The super mega ultimate deal saver of the millennium...you buy stuff now!*!*!*!*!*!

[Imarvin240]

Okay, So I have been building my SR22VE-T for the past few years and counting , with the help of Touge Factory. These are all the parts that so far are not going on the car, didn't end up being needed for the build, or are just things I've had in storage. Some are new and some are used. IF IT'S NOT LISTED, I'M NOT SELLING IT! I will accept money...no trades. Prices are firm unless otherwise stated!

1 Gallon AEM Methanol Injection Tank and AEM Filter
- BRAND NEW IN BOX!
-Tank - $45
- Filter - $18
https://scontent-b-iad.xx.fbcdn.net/hphotos-frc3/t1.0-9/10363753_10152545395976754_2376190666459638167_n.j pg

WedsSport SA-55M 18x9 + 20 and 18x10 +18 (5x114.3) with Center Caps
- BRAND NEW IN BOX!
- $1,700
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash2/t1/393733_10150543522541754_763549644_n.jpg

Hydraulic E-Brake with Wilwood Master
- BRAND NEW IN BOX!
$120
https://scontent-a-iad.xx.fbcdn.net/hphotos-ash3/t1.0-9/1939865_10152396179226754_1046840857_n.jpg

HKS EVC VI Boost Controller
- BRAND NEW IN BOX!
- $450 (Retail: ~$700)
This shows everything it can do: http://www.z1motorsports.com/350_g35/product_info.php?products_id=838
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/63945_10151600611856754_600813697_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/580292_10151600611701754_1562084525_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/216622_10151600611561754_5438022_n.jpg

Tarox B27-6 piston E-Brake Caliper for 24mm rotors (will need custom mounting bracket)
- BRAND NEW IN BOX!
- $250
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/574947_10151179252626754_410597425_n.jpg

RacePak Vnet EFI Interface Module for AEM
- This allows you to hook up an AEM ecu to a RacePak cluster
- BRAND NEW IN BOX!
- $250 (Retail: ~$375)
https://scontent-a-lga.xx.fbcdn.net/hphotos-ash3/395178_10150621142321754_1428113176_n.jpg

Votion Liquid to Air Intercooler Kit (Custom order...not sold as a kit)
- Capable of supporting up to 1000+hp
- BRAND NEW IN BOX!
- Kit includes: 26X7X3.5 Heat Exchanger, Fill Cap, Ice Box, Bosch pump, Dual 7" fans, 15X6.5X6 Long Flow Intercooler
- $650 (RETAIL = $850+)
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/305711_10150422775761754_591131990_n.jpg

SR Timing Chain Tensioner
- ~3k miles
- Perfect Shape
- $40
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/420668_10150723302656754_1773963129_n.jpg

SR20det Oil Pan
- Mounted Only/Never Used
- $90
https://scontent-b-iad.xx.fbcdn.net/hphotos-ash4/t1.0-9/10325660_10152545395751754_1959979751346579106_n.j pg

SR20 Extended Oil Pickup
- NEVER USED!
- $45
https://scontent-b-iad.xx.fbcdn.net/hphotos-prn2/t1.0-9/10402751_10152545395831754_8625940157766833221_n.j pg

SR20 Oil Pump Gear and Rear Pump Cover
- Never Used!
- $45
https://scontent-a-iad.xx.fbcdn.net/hphotos-prn2/t1.0-9/10003475_10152406934171754_402843382_n.jpg

Cam Angle Sensor Gasket and O-ring
- Perfect Shape
- $4
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/582127_10151117824941754_1095955387_n.jpg

Intake and Exhaust Cam Gear Bolts
- PERFECT SHAPE!
- $2 each
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/389608_10150742104266754_230685035_n.jpg

SR20 Head Bolts
- Used
- $10
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/391521_10151117825236754_1233010837_n.jpg

KU Engineering Style S13 Intake Manifold
- Never Used (just sitting around for about 3yrs, but the last owner drilled injector port 1 larger to put larger injectors in but then sold it to me...costs about 60 to do it to the other 3 or 40 to correct port 1)
- $90
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/387242_10150480663521754_731518754_n.jpg

SR20 Upper Oil Pan - $20 - 1 left
SR20 Oil Pump - SOLD!
SR20 Oil Screens - $10 - 2 sets left
SR20 Rear Crank Case Cover - $5 - 4 left
SR20 Oil Block Galley w/ Sensor - $10 - 1 left
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/396250_10150613024401754_747358470_n.jpg

SR Main Cap Girdle
- PERFECT SHAPE
- $10 each
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/533372_10150834795496754_1356505300_n.jpg

SR Coolant Tubes - $15
SR Short Tubes - $3
SR Temp. Sensor Housing - $8
SR Thermostat Housing - $8
SR Coolant Inlet - $8
SR Coolant Complete Setup w/ Sensors - $40
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/527221_10151118980776754_1330060689_n.jpg

OEM SR20VE P11 Valvetrain (IN+EX Valves, Springs, Cams, Gears)
- 15,000 Miles
- PERFECT!
- Valves - SOLD!
Springs - $20
Retainers - $10
Camshafts - $40
Gears - SOLD!
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/419996_10150615750161754_2034185802_n.jpg

SR20DET AAC Valve
- PERFECT SHAPE
- $25
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/268390_10151117824486754_1518170587_n.jpg

S14 SR Valve Cover w/ Coil Pack Cover
- Perfect Shape
- $150
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/483292_10151117806246754_1759643063_n.jpg

stock KA24de airbox intake system and Filter is still clean (came from a 98' kouki)
- PERFECT SHAPE
- $40
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/395569_10150613036421754_1842248499_n.jpg

S13 Non-ABS Driveshaft - Pick up only
- Used
- $80
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/251844_10150996375441754_1255838261_n.jpg

S13 SR Transmision - Pick up only
- Roughly 30k miles
- PERFECT SHAPE
- $120
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/581233_10150834790411754_526896753_11628495_953830 84_n.jpg

S13 SR Bell Housing
- No cracks
- $30
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/564085_10151117824271754_656643891_n.jpg

SR20 Timing Chain guide
- Perfect Shape
- $8
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/208835_10151117803836754_1132037713_n.jpg

S13 SR Valve Cover Baffeling
- Great Shape
- $8
https://scontent-a-lga.xx.fbcdn.net/hphotos-prn2/205392_10151117824711754_230142896_n.jpg

SR20 Coilpack Gaskets
- NEW
- $1 each
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/306862_10151117804861754_635118492_n.jpg

S13 SR20 Intake Gasket
- PERFECT SHAPE
- $3
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc1/578087_10150996378901754_1024923681_n.jpg

S13 SR20 Valve Cover Gasket
- Perfect Shape
- $10
http://sphotos.xx.fbcdn.net/hphotos-ash3/179381_10150996377131754_633498064_n.jpg

Injector Gasket O-rings
- Perfect Shape
- $1 each
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/531730_10151117835861754_1774072589_n.jpg

SR20 Rear Main Seal
- New In Box
- $13
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/575117_10151600690261754_2113978335_n.jpg

(8) SR20 Hydraulic Lifters
- Perfect Shape
- $3 each
https://scontent-a-lga.xx.fbcdn.net/hphotos-ash2/482040_10151117834446754_1000631996_n.jpg

Megan Racing SR T3/T4 Exhaust Manifold
- NEVER USED
- $80
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/209001_10151600690071754_1741953076_n.jpg

SR OEM Exhaust Manifold
- Perfect Shape
- $35
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/558022_10151117809826754_1698690365_n.jpg

SR20det Exhaust Gaskets (t3, T4, Exhaust mani)
- Perfect Shape
- $10
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/387004_10151117825516754_1915179614_n.jpg

Crank Pulley Bolts (2)
-Perfect Shape
-$2
https://scontent-a-lga.xx.fbcdn.net/hphotos-ash2/430968_10150664145311754_1857571698_n.jpg

Transmission Mount Brackets
- Perfect Shape
- $8 each
http://sphotos.xx.fbcdn.net/hphotos-ash4/401191_10150664161831754_526896753_11067931_429516 216_n.jpg

Alternator Brackets
- Perfect Shape
- $13 each
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/432308_10150664167686754_1046513063_n.jpg

Knock Sensor (4)...one doesn't have a sub-harness
- Perfect Shape
-$18 each (13 for the one without the sub-harness)
http://sphotos.xx.fbcdn.net/hphotos-ash4/419805_10150664174196754_526896753_11067961_194880 5439_n.jpg

Godspeed Arm - $8
S13 Rear Links - $8 each
S13 Front Lower Control Arm - $20
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/527865_10150834796161754_526896753_11628506_861054 377_n.jpg

(2) o2 Sensor Simulator
- one was touched with dirty hands, then I put on gloves
- NEW IN BOX
- $25 (each)
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/599368_10151600690386754_955153327_n.jpg

[a-s-silvia]

text me 719-250-4468 want intake and oil pan can you send me more pics?

[bova17]

..................pm'd

[bova17]

Did you get the manifold shipped out yet?

[hardcorps135]

Is that a GREDDY oil pan? If so how much shipped to 96863?

[TheRealSy90]

It's not a greddy. How much for the s14 valve cover and cover shipped to 85364?

[buuuddhhaa]

Main seal to 77627


Sent from my iPad using Tapatalk

[bigturbo3]

You have a PM for the temp sensor housing

[RocketBUNNY]

Do you have some better pics of the intake you could post or pm me I may be interested in it cuz I should beable to fix the injector problem since I work in a welding/machine shop

[kouktexas]

Trasmisin brackets text9153299633

[600supersport]

and thennnnnnnn