View Full Version : UT FS: S15 SPEC R 6MT Ball Bearing Turbo 14411-91F00 350hp
Okinawa Ryu
05-22-2014, 01:51 PM
S15 SILVIA SPEC R 6MT BALL BEARING TURBO
This turbo is the dual ball bearing 91F00. About 15k miles on it. Very clean. No bent blades, no leaks, no shaft play. Has cast divider wall for better flow. Really fast spool up with max hp rating of 350hp (similar to GT2871R).. Comes with stock water and oil lines (no oil return), actuator, exhaust manifold and exhaust gasket. $600
http://i1168.photobucket.com/albums/r494/Fujiparts/IMAG3090.jpg (http://s1168.photobucket.com/user/Fujiparts/media/IMAG3090.jpg.html)
http://i1168.photobucket.com/albums/r494/Fujiparts/IMAG3091.jpg (http://s1168.photobucket.com/user/Fujiparts/media/IMAG3091.jpg.html)
http://i1168.photobucket.com/albums/r494/Fujiparts/IMAG3093.jpg (http://s1168.photobucket.com/user/Fujiparts/media/IMAG3093.jpg.html)
Dboyizmlg
05-22-2014, 02:42 PM
This thing is NOT similar to the GT2871r!!!
The compressor housing and and exhaust housing is same exact design depending on which gt2871r people would choose.
The GT2560(Dbb 91F00), does not come close to the Gt2871.
Big difference in Hp!
Dont give mis information to people.
Okinawa Ryu
05-22-2014, 05:34 PM
I said similar not the same. Calm down man. Dont get your panties in a bunch. Similar in response and spool up. Still max hp rating is 350hp. 2871 is about 380. People arent stupid, they can research what I say. So stop crying.
Dboyizmlg
05-22-2014, 06:09 PM
They sure can do some reaserch but I simply posted a comment to help aid any one that might need some REAL insight.
GLWS OP
Okinawa Ryu
05-23-2014, 01:40 AM
Whatever girl. They got all the information they needed and if they needed more they could always pm or look it up. You didnt even refute anything I said about the characteristics in power or response. You actually made yourself look even more retarded than what you already are (which is quite hard to since you are already at the worst stage) by saying the exhaust housings are the same as the 2871. That's because these turbos are closer related (similar) to the gt28 series moreso than the older gt25 series, dummie. Do us all a favor and shut up and stay in your corner of cyber space. You're one of those fart turds that just likes to troll posts and talk to hear himself speak. I'm calling you out in public because instead of talking to me personally you tried to call me out, with very invalid points, on my for sale thread. If any of us wanted to hear from a butt crack, we'd ask you. Until then stay off my threads... Btw, I dont need glws from you. I have been selling parts since I lived in japan (military..i used to destroy sissy boys like you).. I know very well what I sell....
Now, that I've taken out the trash, if there is anyone interested, feel free to post here or pm me..... One person asked if this bolts on to other sr's. Yes, it is a direct bolt on plug and play for s14's. It is a bolt on for S13 sr's but I suggest using the oil line from the S15 than the stock S13 line because it restricts the oil flow (ball bearing turbos dont do well with excess oil flow) or buy the braided lines with restrictor. Also the water return line for the s13 goes to the back of the engine but can be taken off the t25 and used on this t28. Compressor inlet and outlet pipes are angled different on the s13's but can be used on the t28 with or without clocking plated. (I used without clocking plates in japan and still had no issues)
venom2034
05-24-2014, 08:30 AM
definitely not 350 hp.
No 240.. No id
05-24-2014, 08:41 AM
I have seen a 330 hp setup with this turbo. Those are some great turbos, i don't see why they wont hold 350. Bump for good deal.
Okinawa Ryu
05-24-2014, 09:25 AM
I have seen a 330 hp setup with this turbo. Those are some great turbos, i don't see why they wont hold 350. Bump for good deal.
Thanks man. I lived in Japan for 10 years and tuned silvias over there and have seen the same. I saw guys with a pretty good tune getting 350 hp from these. 264 cams, Z32 mafs, 550cc (or bigger) injectors, gtr fuel pump, aftermarket air intake and exhaust, metal head gasket and boost controller. As a matter of fact, Yoshio Factory has a 180SX that makes 350hp using this stock S15 turbo. Oka San (the owner of Yoshio) loves the 91F00.
Dboyizmlg
05-25-2014, 12:35 AM
The more you post the worse you make it for your self.
I didn't mean to offend you, but you took it the wrong way.
Your above reply is childish!
BTW I would like to see a few Dyno sheets that with that turbo at 350hp....
Have a good day
i want to see these dyno sheets too.
why would you even run these at 350whp... that's maxing the crap out of the turbo, every time you were in full boost.
CaliforniaMayhem
05-25-2014, 02:16 AM
If you want to see the dyno sheets go search it up guys! Who gives a sh*t about the rating.
Point is he has a clean turbo that's a great upgrade on a lightly mod'ed sr.
Glws
Sent from my XT907 using Tapatalk
Okinawa Ryu
05-25-2014, 10:26 PM
The more you post the worse you make it for your self.
I didn't mean to offend you, but you took it the wrong way.
Your above reply is childish!
BTW I would like to see a few Dyno sheets that with that turbo at 350hp....
Have a good day
You were condescending and arrogant. Sometimes its not what you say but how you say it. Dont get butt hurt now that I called you out. You were being a penis. But I guess you are what you eat. Now everytime I see you on here its war. So best you stay out of my way. And as snoop dog would say...Dyno deez nutz
venom2034
05-26-2014, 06:47 PM
You were condescending and arrogant. Sometimes its not what you say but how you say it. Dont get butt hurt now that I called you out. You were being a penis. But I guess you are what you eat. Now everytime I see you on here its war. So best you stay out of my way. And as snoop dog would say...Dyno deez nutz
lol wut.......
Sonnyman
05-26-2014, 07:02 PM
Just so you guys know he never mentioned 350"whp" just hp.
350hp at the crank is about 300whp.
fufanu180
05-29-2014, 06:25 PM
Pm'd man.
Sent from my iPhone using Tapatalk
EdmondsS13
06-24-2014, 12:59 AM
Still available? PM'd
sftgjsyj
06-24-2014, 04:41 AM
They sure can do some reaserch but I simply posted a comment to help aid any one that might need some REAL insight. http://finanziellede.de/hu6g.jpg
TwoForDeh
06-24-2014, 08:30 AM
You were being a penis. /endthread
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.