PDA

View Full Version : Rb20 oil cooler


Jdmfreak078
04-14-2014, 10:39 PM
Before opening the thread, i tried searching for an rb20 oil cooler, all i was getting is a greddy oil cooler and oil filter relocation kit which i only want is the oil cooler.
So help me to find one for my rb20.
And what brand you guys suggest? Any of you running one?

Any help would be appreciated.

brndck
04-14-2014, 11:26 PM
Wellllll just run a sandwich block then, with fittings for a cooler.
Like this
http://www.240sxmotoring.com/mishimoto-universal-oil-cooler-kit/
Personally I have no experience with mishimoto, but this is the style you're looking for. Ideally one with a built in thermostat inside the sandwich plate.

eek
04-14-2014, 11:31 PM
I know this is for a sr20 build, but I used pretty much the same parts as the op did in his write up. Only thing you need is the sandwich plate adapter that will fit your motor.

http://zilvia.net/f/showthread.php?t=198621

fliprayzin240sx
04-14-2014, 11:36 PM
You should be able to use KA sandwich block since KA and RB uses the same oil filter snout, atleast on RB25s they do.

Jdmfreak078
04-15-2014, 01:13 AM
Thanks guys! Appreciate it!

wowzers9930
04-15-2014, 07:32 AM
Here is an awesome thread I used, I changed it up a little using a summit cooler and using -8 AN lines instead of what he uses -6 I believe...

http://www.nicoclub.com/archives/rb25-oil-cooler-installation.html