aftermarket steering wheel/horn question

[blksylv]

Hi, I just had a quick question. I'm ordering a Works bell srs short hub for my s14 to use with my nardi classic wheel. I really haven't found too much info on whether I'll need a horn button with one or two contacts. I've seen a couple of people running a horn button with two contacts. I just wanted to confirm this since I really haven't seen anything concrete on this subject. I posted in the small questions thread a while ago and got no response. I currently have a single contact horn button in my possession btw. I apologize if this has been covered before. Thanks.

[fliprayzin240sx]

Most wheels I've seen is almost always single wire setup. You got the power wire and basically the horn button would just ground out for the horn to honk.

[derass]

I used this write-up to have a working horn, it even shows how to use a single wire horn button.

http://importnut.net/steeringswap.htm

[larryskinca]

Right, You got the power wire and basically the horn button would just ground out for the horn to honk.http://goo.gl/E0iu44

[blksylv]

cool thanks guys. i may just get a double contact horn to avoid having to rig it though lol.

[blksylv]

Just to provide an update. I got my horn to work fairly easily. My QR came with a plate with a tab for a ground. I ended up just running a wire from that and wrapped with around the metal hoop on my horn and horn worked like a charm.

Here's a pic for reference. Not my pic btw.

http://importnut.net/240pics/steering/hub09.JPG

[chato de shamrock]

What sort of quick release are you using. I just got my nardi this morning and tried it on my works bell QR but the horn button is as large as the works bell QR opening. I used gentle hand pressure to try and slide it in slug like I did with my current momo wheel but nardi's horn is obviously larger in diameter. I'm looking around for solutions both here and google search but it seems these horn/QR issues are limited to NRG quick release systems. I might end up creating a thread on here and risk getting flamed on if this has been covered and i missed the thread.

[blksylv]

I used a NRG 2.0 QR. My horn went into the opening without any issues. I think the works bell QR may have a ring on the inside that can be removed judging from the online pics(i could be wrong though). A similar ring was included with my NRG but I didn't need it. Its mainly for smaller horn buttons iirc.