pics of my s13's new interior

[crioten]

and yes the pics are crappy...this stuff is kinda reflective so it doesnt take to pictures well...anyway:

http://stlsr.jwitech.com/media/uploaded/DSC03580.JPG

http://stlsr.jwitech.com/media/uploaded/DSC03581.JPG

http://stlsr.jwitech.com/media/uploaded/DSC03582.JPG

the stuff i used was herculiner and its pretty easy to use. what i did was rip up all the sound deadening material on the floor with a heat gun. then took a wire wheel to the surface to give it something to bite to and to remove any leftovers of the sound deadening material. i think it looks pretty good and it will look better once the rest of the interior is back in place (interior is everything except the carpet, pretty much)

ill take some more pics tomorrow when i put it all back together

-glen

[Flybert]

Doesn't that stuff weigh a lot.

[AKADriver]

interesting idea.

how much herculiner did you use?

[Bliss]

Doesn't that stuff weigh a lot.

it looks like a paint....??? if so, i doubt it.

[AKADriver]

Doesn't that stuff weigh a lot.

I don't think so. I have a rattlecan of that stuff and.. the rattlecan doesn't weigh any more than a normal spray can. It certainly weighs less than, say, the trunk carpet in an S13.

[shinhed]

I was going to use bed liner too but, only where the front floor mats used to be.

[kandyflip445]

I'm kinda clueless but what did you do this for?

[kuruptR]

possibly a replacement for the stained old looking carpet, possible weight reduction, or even looks.

[Demik]

that looks sic.. take pics wen ur done

[Tygma]

it's pretty much undercoat.. u can buy it anywhere, and no it doesnt weigh a lot

[WunHungLo]

get ready for some headaches. the smell won't go away. i put my carpet back on and i still can smell it on hot days.

[crioten]

Flybert: no, its barely weighs anything at all...i should have weighed the can, but the whole box (including a brush, a gallon can of hurculiner and two rollers) couldnt have weight more than 15-20 lbs.

AKADriver: i put on two coats (it what is says in the instruction box) and the second coat i kinda used a lot...i used 3/4 of a gallon can

kandyflip445: i did it mainly for weight reduction...and i hadnt seen it done anywhere else (not to my knowledge) and i wanted something that wouldnt slip under my feet while trying to autocross (as in a glossy paint surface)

i should have pics posted up in a few hours after i get off my lazy ass...

[kandyflip445]

AH! Ok. I've never seen it done before so I wasn't sure what you were doin.

[crioten]

here are the pics with the interior back in place (well mostly)

http://stlsr.jwitech.com/media/uploaded/DSC03587.JPG

http://stlsr.jwitech.com/media/uploaded/DSC03588.JPG

http://stlsr.jwitech.com/media/uploaded/DSC03589.JPG

http://stlsr.jwitech.com/media/uploaded/DSC03590.JPG

http://stlsr.jwitech.com/media/uploaded/DSC03591.JPG

http://stlsr.jwitech.com/media/uploaded/DSC03592.JPG

let me know what ya think

[Bryants95240sx]

looks good

[R Drifter]

yeah it actually looks preety good......

[Demik]

badd ass yoo i shall copy u now hehehe

[sr20d3t]

thats awesome ; my friend did the similar thing .. however it kind of echo's in the ..hows ur stuff holding up to that ?

[91rusty240sx]

hey, nice work, i dig this alot. how strong is this bedlining? any of it start to crack off?

[crioten]

well, i havent really had a chance to drive it around (you can tell by the missing shifter>missing engine)

but i have kinda been hard on it since it cured fully a few days ago and it takes the abuse pretty well, and it doesnt crack at all...the little bubbles are chunks of polyurathane (for texture) and the rest seems to be almost rubbery

i kinda half tempted to put just the floor mats back in b/c this stuff isnt the nicest thing to scrape skin across lol...but we'll see how it holds up

[Zemus]

Thats what mine looks like, but mines Plasti Coat

[mistaanime]

nice...i'd wanna do dat makes it easier to clean.

[Tygma]

time to get rid of those seats = )

[Bryants95240sx]

yea def. gotta get rid of those seats

[crioten]

no shit, but im poor right now...working on other things...like a nice nice set of delicious subs and a custom fiberglass box :)

but all in good time though