PDA

View Full Version : CA 1UZFE adapter plate

Nissan_Alex
05-09-2014, 08:54 PM
SOLD SOLD SOLD for $290.00



I have a 1uzfe Adapter plate I am not going to be using, it will mate
to
Z33 6-speed gearbox
Sr20det Transmission
ka24de Transmission
http://i.imgur.com/auScIF3.jpg?1
$300.00
picked up

424-241-2078
located in Redondo Beach
satal95
05-10-2014, 06:53 AM
I thought that's how much they are brand new?
Nissan_Alex
05-10-2014, 10:42 AM
it is brand new? I just bolted it to the engine to show it
also shipping from florida is about $50 so it is a bit more if you order it for people on the west coast
satal95
05-10-2014, 05:34 PM
Once installed it becomes used
satal95
05-11-2014, 07:34 PM
Either way I'll give you $275 shipped for it
Nissan_Alex
05-17-2014, 03:04 PM
Still for sale can do $280 + shipping which was the cost of the plate to begin with, good luck finding one cheaper on the west coast.
satal95
05-17-2014, 06:17 PM
Well my offer still stands at $275 shipped
Sergio180sx
05-17-2014, 09:58 PM
I can do $250 Picked up
Nissan_Alex
05-18-2014, 07:01 PM
ok for everyone giving offers this is not used I had this manufactured, it is new as in I picked it up from the machine shop last week.

I will not be taking less than $280 that is the final price, not including shipping.

If you dont like the price please don't buy it than, XATracing makes a great plate as well as Collinsracing.. keep in mind you will have to pay shipping so Good luck!
satal95
05-18-2014, 10:31 PM
Then you should of kept it in the box and not install it cause once installed it became used again I'll offer you $275 shipped
Sergio180sx
05-19-2014, 12:21 AM
Then you should of kept it in the box and not install it cause once installed it became used again I'll offer you $275 shipped

Agreed, if he don't take your offer then he don't want to sell it, i guess he thinks he can get what he paid for it or make some on top when it's used now.
Nissan_Alex
05-19-2014, 12:33 AM
Let me say again this adapter did not come in a box, I made it.......
as in i drew out the plans on what it would take to make it work and had a machine shop manufacture it, the machine shop does not sell you the plate inside a pretty box, and the color in the picture is what steel looks like straight from the steel shop. I could care less if you dont agree with my price, I will just use it on another conversion I will be doing in a few weeks instead of having another one made.

Thank you for the negative comments!