PDA

View Full Version : 1989 240sx coupe shell w dohc motor (Olympia, WA)


95civicEX
06-23-2004, 05:42 PM
I was mid process of doing a sohc to dohc swap on this car, the ka24e is long gone, however I ran out of time and energy and because I needed a running vehicle I bought a 1993 240sx and need to get rid of this because I may be moving soon. I have nearly all the parts required for the swap, the parts missing are as follows:

battery, mafs, throttle cable, power steering lines, ignitor chip.

The engine is from a 1996 240sx, I have replaced the headgasket, and am finishing up putting it back together, I have an obdI intake manifold including the throttle body that can be put on it as well. I have the ecu, wiring harness and various other obdI parts to make the swap easier.

The engine/tranny combo also includes a spec stage 2 clutch.

The car is silver, the paint is good except for a 1.5 inch by .5 inch section just above the passenger side mirror where it has peeled away. The car currently has a silvia front end on it, I am willing to sell it with the front, but at a cost increase of $1000

The car also has a full interior (swapped from the 1993) (minus a trunk mat and glove box door - I can include one with it, but it will not have the fabric covering) there is a tear in the driver's side carpeting, but all the seats are good with no tears. The car also has a viper alarm, cost something llike $200 a couple of years ago, with two remotes, keyless entry. this vehicle also has power locks, windows, mirrors, and the ac blew cold before the headgasket blew on the old motor, the ac compressor will require a custom mounting bracket to be made to work with the new motor.

Additional recently replaced parts include a radiator with less than 6000 miles on it, new brake pads and rotors in spring of 2003 (car was not driven for a year between march 2003 and 2004 so these are virtually unused)

I am asking $1000 for the total car/engine package, $2000 with the silvia front, otherwise it will come with a black 1993 240sx front end.

pictures of the car with my previous modifications can be seen here: http://www.amackie.com/240sx/240sx.html

I will take new pictures as soon as I get a chance.

I am in Olympia, WA just off exit 114 on I-5, I can be reached at [email protected] or pm me here if you have any questions. I will aid in the delivery of the car if I can, but I do not have any equipment to tow it.

here are the pictures:

the color is 2002 subaru platinum silver
http://www.amackie.com/sale/forsale03.JPG

the engine in it's current state, parts to get it back together should be here within a couple of days -
http://www.amackie.com/sale/forsale05.JPG

engine bay/silvia front
http://www.amackie.com/sale/forsale06.JPG

tranny and other parts
http://www.amackie.com/sale/forsale12.JPG

chipped paint (I forgot exactly how big it was when I posted before, it's about 2-2.5 square inches total, but in three small parts on the same section of the car -
http://www.amackie.com/sale/forsale10.JPG

here are all the pictures I just took:

http://www.amackie.com/sale/forsale01.JPG
http://www.amackie.com/sale/forsale02.JPG
http://www.amackie.com/sale/forsale03.JPG
http://www.amackie.com/sale/forsale04.JPG
http://www.amackie.com/sale/forsale05.JPG
http://www.amackie.com/sale/forsale06.JPG
http://www.amackie.com/sale/forsale07.JPG
http://www.amackie.com/sale/forsale08.JPG
http://www.amackie.com/sale/forsale09.JPG
http://www.amackie.com/sale/forsale10.JPG
http://www.amackie.com/sale/forsale11.JPG
http://www.amackie.com/sale/forsale12.JPG
http://www.amackie.com/sale/forsale13.JPG
http://www.amackie.com/sale/forsale14.JPG

bobafett
07-12-2004, 11:28 AM
im possibly interested... 1000 without the jdm front end? im in vancouver washington... so i may be able to come to see the car...

is the car gonna be sold with the engine/tranny installed or not?

95civicEX
10-14-2004, 12:36 AM
the car sold months ago, anyone reading this please stop emailing/ instant messaging me with inquiries.