supersayianjim
05-08-2014, 09:17 AM
so sunday I got fucked royaly.. just finished a successful and surprising dyno run. got called out to race and accepted the challenge.
so about 70mph in on a un busy road my hood comes up and smacks the windshield and hood. I forgot that my main hood latch wasn't latched and the secondary gave out at the wind/speed.
so yes I got fucked in this deal, but luckily(as if) the windshield didn't break, just developed this slow spider crack that gets longer by the day.
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/crackthatisspreading_zpse9671a4f.jpg
heres what the hood looked like after some massaging and 1 replacement latch(on left right bolt is seized and haven't been able to remove yet) so the right hinge is bent but still working.
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/hoodculprit_zpsc55aabb7.jpg
so I need a new hood, the worst of my problems right?? wrong, apparently the fucker didn't break my windshield thinking in part because I hacked up the under supports. but it smacked my roof kinda hard.
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofding1_zpsb448fe1e.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings2_zpsdc80a139.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings3_zps94a32034.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings4_zpsb77380ad.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings5_zps117d6f97.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings10_zpsfd807cae.jpg
well no big deal right?? so I go to a reputable dent repair place and I was floored as the fellow told me I need a whole new roof. he said I could repair this one, but it could get hot, and pop off whatever plastic/bondo is used to make it smooth.
he said I would need to cut off the old one and weld on a new roof. I asked just for the labor and he said 1k before paint. :duh:
anyone have similar roof issues before? iam thinking iam going to try and not replace this first and see what happens.
it is "oil canning" in one spot in the rear left part. he said the metal is stretched that's why this is happening am I that real fuckd??
I took some high def pics for better clarity.
so about 70mph in on a un busy road my hood comes up and smacks the windshield and hood. I forgot that my main hood latch wasn't latched and the secondary gave out at the wind/speed.
so yes I got fucked in this deal, but luckily(as if) the windshield didn't break, just developed this slow spider crack that gets longer by the day.
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/crackthatisspreading_zpse9671a4f.jpg
heres what the hood looked like after some massaging and 1 replacement latch(on left right bolt is seized and haven't been able to remove yet) so the right hinge is bent but still working.
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/hoodculprit_zpsc55aabb7.jpg
so I need a new hood, the worst of my problems right?? wrong, apparently the fucker didn't break my windshield thinking in part because I hacked up the under supports. but it smacked my roof kinda hard.
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofding1_zpsb448fe1e.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings2_zpsdc80a139.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings3_zps94a32034.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings4_zpsb77380ad.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings5_zps117d6f97.jpg
http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/roofdings10_zpsfd807cae.jpg
well no big deal right?? so I go to a reputable dent repair place and I was floored as the fellow told me I need a whole new roof. he said I could repair this one, but it could get hot, and pop off whatever plastic/bondo is used to make it smooth.
he said I would need to cut off the old one and weld on a new roof. I asked just for the labor and he said 1k before paint. :duh:
anyone have similar roof issues before? iam thinking iam going to try and not replace this first and see what happens.
it is "oil canning" in one spot in the rear left part. he said the metal is stretched that's why this is happening am I that real fuckd??
I took some high def pics for better clarity.