S13-Sr20 clutch bleeding issue

[lourens13]

Replaced the clutch over the winter, go to start it up and the pedal has no feel.

By passed the clutch dampener that comes stock on 240sx. Replaced the slave cylinder, bled at the line out of the master cylinder, bled at the bleeder valve on the slave cylinder. Used a brake bleeder vacuum to suck air out.

Cant get a full feel out of the clutch pedal. Ideas?

[Mikester]

I tried bleeding with a mity vac once... didn't work so well. No substitute for a 2-person bleed. Also, check your pedal and clutch MC armature adjustments... Sometimes, with a different clutchm, they require tweaking.