Plastic piece behind gas pedal?

[acslater9]

So I found out a couple of days ago that the plastic piece behind the gas pedal is essentially 'broken'. By broken I mean it is detached and there is no possible way to hold it together. Without that plastic piece that gas pedal is very loose. I have tried tightening the throttle cable and every time I do, I check to see if the pedal is loose or not. So once I apply pressure to the gas pedal it feels good then it just becomes loose as soon as I push the pedal all the way down.

**I added pictures it is the blue thing attached the to black thing.

I need to know how in the world do I fix this? I do not want to be ghetto and use tape/glue. Thank you.

[acslater9]

Any suggestions? I need help :wtc:

[beeboyee]

they have plastic plugs for interior pieces at auto zone
thats what i used... just poppem' in and they worked for me

[acslater9]

they have plastic plugs for interior pieces at auto zone
thats what i used... just poppem' in and they worked for me

How did you do it? It seems like one cannot rip it out without taking the entire throttle cable out.

[94_240sx]

Basically, you need some kind of spacer there. Make a small cut on the plastic spacer, so you can push the cable through.

http://i.frsimg.com//images/detailed_images/Nissan_18201_ThrottleCable_S13KA24DE_02.jpg

[acslater9]

Basically, you need some kind of spacer there. Make a small cut on the plastic spacer, so you can push the cable through.

http://i.frsimg.com//images/detailed_images/Nissan_18201_ThrottleCable_S13KA24DE_02.jpg

So I would need to make a small cut the white/beige spacer and push the cable through? Through what? I'm having a hard time understanding what you are trying to say, sorry.