/ee4e2968571db16407939b52e73aeaee.jpghttp://uploads.tapatalk-cdn.com/20160429/6bff40ff24d8d40ee72c175fbe4a5045.jpghttp://uploads.tapatalk-cdn.com/20160429/7b07ccc4acc1d6abf642982c9f1359a2.jpg

[boost infested]

What a hectic couple of weeks.. I was rushing to get my car ready for a carshow #Driven2016

Long story short I fucked up my left fender rolling/pulling before paint. Thank god I found a pair of oem s13 silvia fenders near by.
https://c6.staticflickr.com/8/7401/27276365525_421028706a_b.jpg (https://flic.kr/p/Hyjvbe)[/url] (https://flic.kr/p/Hyjvbe)
https://c1.staticflickr.com/8/7388/27242481216_2374b9739f_b.jpg (https://flic.kr/p/HvjQy1) (https://flic.kr/p/HvjQy1)

Finally an one color s-chassis

https://c8.staticflickr.com/8/7427/27206153591_944b91c20b_b.jpg (https://flic.kr/p/Hs7DBD) (https://flic.kr/p/Hs7DBD)

https://c5.staticflickr.com/8/7069/27242482996_a2e34245ba_b.jpg (https://flic.kr/p/HvjR5G) (https://flic.kr/p/HvjR5G)https://c2.staticflickr.com/8/7647/26670435153_f5e9f570fb_b.jpg (https://flic.kr/p/GCLXbR) (https://flic.kr/p/GCLXbR)

Back from paint..
https://c8.staticflickr.com/8/7238/26670434623_75fa880b19_b.jpg (https://flic.kr/p/GCLX2H) (https://flic.kr/p/GCLX2H)

Engine bay stuff done..
https://c3.staticflickr.com/8/7139/27242480826_bf0985683c_b.jpg (https://flic.kr/p/HvjQrh)[url=https://www.flickr.com/photos/boostinfested/] (https://flic.kr/p/HvjQrh)

[boost infested]

Little details.. from clear hoses to black braded hoses. Finally a bride shifter boot to cover up that hole!
https://c4.staticflickr.com/8/7258/26670431003_f40f1bd8cb_b.jpg (https://flic.kr/p/GCLVXi)[/url] (https://flic.kr/p/GCLVXi)https://c6.staticflickr.com/8/7757/27276370165_0ed4e8668b_b.jpg (https://flic.kr/p/Hyjwye) (https://flic.kr/p/Hyjwye)https://c3.staticflickr.com/8/7407/27179382042_9b2961b30c_b.jpg (https://flic.kr/p/HpKrnd) (https://flic.kr/p/HpKrnd)

Dents pulled, paint polished and sealed.. camber is max'd up front because I didn't pull them. I was scared to fuck it up again so I only did a roll job.
https://c6.staticflickr.com/8/7347/27206156341_c6a6f9c88f_b.jpg (https://flic.kr/p/Hs7Er4) (https://flic.kr/p/Hs7Er4)

On the ground and outside for the rest of the body pieces..
https://c1.staticflickr.com/8/7029/27000672560_da3ff882c6_b.jpg (https://flic.kr/p/H8Xvgf) (https://flic.kr/p/H8Xvgf)

https://c5.staticflickr.com/8/7585/26808138012_b4f22a38fe_b.jpg (https://flic.kr/p/GQWHs5) (https://flic.kr/p/GQWHs5)
https://c7.staticflickr.com/8/7472/26296212934_970f6fc748_b.jpg (https://flic.kr/p/G4GXXC) (https://flic.kr/p/G4GXXC)
https://c2.staticflickr.com/8/7404/26901447945_f64f49b638_b.jpg (https://flic.kr/p/GZbXf2) (https://flic.kr/p/GZbXf2)

I am not sure what this dude was doing...
https://c2.staticflickr.com/8/7184/26832525921_f014d218a4_b.jpg (https://flic.kr/p/GT6H8g) (https://flic.kr/p/GT6H8g)


[url]http://www.speedhunters.com/2016/05/canadian-car-culture-on-display/

[tuzzio]

Those UAC headlight covers are pretty cool looking

[Black240Ct]

what swirl pot is that? swap looks good!

[boost infested]

what swirl pot is that? swap looks good!

Power by Max with Asahi over flow bottle.

[cured13]

is this still "going on"
or
should I apologize for ressurecting dead thread?

[boost infested]

https://uploads.tapatalk-cdn.com/20170123/1962d45da76faa3f7c04268ebfb8b5cc.jpg

Not done yet. Hopefully an update coming soon..


Sent from my iPhone using Tapatalk

[EFITTZY]

Any updates? Fantastic work. I'm not normally a fan of V8 swaps, but I can appreciate your dedication and attention to detail!:bow:

[forgotten]

updates? car lookes very good !!!

[Unit 02]

i have the same tranny in my hatch :)

super nice car

[Leon43]

I wanna buy those what are the specs? Offset? Tire size?? Fender modifications?