FS/TW: Parting out my 1K HP KA build maybe....

[smbonn2005]

May be parting out my build to move onto something else, need money asap to buy it though so if your interested shoot me offers!!! Everything is new unless it says otherwise!

Borg Warner S366 T3 .70 A/R - $900
http://i11.photobucket.com/albums/a190/smbonn/5f467bc4-0ddc-40d3-bc83-908791c39cf7.jpg

Custom Turbo Manifold T3 44mm vband wastegate flange - $600
http://i11.photobucket.com/albums/a190/smbonn/Forums/3549ea5d-50d2-4806-ba8b-6f077a8add64.jpg

Brian Crower 272/272 Cams - $300
http://i11.photobucket.com/albums/a190/smbonn/Forums/102_1020.jpg

Supertech Dual valve spring w/ Ti retainer kit - $400
http://i11.photobucket.com/albums/a190/smbonn/20140624_152943.jpg

JWT Adjustable Cam Sprockets - SOLD

Used Ford Performance 1650cc Injectors (Just had cleaned and flow tested, all are perfect) - $300

Eagle H Beam Connecting Rods - $320

Full ZEX Direct Port Nitrous Wet Shot Kit + Purge kit - $1000

Xcessive Manufacturing Intake Manifold w/ Q45 Throttle Body - $500
http://i11.photobucket.com/albums/a190/smbonn/Forums/Photo0182.jpg

Z32 Full Brake swap w/ ebrake and Aluminum 30mm front calipers - $300

Z33 Track front rotors - $100

Z32 Calipers to Z33 Fr. Rotors adapter bracket w/ bolts - $100
http://i11.photobucket.com/albums/a190/smbonn/Forums/SDC10145.jpg

Z32 5 speed N/A Trans (no grinds, all new gaskets, currently apart to regasket - will be together before pickup) - $250
http://i11.photobucket.com/albums/a190/smbonn/20140624_153649.jpg

Xcessive Z32 Trans to KA adapter kit (no driveshaft, with short shifter extension and short throw shifter) - $650

Xcessive Upper Oil pan w/ NEW SR Lower - $350
http://i11.photobucket.com/albums/a190/smbonn/Oilpan_zps568201d0.jpg
http://i11.photobucket.com/albums/a190/smbonn/20140624_153320.jpg

Used QR25 Cam Followers (would need slight machining to get valve tolerance to specs, but one piece) - $50
http://i11.photobucket.com/albums/a190/smbonn/IMAG0288-1.jpg

Behrman/Wise Square Type 1 Front Bumper (Doubt this will sell here but super rare and really expensive) - $1000
http://i11.photobucket.com/albums/a190/smbonn/IMAG0278.jpg

Used Skull & Bones Oil block - SOLD

Used Rust free "JDM" S14 rear subrame - $100
http://i11.photobucket.com/albums/a190/smbonn/IMAG0191.jpg

GKTech S14 Diff solid Bushings - SOLD
http://i11.photobucket.com/albums/a190/smbonn/20140621_085140.jpg

Full set of S13 Silvia front Lights (mint bricks except for a jb welded bracket (cracked slightly and Im ocd) and smoked corners and turns) - $500
http://i11.photobucket.com/albums/a190/smbonn/IMAG0121.jpg

Beercan's -8 AN Fuel Rail - $100

5 Lug swap hubs (machined J30 fronts and z32 rears) - $250
http://i11.photobucket.com/albums/a190/smbonn/Forums/IMAG0094.jpg

Professionally Ported KA24DE head - $350
http://i11.photobucket.com/albums/a190/smbonn/Forums/100_0928.jpg
http://i11.photobucket.com/albums/a190/smbonn/Forums/100_0930.jpg
http://i11.photobucket.com/albums/a190/smbonn/Forums/100_0931.jpg

Greddy Oil Filter Adaptor for Cooler - $80
http://i11.photobucket.com/albums/a190/smbonn/IMAG0130.jpg

Used K-sport S13 Coilovers (brand new spring seats and collars, still needs threads cleaned up a little, will include tool to do so) - $500

Used S15 HLSD (NO OUTPUT SHAFTS) - $200
http://i11.photobucket.com/albums/a190/smbonn/20140624_153415.jpg

KA'DE Front Cover Lower and Upper - $70
KA'DE Rear Main Seal Holder - $20
http://i11.photobucket.com/albums/a190/smbonn/20140624_153048.jpg

KA'DE Thermostat Housing - $20
http://i11.photobucket.com/albums/a190/smbonn/20140624_153138.jpg

Stock FC RX7 Oil Cooler - $30
http://i11.photobucket.com/albums/a190/smbonn/20140624_153004.jpg

Clevite Main Bearing set (Still Packaged)- $35
http://i11.photobucket.com/albums/a190/smbonn/20140624_152916.jpg

KA'DE Valve Guides - $50
http://i11.photobucket.com/albums/a190/smbonn/20140624_152854.jpg

Red OBX Pulley Set (No CRank Pulley!) - $100
http://i11.photobucket.com/albums/a190/smbonn/20140624_152828.jpg


I have more but that's all I can think of right now, Oh and the shell will be for sale as well. S13 Hatch, no front fenders or bumper, Megan Coilovers w/ emotor adjustable arms.

[TurboVinny]

Do you have pictures of the bricks?

[smbonn2005]

Pics have been added

[signals13]

Was the head flow tested? S14 or s13 head? And can it use stock valves?

[Mista Lee]

wish you were local.. i'd be all over the trans/adapter

good luck

[smbonn2005]

Signal - You have a PM!
Mista Lee - thanks!

[smbonn2005]

More parts added, as well as new pictures!!!

[abcdefg123]

Z trans and adapter kit 9542103158

[d_nice]

good parts here

[Joshua240]

I have a 96 240sx and looking to do a 5 lug swap. is that what i need to do it is your 5 lug?

[Memberofthe600hpkaclub]

I hope you didn't pay a lot for that "professional port job" because all they did was run a sand paper bit in the throat and open the gasket surface up

[smbonn2005]

This thread is no longer being updated, new thread is at http://zilvia.net/f/showthread.php?t=572271

Please close!