How do you bypass neutral saftey switch - SR20

[hemmylane52]

My harness is all cut up and i basically want to wire this so it will start no matter what gear its in. Standard transmission. I believe the plug on the trans has a white and black/yellow wire coming from it. Its cut from there, so if someone could guide me through these connections please??

[e1_griego]

You need to jump the clutch interlock relay, or the clutch switch. The relay is by the battery, the switch is on the pedal.

[brndck]

Yes it's a switch on the clutch pedal. Two wires go to it. Basically you cut the two tires off and attach them together. Done. Now vehicle will start without pushing the clutch pedal but be careful because it will now start in gear as well.

[zurud]

neutral switch and clutch start switch are different. Neutral switch is on tranny. You could start the car without wiring it. I don't really know what it does really. It goes to the ecu. Green wire with orange stripe. Clutch start switch is on clutch pedal. You need to hook it that to start the car .

[hemmylane52]

I got it down, thanks everyone