PDA

View Full Version : CA FS: GT2871R 0.64, PBM HMIC, Koyo N Flow, Trust Downpipe, Top Feed Rail, Walboro 255


SofaKingFast
04-30-2014, 03:28 PM
Hey Guys,

I'm upgrading setups so these parts are for sale. All parts are OBO and yes I'm willing to ship at buyers expense. Parts are located in City of Industry in Southern California. Please PM me for fastest response.

https://lh4.googleusercontent.com/-6KiargXnsV0/U2Fqa0ERh2I/AAAAAAAAGC0/BGs7JHAtiiU/w1127-h842-no/195088_10150162489088210_2764477_o.jpg
Please note: This image was taken when the turbo was bought brand new
https://lh5.googleusercontent.com/bX4ApRcx3G2zSfUhwbmDGugLtNxmYfx4gZwOy9BiCqY=w640-h480-no
https://lh3.googleusercontent.com/-1wHaLBQ8xUQ/U2P3lxfVh5I/AAAAAAAAGDg/91IiCgKQyOE/w640-h480-no/photo+3+%25281%2529.JPG
https://lh3.googleusercontent.com/-WIbzoZhuiAs/U2P3mR9t8zI/AAAAAAAAGEI/2QCsEYOqkmw/w640-h480-no/photo+4+%25281%2529.JPG
https://lh3.googleusercontent.com/-d4jS4jKCiUM/U2P3miZyJfI/AAAAAAAAGDw/Zoy4QdlNPn0/w640-h480-no/photo+5.JPG

1.) Used GT2871R (0.64 model). Bought brand new from FRSport and has only seen 14 psi max boost over 4 events. Wastegate arm is tacked to run an external, but you can grind it free if you prefer to run the internal gate. No shaft play and spins perfectly. Asking $900 OBO

https://lh5.googleusercontent.com/-Jz_U8h8lB_s/U2Fqa8djBDI/AAAAAAAAGCw/zBncTaZwN5s/w648-h484-no/39578_492887158209_1490775_n.jpg

2.) PBM HMIC w/ piping for Greddy intake manifold, + Greddy Type R BOV. Prefer not to separate. Need to run a bigger core with the new setup so this is for sale, otherwise I would keep it (response is amazing). Core was dented a little during install but doesn't leak and held 14 psi with no issues. Cold pipe has fitting for IAT sensor, with BOV welded to cold side. BOV will include recirculation fitting. Asking $450 OBO

https://lh5.googleusercontent.com/-K5YYpQfTeg4/UyC87libeeI/AAAAAAAAF9o/3UjdgZ0QKVI/w640-h480-no/photo+1.JPG

3.) Koyo N Flow. Came off my S14 with S13 SR. Some bent fins when removed from the car but doesn't affect cooling, and doesn't leak. I upgraded to a Griffin so this is for sale. SOLD

https://lh4.googleusercontent.com/-44_VKdLdZQw/UL-ywoUywkI/AAAAAAAAEoE/D9xzW3ZF4Jc/w1573-h885-no/2012-12-05_12-40-24_560.jpg

4.) CS Top Feed Fuel Rail. Brand new, ended up going sidefeed. Blue anodized finish, comes with everything needed for install. SOLD!

5.) Walboro 255. Came off my S14, worked perfectly but I'm upgrading. Asking $50 OBO

6.) Greddy/Trust downpipe. Came off my S14 w/ S13 SR. Typical dents/scratches from being lowered, but no holes/leaks. SOLD

7.) CS Test pipe. Used, also came off my S14 w/ S13 SR. Asking $40 OBO

8.) Megan turbo elbow. Used, came off the 2871R. Asking $90 OBO

Here's some other misc stuff I have lying around in case your tax refund is burning a hole in your wallet:

S14 open diff w/ axles
S14 driver door (shell only)
S14 steering wheel w/ airbag
S14 aftermarket rear bumper
Tamron 10-22mm wide angle lens for Canon EF
AE86 FSM (OEM)
Authentic TTE lip for 2nd Gen GS300
NA Miata Ebay roll bar

Thanks for looking!

Ryan

SofaKingFast
05-02-2014, 01:50 PM
Fuel rail is sold. Radiator is pending local pick up today (5/2). Also I updated pictures of how the turbo currently sits. Offer up, need to fund my new project!

Ryan

SofaKingFast
05-05-2014, 02:30 PM
Monday bump!

genecan
05-06-2014, 09:28 AM
May I get a picture of exactly what is welded on the control arm?

EvilEgg13
05-07-2014, 07:40 AM
If willing to separate BOV let me know

TheRealSy90
05-07-2014, 08:08 AM
How much for the PBM HMIC setup (everything) shipped to 85364?

SofaKingFast
05-07-2014, 03:38 PM
70576

Here's a pic of the arm and the weld.

For the BOV, I would consider selling it separate if I can get a buyer for the rest.


Sent from my iPhone using Tapatalk

SofaKingFast
05-09-2014, 06:55 PM
Weekend bump, turbo still for sale guys!


Sent from my iPhone using Tapatalk

XAlliedYouthX
05-15-2014, 06:16 PM
Pictures of the HMIC dent and piping, please.


Sent from my iPhone using Tapatalk 2

Adrift
05-15-2014, 08:57 PM
Pic of greddy downpipe

Sent from my SAMSUNG-SM-N900A using Tapatalk

SofaKingFast
05-16-2014, 12:08 AM
Ask and you shall receive:

PBM HMIC (tapped for AEM IAT sensor. Will include nipple installed in coupler for wastegate actuator).
https://lh5.googleusercontent.com/-UcLgvhLXhuw/U3WphAVEmtI/AAAAAAAAGFc/Y--Fasj4Nko/w640-h480-no/photo+1.JPG
https://lh5.googleusercontent.com/-3HiUW3nZ3Mo/U3WphCrMbcI/AAAAAAAAGFk/-qvpyfRHXao/w640-h480-no/photo+2.JPG
https://lh3.googleusercontent.com/-pRed3ivvWV4/U3WphO1SdoI/AAAAAAAAGFU/iC_WRDnsyBc/w640-h480-no/photo+3.JPG
https://lh3.googleusercontent.com/-HTk8XIml2Ag/U3WpjgWOv9I/AAAAAAAAGFs/vssOEWmNJuc/w640-h480-no/photo+4.JPG
https://lh3.googleusercontent.com/-L5IFx46W8vc/U3WpiIKYMJI/AAAAAAAAGFg/x7IOzkdm8cM/w640-h480-no/photo+5.JPG

Trust Downpipe
https://lh4.googleusercontent.com/--eKt5BBKVkQ/U3Wpp8ecliI/AAAAAAAAGF4/pLLW6tM3Ph0/w640-h480-no/photo+2+%25281%2529.JPG
https://lh3.googleusercontent.com/-nWO9_l9ZuJ8/U3Wpp7tTb1I/AAAAAAAAGF8/oagF5Exna1s/w640-h480-no/photo+1+%25283%2529.JPG

eDmSiL80
05-16-2014, 09:10 AM
Argh. Do want mid-mount haha. GLWS sir.

SofaKingFast
05-20-2014, 01:44 PM
Trust downpipe has been sold! I updated the original post so anything still listed is available. Thanks for looking!

Adrift
05-30-2014, 02:10 PM
Downpipe received. Bump for you sir.

Sent from my SAMSUNG-SM-N900A using Tapatalk

cloudstruck
06-12-2014, 06:00 AM
still have the hmic?

TheRealSy90
06-12-2014, 07:16 AM
Is the hmic s14 specific? Or do they work on both s13 and s14? I've got an s13 with s13 sr and greddy style manifold.

buuuddhhaa
09-18-2014, 08:01 PM
750 for 2871r?

Dboyizmlg
09-18-2014, 10:34 PM
Sofaking!!!
I needed you a week ago for that turbo!

I just ordered one 2 days ago bran new one!! I could of saved some cash. : (

buuuddhhaa
09-24-2014, 06:07 AM
Hey Guys,

I'm upgrading setups so these parts are for sale. All parts are OBO and yes I'm willing to ship at buyers expense. Parts are located in City of Industry in Southern California. Please PM me for fastest response.

https://lh4.googleusercontent.com/-6KiargXnsV0/U2Fqa0ERh2I/AAAAAAAAGC0/BGs7JHAtiiU/w1127-h842-no/195088_10150162489088210_2764477_o.jpg
Please note: This image was taken when the turbo was bought brand new
https://lh5.googleusercontent.com/bX4ApRcx3G2zSfUhwbmDGugLtNxmYfx4gZwOy9BiCqY=w640-h480-no
https://lh3.googleusercontent.com/-1wHaLBQ8xUQ/U2P3lxfVh5I/AAAAAAAAGDg/91IiCgKQyOE/w640-h480-no/photo+3+%25281%2529.JPG
https://lh3.googleusercontent.com/-WIbzoZhuiAs/U2P3mR9t8zI/AAAAAAAAGEI/2QCsEYOqkmw/w640-h480-no/photo+4+%25281%2529.JPG
https://lh3.googleusercontent.com/-d4jS4jKCiUM/U2P3miZyJfI/AAAAAAAAGDw/Zoy4QdlNPn0/w640-h480-no/photo+5.JPG

1.) Used GT2871R (0.64 model). Bought brand new from FRSport and has only seen 14 psi max boost over 4 events. Wastegate arm is tacked to run an external, but you can grind it free if you prefer to run the internal gate. No shaft play and spins perfectly. Asking $900 OBO

https://lh5.googleusercontent.com/-Jz_U8h8lB_s/U2Fqa8djBDI/AAAAAAAAGCw/zBncTaZwN5s/w648-h484-no/39578_492887158209_1490775_n.jpg

2.) PBM HMIC w/ piping for Greddy intake manifold, + Greddy Type R BOV. Prefer not to separate. Need to run a bigger core with the new setup so this is for sale, otherwise I would keep it (response is amazing). Core was dented a little during install but doesn't leak and held 14 psi with no issues. Cold pipe has fitting for IAT sensor, with BOV welded to cold side. BOV will include recirculation fitting. Asking $450 OBO

https://lh5.googleusercontent.com/-K5YYpQfTeg4/UyC87libeeI/AAAAAAAAF9o/3UjdgZ0QKVI/w640-h480-no/photo+1.JPG

3.) Koyo N Flow. Came off my S14 with S13 SR. Some bent fins when removed from the car but doesn't affect cooling, and doesn't leak. I upgraded to a Griffin so this is for sale. SOLD

https://lh4.googleusercontent.com/-44_VKdLdZQw/UL-ywoUywkI/AAAAAAAAEoE/D9xzW3ZF4Jc/w1573-h885-no/2012-12-05_12-40-24_560.jpg

4.) CS Top Feed Fuel Rail. Brand new, ended up going sidefeed. Blue anodized finish, comes with everything needed for install. SOLD!

5.) Walboro 255. Came off my S14, worked perfectly but I'm upgrading. Asking $50 OBO

6.) Greddy/Trust downpipe. Came off my S14 w/ S13 SR. Typical dents/scratches from being lowered, but no holes/leaks. SOLD

7.) CS Test pipe. Used, also came off my S14 w/ S13 SR. Asking $40 OBO

8.) Megan turbo elbow. Used, came off the 2871R. Asking $90 OBO

Here's some other misc stuff I have lying around in case your tax refund is burning a hole in your wallet:

S14 open diff w/ axles
S14 driver door (shell only)
S14 steering wheel w/ airbag
S14 aftermarket rear bumper
Tamron 10-22mm wide angle lens for Canon EF
AE86 FSM (OEM)
Authentic TTE lip for 2nd Gen GS300
NA Miata Ebay roll bar

Thanks for looking!

Ryan
800 for 2871?

SofaKingFast
09-24-2014, 09:33 AM
Sorry guys the turbo has been sold.


Sent from my iPhone using Tapatalk