integrabois1991
05-02-2014, 08:12 PM
Located in Garland Tx.
Turbo XS bov $80
Brand new sealed Fuel Injector: JECS/Fiveo 18114550, Nissan/JECS, Phase II Fuel Injectors: $200.00
18114550, Nissan / JECS, Phase II Fuel Injectors:
USE THIS FUEL INJECTOR FOR A HIGHLY MODIFIED ENGINE - CAN BE INSTALLED WITH THE OE ECU.
High-performance, Japanese Electronics Corp (JECS) fuel injectors - Custom Manufactured to flow 550cc - Guaranteed Matched Sets.
Custom Fiveo Adapter Kit.
injectors are custom-manufactured from brand new Japanese-made "base" fuel injectors in large-quantity batches to achieve the highest quality product. The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then hermetically-sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.
FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintainance, but not essential, for stainless steel based fuel injectors.
As part of our quality control, each injector has been marked/inscribbed by our technician with an individual control number and is part of a unique flow-matched set.
This injector set is for modified engines with high horsepower. See Chart below.
This injector will fit Nissan SR20DE, KA24DE, VG30DE, VE30DE, VQ30DE.
Will also fit 1990-1993 300ZX with ADAPTER KIT.
Injector Body Design: Metal and composite plastic
Flow rates: (These are true and tested flow rates of this fuel injector.
We use Heptane as our testing agent).
550-560 cc/min at 43.5 psi (3.0 bar)
590-600 cc/min at 50.8 psi (3.5 bar)
640-650 cc/min at 58.0 psi (4.0 bar)
1990-99 Nissan SR20DE, KA24DE, VG30DE, VG30DETT, VE30DE, VQ30DE, VH45.
Turbo XS bov $80
Brand new sealed Fuel Injector: JECS/Fiveo 18114550, Nissan/JECS, Phase II Fuel Injectors: $200.00
18114550, Nissan / JECS, Phase II Fuel Injectors:
USE THIS FUEL INJECTOR FOR A HIGHLY MODIFIED ENGINE - CAN BE INSTALLED WITH THE OE ECU.
High-performance, Japanese Electronics Corp (JECS) fuel injectors - Custom Manufactured to flow 550cc - Guaranteed Matched Sets.
Custom Fiveo Adapter Kit.
injectors are custom-manufactured from brand new Japanese-made "base" fuel injectors in large-quantity batches to achieve the highest quality product. The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then hermetically-sealed and placed in matched sets ready for shipping.
You don't get this kind of technology from an OE injector.
FLOW CHART: Each set is sold with a complete flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
SPECIAL NOTE TO OUR E85 USERS:
Ethanol tends to "dry" the orifices. Customers should be made aware that this can be a problem with some fuel injectors. And may cause a "sticking" problem. It is suggested that a tank of 91-98 octane gasoline be run to every 5 or 6 tanks of Ethanol to re-lube not only the fuel injectors, but the entire fuel component system. This is also considered to be good maintainance, but not essential, for stainless steel based fuel injectors.
As part of our quality control, each injector has been marked/inscribbed by our technician with an individual control number and is part of a unique flow-matched set.
This injector set is for modified engines with high horsepower. See Chart below.
This injector will fit Nissan SR20DE, KA24DE, VG30DE, VE30DE, VQ30DE.
Will also fit 1990-1993 300ZX with ADAPTER KIT.
Injector Body Design: Metal and composite plastic
Flow rates: (These are true and tested flow rates of this fuel injector.
We use Heptane as our testing agent).
550-560 cc/min at 43.5 psi (3.0 bar)
590-600 cc/min at 50.8 psi (3.5 bar)
640-650 cc/min at 58.0 psi (4.0 bar)
1990-99 Nissan SR20DE, KA24DE, VG30DE, VG30DETT, VE30DE, VQ30DE, VH45.