FS: s13 sr20det partout or full swap $$$1000

[g0dspeed_mat]

everything is being sold as is no warranties or gaurantees

wiring harness for s13 sr20 into s14 chassis (not a wiring specialties harness, looks kinda haggard from previous owner) - SOLD
ECU (the sticker was pealed off the ecu so im not sure on the code) - sold
cam angle sensor - sold
370cc injectors on s13 sr rail - injectors sold

flywheel(will need resurface) + bolts +
clutch(stock clutch still shows life) - 80

alternator x2 - 80 for newer one 60 for older one
alternator bracket - sold
solid motor mounts - 40
regular motor mounts - sold

coil pack harness - sold

complete head - sold
short block (willing to part out) - sold
also have spare parts head missing some valves and rocker arms and lifters and shims - 80
upper + lower pan - 50
crank pulley - 40
rod + piston - 15 each
transmission - 130 (slips out of 5th when you let off throttle)

intake manifold - 25

exhaust mani - 30
s13 sr20det maf - sold
ps pump +bracket - 90
ps pump resevoir + lines- 35
AC compressor - 40 shipped

http://i55.photobucket.com/albums/g138/matrad/temporary_zps4694f1a0.jpg (http://s55.photobucket.com/user/matrad/media/temporary_zps4694f1a0.jpg.html)

http://i55.photobucket.com/albums/g138/matrad/temporary_zps0111915b.jpg (http://s55.photobucket.com/user/matrad/media/temporary_zps0111915b.jpg.html)



http://i55.photobucket.com/albums/g138/matrad/temporary_zps15ab0328.jpg (http://s55.photobucket.com/user/matrad/media/temporary_zps15ab0328.jpg.html)

http://i55.photobucket.com/albums/g138/matrad/temporary_zps4e256826.jpg (http://s55.photobucket.com/user/matrad/media/temporary_zps4e256826.jpg.html)

http://i55.photobucket.com/albums/g138/matrad/temporary_zps123f97c1.jpg (http://s55.photobucket.com/user/matrad/media/temporary_zps123f97c1.jpg.html)

http://i55.photobucket.com/albums/g138/matrad/temporary_zpsbd9dc1e6.jpg (http://s55.photobucket.com/user/matrad/media/temporary_zpsbd9dc1e6.jpg.html)
that broom is a legit jdm broom -$17

[g0dspeed_mat]

well let the partout begin. stuff already sold

[g0dspeed_mat]

The more u buy the cheaper it is

[drumnbasslvr]

ok I'll bite, I see realistic prices here. I want all the intake manifold brackets, especially the large Y shaped one, I want the metal coolant pipe assembly that's bolted to the block beneath the intake manifold, regular motor mounts pair, valve cover, short harness for the temperature switches, 4 plastic fuel rail spacers, bolts for every said item and bolts for water pump. pm me for paypal and I had in mind for these items 160 shipped because the mailman is greedy these days.

[g0dspeed_mat]

Pm has been sent

[Yebra831]

Do u still have the ecu?
Was the motor a s13 sr20det red top?

[240Fubs]

interested in the alternator. pmed

[g0dspeed_mat]

Still have the Ecu, I just know it's a s13 not sure on the code or it's a blacktop or red top
If anyone knows how to tell by opening it we can figure it out

[drumnbasslvr]

money sent for items and free bump sir.

62 and E5 ecus are identical and interchangeable, the maps are very close together, hardly noticeable, unless you live in wot all day.

differences found in nistune if you must know

redtop rev limit 7600 vs black top 7400
feedback switch redtop has bit 2 unselected where blacktop does, unknown function
last two columns in fuel and timing maps are with blacktop running way richer in the wot area near 8 afr and redtop near 9, timing slightly more aggressive for blacktop too. roughly 3 degrees difference between the two in wot area.

[g0dspeed_mat]

sold some stuff.
also have s14 sr20 parts for sale

[wussmonster]

Speed sensor shipped to 97123?

Sent from my XT603 using Tapatalk 2

[degh]

Do you have the igniter chip?

[dallasc]

still have the maf, powersteering pump and bracket?

[RedS-14]

Do you by any chance still have alt. bracket, and i also need the three bolts that bolt the Thermostat housing to the block.

[g0dspeed_mat]

No igniter chip
But have everything else

[g0dspeed_mat]

alternator bracket is pending. still have both alternators

[g0dspeed_mat]

obviously dont have it all together to sell for 1000
someone give me an offer on the rest

rods and pistons - 80

[oaksman513]

Sent you a pm

[cotbu]

Power steering pump and bracket shipped to 19706
Please thanks

Sent from my Highly Tuned Galaxy S3.4!!!

[g0dspeed_mat]

pm has been sent

[g0dspeed_mat]

updated prices. the more you buy the cheaper it will be

[TheRepoMan]

Do you still have the maf and pig tails?

[g0dspeed_mat]

That has been sold n shipped

[g0dspeed_mat]

i brought some stuff with me to formulA D in miami. let me know what what your looking for

[buffsr20]

Looking for a ka24de power steering pump?

[Nikzilla]

Need a flywheel inspection cover. It's in the back of the upper oil pan where it meets the bellhousing.

[g0dspeed_mat]

PM has been sent

need ka24 power steering pump? i have a PS pump you will just have to use ka24 brackets

[g0dspeed_mat]

The injectors are gone but I have 2 rails.

[g0dspeed_mat]

List has been updated
S13 sr20 head anyone need one?

[crschneiderwrx]

I'm in Orlando, interested in ps pump and bracket if still available lmk.

[g0dspeed_mat]

you got it
lets figure it out

[S14 Ender]

Would you do 200 for the SR head?

[g0dspeed_mat]

roger that

[g0dspeed_mat]

Sr20 head sold

[S14tyger]

Text me 7046987058 if you still have the motor mounts!

[dreimers]

Need the timing chain guide. It is between the cams held in by two bolts, oil baffle that is on the exhaust side cam and black valve cover shipped to 60502?

[g0dspeed_mat]

Message sent

[g0dspeed_mat]

updated prices
someone gives me $300 they can have the rest ill even include a blown turbo ;)

[dnice78]

I'll take 1 piston/rod combo. How much shipped to 58201?

[g0dspeed_mat]

coming right up

[dreimers]

Pmd sent to you

[MikeySand]

Still have a crank pulley available?

[g0dspeed_mat]

crank pulley and solid motor mounts still available

[shabbas]

Interested in the rods and Pistons, let me know if you still have them and if they have anything wrong with them


Sent from my iPhone using Tapatalk