Mr.James
06-18-2014, 09:59 PM
So I really did not want to make this decision, however, I need a driveshaft and new intercooler core to complete my v-mount 1J swap. If pricing seems unfair, I will gladly take note and adjust accordingly. I am not looking to have this sit online overpriced receiving bunk low ball offers worth less than a Zenki 14 front or something, nor am I going to bother responding to such offers. It is a tough decision to part with this, as it has been within a tight group of friends for approx 8 years now, but i realized that this would be a good chance to get this swap completed.
Parts include:
*Genuine S15 metal hood, drilled for hood pins. The hood is in pretty damn good shape and to be honest, to me, should be much more of a sought after piece, opposed to a vented carbon/fiberglass one.
*Genuine Hippo Sleek (to the best of my knowledge) Front Bumper. This is not a flimsy, cheap part by any means. This is a quality Fiberglass piece, and I can say is much thicker than my Origin Lab one. There is a slit cut out for a tow hook on one side.
*Both headlight assemblies (non HID). These, although could be a little better (a little hazy, as are 90% of plastic assemblies), are still in really good shape. They had one hole drilled up from the bottom of each housing to acomidate a strobe light. My buddy picked this front end up years ago which he was told came off a competitive car out west, so please dont harass me about drilling into the oem hood or into the headlights haha.
***Lastly, the bad....***
These fenders are JUNK. They are cheap, garbage quality, thin s14.5 conversion fenders (which is why they fits super retarded at the doors in the pics). I have considered this issue and it reflects in my pricing. Although they suck, they will get the swap together until an upgrade is made.
Prices are what i feel is fair, and yes I am aware that everyone on earth wants things handed to them, but this is a sick front end, just needs the right buyer who understands that body work is needed to all parts before paint.
http://i274.photobucket.com/albums/jj263/mrjames240/995577_592039660875608_1343521435_n_zps63624362.jp g (http://s274.photobucket.com/user/mrjames240/media/995577_592039660875608_1343521435_n_zps63624362.jp g.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1526468_592032520876322_1556099048_n_zpsdcadd238.j pg (http://s274.photobucket.com/user/mrjames240/media/1526468_592032520876322_1556099048_n_zpsdcadd238.j pg.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1476146_576015975811310_241130969_n_zps850bd843.jp g (http://s274.photobucket.com/user/mrjames240/media/1476146_576015975811310_241130969_n_zps850bd843.jp g.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1472049_576003992479175_1125676519_n_zpsfd3f12ed.j pg (http://s274.photobucket.com/user/mrjames240/media/1472049_576003992479175_1125676519_n_zpsfd3f12ed.j pg.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1469781_576003955812512_1228165161_n_zpsdf290a60.j pg (http://s274.photobucket.com/user/mrjames240/media/1469781_576003955812512_1228165161_n_zpsdf290a60.j pg.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1470197_575897472489827_1898603898_n_zps7ecb8cf3.j pg (http://s274.photobucket.com/user/mrjames240/media/1470197_575897472489827_1898603898_n_zps7ecb8cf3.j pg.html)
Both headlights are included, i just never cut the hole in the support to start fitting it. The whole front end was just set up to the car pretty much to get a visual idea. The bumper, headlights, and hood all fit very nicely together.
I am looking to get within the ballpark of $750.00 For all parts. I am not opposed to parting this out, but not without interest for the other parts.
If sold seperately, prices will start as follows:
Hood- $350
Bumper- $250
Lights- $300
Fenders- $75
Absolutely no trades, unless you miraculously have a R154 to s13 driveshaft and a length of 44 1/2 inches, or an intercooler core suitable for a v-mount configuration... example, inlet/outlet facing back...
Thank you for looking, Contact via PM or reply here, Jim
Parts include:
*Genuine S15 metal hood, drilled for hood pins. The hood is in pretty damn good shape and to be honest, to me, should be much more of a sought after piece, opposed to a vented carbon/fiberglass one.
*Genuine Hippo Sleek (to the best of my knowledge) Front Bumper. This is not a flimsy, cheap part by any means. This is a quality Fiberglass piece, and I can say is much thicker than my Origin Lab one. There is a slit cut out for a tow hook on one side.
*Both headlight assemblies (non HID). These, although could be a little better (a little hazy, as are 90% of plastic assemblies), are still in really good shape. They had one hole drilled up from the bottom of each housing to acomidate a strobe light. My buddy picked this front end up years ago which he was told came off a competitive car out west, so please dont harass me about drilling into the oem hood or into the headlights haha.
***Lastly, the bad....***
These fenders are JUNK. They are cheap, garbage quality, thin s14.5 conversion fenders (which is why they fits super retarded at the doors in the pics). I have considered this issue and it reflects in my pricing. Although they suck, they will get the swap together until an upgrade is made.
Prices are what i feel is fair, and yes I am aware that everyone on earth wants things handed to them, but this is a sick front end, just needs the right buyer who understands that body work is needed to all parts before paint.
http://i274.photobucket.com/albums/jj263/mrjames240/995577_592039660875608_1343521435_n_zps63624362.jp g (http://s274.photobucket.com/user/mrjames240/media/995577_592039660875608_1343521435_n_zps63624362.jp g.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1526468_592032520876322_1556099048_n_zpsdcadd238.j pg (http://s274.photobucket.com/user/mrjames240/media/1526468_592032520876322_1556099048_n_zpsdcadd238.j pg.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1476146_576015975811310_241130969_n_zps850bd843.jp g (http://s274.photobucket.com/user/mrjames240/media/1476146_576015975811310_241130969_n_zps850bd843.jp g.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1472049_576003992479175_1125676519_n_zpsfd3f12ed.j pg (http://s274.photobucket.com/user/mrjames240/media/1472049_576003992479175_1125676519_n_zpsfd3f12ed.j pg.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1469781_576003955812512_1228165161_n_zpsdf290a60.j pg (http://s274.photobucket.com/user/mrjames240/media/1469781_576003955812512_1228165161_n_zpsdf290a60.j pg.html)
http://i274.photobucket.com/albums/jj263/mrjames240/1470197_575897472489827_1898603898_n_zps7ecb8cf3.j pg (http://s274.photobucket.com/user/mrjames240/media/1470197_575897472489827_1898603898_n_zps7ecb8cf3.j pg.html)
Both headlights are included, i just never cut the hole in the support to start fitting it. The whole front end was just set up to the car pretty much to get a visual idea. The bumper, headlights, and hood all fit very nicely together.
I am looking to get within the ballpark of $750.00 For all parts. I am not opposed to parting this out, but not without interest for the other parts.
If sold seperately, prices will start as follows:
Hood- $350
Bumper- $250
Lights- $300
Fenders- $75
Absolutely no trades, unless you miraculously have a R154 to s13 driveshaft and a length of 44 1/2 inches, or an intercooler core suitable for a v-mount configuration... example, inlet/outlet facing back...
Thank you for looking, Contact via PM or reply here, Jim