PDA

View Full Version : CA sr20det cp pistons and s14 t28

finesse
04-19-2014, 06:53 PM
Have a set of 86mm cp pistons stock compression. Ended up having to go .5mm bigger comes with everything including tech sheet. $500 +shipping.

https://lh6.googleusercontent.com/-GHOwvnmJa0M/U1MZoySy6kI/AAAAAAAAAbc/lUEtU2-3f4M/w731-h548-no/IMG_20140419_155556.jpg

Also up for sale is a s14 t28 unknown miles, no shaft play doesn't come with actuator. Asking $320+shipping.

text 408-513-5485 for faster response

https://lh6.googleusercontent.com/-aYaoGylm67s/U1MZlvZu67I/AAAAAAAAAa8/QuCFUab0DT4/w411-h548-no/IMG_20140419_171620.jpg
https://lh4.googleusercontent.com/-BIOFOc8T_U4/U1MZnULmqlI/AAAAAAAAAbM/SeLccDcWz9g/w731-h548-no/IMG_20140419_171633.jpg
https://lh6.googleusercontent.com/-HKy_sM9XC5s/U1MZntqpTLI/AAAAAAAAAbQ/-TjvqGXNUBk/w731-h548-no/IMG_20140419_171722.jpg
https://lh5.googleusercontent.com/-fhe59PzvxgA/U1MZnrK0V1I/AAAAAAAAAbU/l8_aBm0u0do/w731-h548-no/IMG_20140419_173150.jpg
finesse
04-25-2014, 05:54 PM
bump. Need these gone
finesse
05-07-2014, 01:48 PM
Second bump
chrispaugh
05-21-2014, 01:11 PM
do u still have the turbo? text me info 937-602-5456
finesse
06-12-2014, 08:25 AM
Turbo sold!!! Still have pistons
fullthrottle
06-12-2014, 08:59 AM
That was an s15 dual ball bearing turbo according to the id tag right?
Dboyizmlg
06-12-2014, 10:17 AM
That was an s15 dual ball bearing turbo according to the id tag right?

No, the S15 Dbb turbo is the 91F00 tag.

This one is 69FOO (S14 T28).

It's still a good little turbo though!
JDS Performance
06-03-2015, 10:43 PM
Only real difference in S14 and S15 GT2560R AKA T28 turbos is the S15 had a wastegate divider on turbine housing but that is no big deal these days as most turbo elbows come with the divider. Keep in mind some came with a journal bearing not ball bearing - best way to tell difference if ID tag is gone - look into the oil drain hole - the ball bearing is not build up on the casting like the journal bearing.