SR20 VVL Rwd Conversion Setup

[MeanS14]

I have been piecing together a full VVL head swap for my track car for a while now, but have recently decided to go in an entirely different direction. All parts besides the head are BRAND NEW never used



What you get:

p11 VE head (100% complete)
Mazworx VVL Solenoid Relocation Blocks w/o-rings
Mazworx VVL Conversion -AN Lines and Fittings
Mazworx SR oil block adapter w/fittings, oil pressure sensor, and o-rings
New 86.5mm 3 layer MLS headgasket
Xcessive SR20VE Intake Plenum Kit
Xcessive SR20VE IACV remote mount kit
Future Fabrication twinscroll top mount turbo manifold (sch40 material, twin v-band wastegate flanges)
**Note: Jon at Future Fab worked for years at Full-Race Motorsport before branching off and starting his own business. This manifold is top quality!!**





***This is not a 100% complete kit. You will need just a few more items to run this on your RWD sr20***





Price: $2600 shipped




http://i1305.photobucket.com/albums/s542/TFGbusiness/Snapchat-20140415013626_zps3ac6280b.jpg (http://s1305.photobucket.com/user/TFGbusiness/media/Snapchat-20140415013626_zps3ac6280b.jpg.html)

[Bleakley]

Yummy, I'm drooling a little bit. I want to go VVL so bad.

[nachos14]

Everything but Exhaust Mani shipped to 92336

[TEALSQUEAL]

Holy premium pricing... Has the head been gone through and hot tanked? Are the exhaust valve guides good? Aftermarket springs Atleast?

[MeanS14]

Everything but Exhaust Mani shipped to 92336

Not parting out

Holy premium pricing... Has the head been gone through and hot tanked? Are the exhaust valve guides good? Aftermarket springs Atleast?


No need for aftermarket springs. The head came off a running motor and hasn't been torn apart

[TEALSQUEAL]

Not parting out




No need for aftermarket springs. The head came off a running motor and hasn't been torn apart

Holy misinformation batman! You seriously need some education BUYER BEWARE***

[MeanS14]

Holy misinformation batman! You seriously need some education BUYER BEWARE***


You say buyer beware like im selling some broken shit or some junk. GTFO!!


I very well maybe be misinformed about actually needing aftermarket springs, but that doesnt render my sale of these parts useless


I bought a complete running motor and pulled the head off. I was still in the stage of acquiring parts for the swap and hadnt fully finished reaserching what all needed to be done to run this head

You can take your negative comments elsewhere! I am selling quality parts that are all still brand new or in perfect working order

[MeanS14]

This is the information I found on the Mazworx website. I see where it talks about checking exhaust valve guides but it does not state aftermarket valve springs are required


Prepearing head and block for installation
Once you receive the cylinder head, you will need to properly remove it from the block following the factory FSM. The only thing you will use from the cylinder head is the cylinder head, valve cover, VVL solenoids (if you are keeping VVL) and IACV (if you choose to use this on your new Mazworx intake manifold). Once you remove the cylinder head, it is standard practice to check the deck surface to make sure it is still true. It wouldnt hurt at this point to maybe get the cylinder head deck, and pressure tested to ensure all the valvetrain components are still good. We have noticed in the past that the weak link in these cylinder heads are the exhaust valve guides and valves. It maybe wise to at least change out the exhaust valve guides and valves and get the head cleaned up.

[Davidna2fi]

Good price, no more hunting for parts.

[K_style]

What about picked up price?


Sent from my iPhone using Tapatalk

[CaliforniaMayhem]

Wow I want this so bad but I'm a year out from it. Nice setup. I haven't fully done research on what the full swap entails (yet) but this looks quite complete aside from headwork and valve train.

Sent from my XT907 using Tapatalk

[TEALSQUEAL]

As I have a fully assembled sr20ve-t setup sitting in my garage and have done the research to a very lengthy extent you will need springs for the head if you plan to run any decent turbo on the setup and rev over 7k. I'll leave it at that and not even talk about your pricing good luck and I hope ppl do more research...

[capone240]

What's vvl


Keep her sideways stupid

[hobbs]

Did xcessive ever fix their intake plenum with P11 heads that had hood clearance issues? Also reconsidering your price would be a good idea.

[brndck]

I'm interested in the exhaust manifold. Can you post more pics of it please?

[Def]

Did xcessive ever fix their intake plenum with P11 heads that had hood clearance issues? Also reconsidering your price would be a good idea.

It's not a problem with their plenum, but with how upwards facing the VE lower manifold is. I don't see how they can "fix it" and have anywhere near the same plenum volume or shape.

[hobbs]

It's not a problem with their plenum, but with how upwards facing the VE lower manifold is. I don't see how they can "fix it" and have anywhere near the same plenum volume or shape.

Yeah, Nissan, what assholes for making the lower intake manifold like that. Props for xcessive on making a product that only works without a hood on the car.

[htownsr510]

I have a set of 20v vvl springs and retainers much stronger than oem sr20ve springs forsale if anyone is intrested btw great setup at a great price bump for you...

[MeanS14]

BUMP!!!


Buyer flaked out

[MeanS14]

Price reduced!!!


$2450 shipped

[MeanS14]

Still have this

[blank240]

I'm interested if you still have it, but what is still missing from the conversion? Also, are you willing to work with the price?


Sent from my iPhone using Tapatalk

[MeanS14]

Willing to sell the exhaust manifold separately if someone is interested

$900 for the manifold
$1500 for the rest of the parts


***Buyer pays shipping***

[MeanS14]

Now willing to trade for a set of deep dish wheels

Looking for Work, SSR, WEDS, etc

If you have VSKF, SP1, Meisters, or any other legit dish wheel I am willing to trade

Looking for something in 18x9.5 and 18x11 (+5 to -15 offset) or something close

[rb25 run]

u have really nice stuff mate

[doxie]

Willing to buy the Mazworx VVL Solenoid Block with Lines..