Complete SR20 partout (aftermarket and stock)

[MeanS14]

S13 SR 20 block w/crank and ARP main studs $500
The block has been freshly hot tanked cleaned and honed by Arizona Speed and Marine

CP 86.5mm pistons (new) $500
Greddy head studs (new) $250
ACL main and rod bearings $80
Freddy intake manifoldw/ TB $250
Tubular exhaust manifold $100
Freshly powder coated valve cover(purple) $150
Freshly powder coated valve cover $150
(wrinkle black with red letters)
New head gasket $50
New clutch and pressure plate SOLD
Freshly resurface flywheel SOLD
Rocker arm stoppers $40


Stock Parts
100% complete head $300
100% complete transmission $200
SR blacktop finned head SOLD
-valves, springs, retainers, and keepers still installed

Coilpacks w/harness $120
Cam angle sensor $80
Upper oil pan $50
Lower oil pan $25
Crank pulley $30
Motor mount brackets $40
Alternator $60
Starter $60
Power steering pump w/bracket SOLD
Water pump $20
Timing chain kit $100
-Chain
-Both guides
-Tensioner
Oil pump/Front cover $80
Oil pickup tube $15
Rear main seal cover $20


http://i1305.photobucket.com/albums/s542/TFGbusiness/parts1_zps3018f6ce.jpg
http://i1305.photobucket.com/albums/s542/TFGbusiness/parts2_zps765aa3c0.jpg
http://i1305.photobucket.com/albums/s542/TFGbusiness/parts3_zps1584585f.jpg
http://i1305.photobucket.com/albums/s542/TFGbusiness/parts4_zps213d347c.jpg
http://i1305.photobucket.com/albums/s542/TFGbusiness/20140523_171257_zps0446c658.jpg
http://i1305.photobucket.com/albums/s542/TFGbusiness/20140523_162513_zps0835304b.jpg
http://i1305.photobucket.com/albums/s542/TFGbusiness/parts5_zpsc99dbebc.jpg

[huffandpuff00]

good looking VC!

[Edwin562]

Pm'ed you about the clutch...

Bump

[R2RO]

is the intake manifold a genuine greddy intake manifold or replica? Im interested.

[jds0032]

interested in the power steering pump and bracket. do the bolts come with it?

[MeanS14]

interested in the power steering pump and bracket. do the bolts come with it?

Yes, I can include the bolts

[TwistnItSideways]

how much for the exhaust manifold shipped to 74012?

[coupesallday!]

Acl main and rod bearings new?

[sr20time]

Compression on pistons?

[MeanS14]

Acl main and rod bearings new?

Main bearings were installed and the motor rotated by hand then pulled out. Rod bearings have never been installed

Compression on pistons?

9:1

[Davidna2fi]

What happened to the head, any damage to the valves?

[Nikzilla]

I need the flywheel inspection cover w/ hardware. It's in the upper oil pan where it meets the bellhousing.

[MeanS14]

What happened to the head, any damage to the valves?

The head is in great shape. The whole motor was in perfect shape, it was just pulled apart to do a full build but I never got around to finishing it

I need the flywheel inspection cover w/ hardware. It's in the upper oil pan where it meets the bellhousing.

I will look for it today

[MeanS14]

Bump!! Help me get rid of this stuff

[Nikzilla]

Can I take the flywheel inspection cover? I can see u have it in the pics.

Sent from my SCH-I545 using Tapatalk

[dreek93sr20]

Are the main bearings standard?

[MeanS14]

BUMP!!!

Still have a ton of parts im trying to get rid of