slmdstnc
06-16-2014, 02:01 PM
Update: I do still have everything whole. I need all of it gone as money is tight. Offer away and help me out. ~$4300
I'm willing to negotiate on selling everything listed below.
The time has come to part ways and get rid of everything 240sx I own. The shell is full other than a hood and drivers side fender, and an unpainted origin stylish bumper. The car is white in color, and in good shape. 8/10 for it being a 1995. Absolutely no rust on the body or frame rails. The interior is fitted with kouki se seats and the white face cluster. All in excellent shape no burns, tears, or stains for that matter. Suspension has been fully glanced over before it sat in storage for a little over a year and needed nothing. Mind you, it has stance super sport coils and 5 lug se hubs all around. Not sure what else to name so just ask.
I had my KA24DE built by some shop in Melrose Park with wiseco pistons, eagle rods, arp everything, cometic hg, brand new oil pump, and etc. My original plan was to slap my HX35 turbo w/ a 16mm hot side to it using a log manifold and running 740cc injectors but times changed and my project came to an end. There's a F1 chromoly flywheel paired to the crank, and an ACT stage 3 street disc and HD pressure plate installed.
To run all that I've got an AEM EMS that comes with some preset tunes but never have I messed around with that.
All in all I've got just about everything to complete this project but would prefer to move on as I just don't have the time.
Below is a listing of all parts I can think of:
Brand New
KA24DE*T
● Decked and honed
● Wiseco 9.0.1. Pistons
● Eagle forged rods
● Arp head studs
● Arp main studs
● Clevite rod and main bearings
● Cometic hg
● Head hot tanked and cleaned
● Valve stem seals
● Hx35 16mm
● Jgs log manifold with v*band
● Down pipe
● Unknown large FMIC
● Beercan style fuel rail(top feed)
● Precision 740cc injectors
● Oem front cover with oil pump
● Oem main seal
● Act 6 puck w/ hd pressure plate
● F1 chromoly flywheel
● Act flywheel bolts
● Oem timing components
240SX
● Stance Super Sport Coils
● XXR 527 17x 9.5's all around
● Apexi N1 Exhaust
● Kouki front headlights
● Kouki rear taillights
● Kouki interior
● Origin Stylish front bumper(needs paint)
● Unknown nice sideskirts
Extras
● 300ZX front calipers
● AEM EMS ECU
● Old front cover, pistons, rods
Parts I do not have:
● Kouki hood
● Kouki drivers side fender
● AC condenser
● AC compressor
Im looking to sell whole, offer away; I NEED IT GONE.
Will trade for running and driving cars, or bikes.
I tried writing this ad up as thorough as possible, if you have any questions or inquiries please reach me at (847)751-0417 , either through text or call. PM me otherwise
I'm willing to negotiate on selling everything listed below.
The time has come to part ways and get rid of everything 240sx I own. The shell is full other than a hood and drivers side fender, and an unpainted origin stylish bumper. The car is white in color, and in good shape. 8/10 for it being a 1995. Absolutely no rust on the body or frame rails. The interior is fitted with kouki se seats and the white face cluster. All in excellent shape no burns, tears, or stains for that matter. Suspension has been fully glanced over before it sat in storage for a little over a year and needed nothing. Mind you, it has stance super sport coils and 5 lug se hubs all around. Not sure what else to name so just ask.
I had my KA24DE built by some shop in Melrose Park with wiseco pistons, eagle rods, arp everything, cometic hg, brand new oil pump, and etc. My original plan was to slap my HX35 turbo w/ a 16mm hot side to it using a log manifold and running 740cc injectors but times changed and my project came to an end. There's a F1 chromoly flywheel paired to the crank, and an ACT stage 3 street disc and HD pressure plate installed.
To run all that I've got an AEM EMS that comes with some preset tunes but never have I messed around with that.
All in all I've got just about everything to complete this project but would prefer to move on as I just don't have the time.
Below is a listing of all parts I can think of:
Brand New
KA24DE*T
● Decked and honed
● Wiseco 9.0.1. Pistons
● Eagle forged rods
● Arp head studs
● Arp main studs
● Clevite rod and main bearings
● Cometic hg
● Head hot tanked and cleaned
● Valve stem seals
● Hx35 16mm
● Jgs log manifold with v*band
● Down pipe
● Unknown large FMIC
● Beercan style fuel rail(top feed)
● Precision 740cc injectors
● Oem front cover with oil pump
● Oem main seal
● Act 6 puck w/ hd pressure plate
● F1 chromoly flywheel
● Act flywheel bolts
● Oem timing components
240SX
● Stance Super Sport Coils
● XXR 527 17x 9.5's all around
● Apexi N1 Exhaust
● Kouki front headlights
● Kouki rear taillights
● Kouki interior
● Origin Stylish front bumper(needs paint)
● Unknown nice sideskirts
Extras
● 300ZX front calipers
● AEM EMS ECU
● Old front cover, pistons, rods
Parts I do not have:
● Kouki hood
● Kouki drivers side fender
● AC condenser
● AC compressor
Im looking to sell whole, offer away; I NEED IT GONE.
Will trade for running and driving cars, or bikes.
I tried writing this ad up as thorough as possible, if you have any questions or inquiries please reach me at (847)751-0417 , either through text or call. PM me otherwise