View Full Version : Wiring info needed
Danchamp
06-11-2014, 08:06 PM
Hey Guys!!
I am getting ready to install a s14 blacktop sr20det in my 95' kade 240sx
The sr comes complete with tranny ecu and harness. My ? is will the harness work with the cluster, a/c etc... and if not, what do you guys recommend doing or getting to get everything to work.
Thanks
Dan
KoukiMonsta
06-12-2014, 01:53 PM
please search next time
http://www.frsport.com/SR20DET-Swap-Engine-Harness-Wiring-Diagram-Guide-SR-SR20_t_26.html
Danchamp
06-12-2014, 03:26 PM
please search next time
http://www.frsport.com/SR20DET-Swap-Engine-Harness-Wiring-Diagram-Guide-SR-SR20_t_26.html
I'm kida new here and have to get used to the forum format
Thanks for the reply
Dan
angel mkiv
06-12-2014, 03:44 PM
Get a wiring specialties harness!its brand new and you won't have wiring issues..it will be plug and play and you won't deal with the headache or tracking down wiring issues..
Danchamp
06-12-2014, 04:19 PM
Get a wiring specialties harness!its brand new and you won't have wiring issues..it will be plug and play and you won't deal with the headache or tracking down wiring issues..
After reading more stuff that's exactly what I'll do.
Thank you:rawk:
Dan
If you wire your own - the frsport guide leaves out the blue and red wire for coil packs. It needs to be wired to source voltage or your car won't start.
Danchamp
06-28-2014, 04:04 AM
If you wire your own - the frsport guide leaves out the blue and red wire for coil packs. It needs to be wired to source voltage or your car won't start.
Ok thanks
I decided to order a full harness from wiring specialties... to make my life easier...
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.