Zero-Offset
04-24-2014, 01:23 AM
hey duders, i have a mint shape reytec ecu for sale. was run in this dudes car previous to me owning it.
https://scontent-a-sea.xx.fbcdn.net/hphotos-ash3/t1.0-9/942271_496120097108295_1620091905_n.jpg
only pic i have of engine.
https://scontent-b-sea.xx.fbcdn.net/hphotos-frc3/t1.0-9/543376_273796522696312_405457824_n.jpg
car was a track only car so no street miles were really put on it. kept in very good shape and the car was running perfectly fine when it was installed last. i believe there is a base tune on it still but i would strongly suggest getting it tuned before any sort of driving. had a 2871, 550's, cams etc. the fan on top of it was because it was kept in his glovebox during track days, so it needed a way to be kept cool. number on ecu is 01780
http://imagizer.imageshack.us/v2/640x480q90/835/v2wi.jpg
http://imagizer.imageshack.us/v2/640x480q90/838/taqd.jpg
you will need to source the wiring harness/map sensor and all that yourself. or use this as a replacement. does not come with tuning cable or cd. JUST ECU.
you will need a zenki harness for it also, as this is a zenki S14 ecu. so there is no confusion. will not work with s13 sr (to my knowledge) :w00t:
LOCATED IN CANADA. SHIPPING AT YOUR COST.
$200 OR VERY BEST OFFER OBOBOBOBOBOBOBO
PM OR EMAIL FOR BEST RESPONSE [email protected]
SPECS/FEATURES
-Completely Programmable
-Easy Modification with Personal Computer
-Controllable VVT parameters
-Airflowless Control Eliminate Mass Air Sensors
-Real Time Data Monitors / Logging
-Fuel Injected or Carburetor Control
-Point Type, Pointless, Simultaneous or Direct Ignition Control
-Sensor Feedback / Control
https://scontent-a-sea.xx.fbcdn.net/hphotos-ash3/t1.0-9/942271_496120097108295_1620091905_n.jpg
only pic i have of engine.
https://scontent-b-sea.xx.fbcdn.net/hphotos-frc3/t1.0-9/543376_273796522696312_405457824_n.jpg
car was a track only car so no street miles were really put on it. kept in very good shape and the car was running perfectly fine when it was installed last. i believe there is a base tune on it still but i would strongly suggest getting it tuned before any sort of driving. had a 2871, 550's, cams etc. the fan on top of it was because it was kept in his glovebox during track days, so it needed a way to be kept cool. number on ecu is 01780
http://imagizer.imageshack.us/v2/640x480q90/835/v2wi.jpg
http://imagizer.imageshack.us/v2/640x480q90/838/taqd.jpg
you will need to source the wiring harness/map sensor and all that yourself. or use this as a replacement. does not come with tuning cable or cd. JUST ECU.
you will need a zenki harness for it also, as this is a zenki S14 ecu. so there is no confusion. will not work with s13 sr (to my knowledge) :w00t:
LOCATED IN CANADA. SHIPPING AT YOUR COST.
$200 OR VERY BEST OFFER OBOBOBOBOBOBOBO
PM OR EMAIL FOR BEST RESPONSE [email protected]
SPECS/FEATURES
-Completely Programmable
-Easy Modification with Personal Computer
-Controllable VVT parameters
-Airflowless Control Eliminate Mass Air Sensors
-Real Time Data Monitors / Logging
-Fuel Injected or Carburetor Control
-Point Type, Pointless, Simultaneous or Direct Ignition Control
-Sensor Feedback / Control