kongoboi8
05-20-2014, 02:08 PM
For anyone who is curious about a 15x9 +0 offset on springs and coilover or clearence.
Rim/Wheels: Rota grid v (White, all 15x9+0)
I'll try to make this short.
My car with Se wheel, sitting on stock shock, and lower tein springs.
71199
71200
71201
Looks pretty good with stock wheels but after installing the grid v, the look change, I thought it was funnying looking.
Tein spings:
71205
How the car and Fitment looks.
71202
71203
71204
This look is with no camber, but tire size is 195/60/r15 on a 15x9+0. I know, what a fat chunk of meat on the wheel.
After that, I installed the coilover kit I bought, not the best but it works.
Godspeed coilover, mono tubes, They ride good, I never ride in any other brand so I can't give you much about it, but it's smooth and it works.
71206
After I install these, the ride look a bit better, and it's still without camber, just natural butterfly.
71207
71208
71209
71210
71211
71212
Overall, I didn't problem with them other then getting smaller lug nut because the stock didn't fit. brake all clears, but I have to roll the fender, I did it with rubber hammer and a heat gun that I can use different heat temp. I did have to pull up the harness by the driver side fender because it was burning. I just tie it with the engine pop up hood cable.
with this high, my pipe would strach on driverway, and I can't go through small speed bumpers but I can clear the big speed bumps, sometime. But the wheels fits but it's better if you get coilover on it, size 15 looks better low then kinda low. I set my coilover rear stiff and front kinda stiff so I don't rub my fenders.
There it is, anyone that wanna see a lot of photo of how it sits. Sorry if this didn't help you slove your problem. but it's worth a try.
Rim/Wheels: Rota grid v (White, all 15x9+0)
I'll try to make this short.
My car with Se wheel, sitting on stock shock, and lower tein springs.
71199
71200
71201
Looks pretty good with stock wheels but after installing the grid v, the look change, I thought it was funnying looking.
Tein spings:
71205
How the car and Fitment looks.
71202
71203
71204
This look is with no camber, but tire size is 195/60/r15 on a 15x9+0. I know, what a fat chunk of meat on the wheel.
After that, I installed the coilover kit I bought, not the best but it works.
Godspeed coilover, mono tubes, They ride good, I never ride in any other brand so I can't give you much about it, but it's smooth and it works.
71206
After I install these, the ride look a bit better, and it's still without camber, just natural butterfly.
71207
71208
71209
71210
71211
71212
Overall, I didn't problem with them other then getting smaller lug nut because the stock didn't fit. brake all clears, but I have to roll the fender, I did it with rubber hammer and a heat gun that I can use different heat temp. I did have to pull up the harness by the driver side fender because it was burning. I just tie it with the engine pop up hood cable.
with this high, my pipe would strach on driverway, and I can't go through small speed bumpers but I can clear the big speed bumps, sometime. But the wheels fits but it's better if you get coilover on it, size 15 looks better low then kinda low. I set my coilover rear stiff and front kinda stiff so I don't rub my fenders.
There it is, anyone that wanna see a lot of photo of how it sits. Sorry if this didn't help you slove your problem. but it's worth a try.