INeedNewTires
06-17-2004, 12:16 PM
check this link out,( http://f2.pg.photos.yahoo.com/ph/fielding03/album?.tok=phnKiJBBa916olSm&.dir=/68c6&.src=ph ) everything on there is for sale
The last pic is stuff i need so if you have those parts then lmk!
The suspension arms are used but pressed with NEW Whiteline polyurethane bushings from PDM racing. These make a huge difference in rear suspension slop by stiffening the crap out of all the rear arms. You no longer have to deal with that twisting and flexing of the worn out, stock rubber bushings with these arms. None of the arms are bent or damaged in any way, they are perfect condition and clean and will bolt right into any S13 or Z32. If you want to check out how good of a deal this is just look at the price of the bushings alone at www.pdm-racing.com then you have to factor in the cost to press out the old ones and in the new, and some shops charge alot for that. Also dont forget the canadian over the border tax which adds quite a bit. If i dont get much interest on the forums then ill be putting them on ebay so act fast! im asking:
Toe arms $80 shipped
Traction arms $100 shipped
RUCA's $110 shipped
T/C rods, front, for S13, $115 shipped
I also have whiteline rear LCA bushings for S13 or Z32 so if you interested i only want $60 shipped, and some extra toe/traction/UCA bushings, only want $20 shipped for the pair.
Next, I Have a set of 4 great condition SE wheels from S13. They are the "more likely to clear" Z brake style, or the better style ones. near perfect condition, minor curb abrasion but nothing bad. finish is ok, clear coat isint flaking or anything, no bends or dents. $100 bucks for all 4! in case you dont know they are 15x6 +38 4x114.3
Also have a PAIR of sol seats. These are pretty sweet, have adjustable sliding brackets but will need to be slightly modified to fit in S13/S14. i have one in my car right now and the front holes line up, but the rears are about an inch too far out. could be fixed by either drilling a hole in floor or welding a small plate w/ a hole in it to accommodate for the extra inch needed. ONLY WANT $200 FOR THE PAIR! obo (+ shipping if needed) These things hold you in, nice support but not huge leg bolsters so you can still get in and out of your car easily.
btw, things that are sold on that page with the pics are the bride seat and Z
Again, Pics of EVERYTHING can be found HERE=> http://f2.pg.photos.yahoo.com/ph/fielding03/album?.tok=phnKiJBBa916olSm&.dir=/68c6&.src=ph
cell: 832 443 8088 < cell is quickest and easiest
email: [email protected] << i prefer email over anything but cell!
aim: eauauauau
and of course PM
________________
The last pic is stuff i need so if you have those parts then lmk!
The suspension arms are used but pressed with NEW Whiteline polyurethane bushings from PDM racing. These make a huge difference in rear suspension slop by stiffening the crap out of all the rear arms. You no longer have to deal with that twisting and flexing of the worn out, stock rubber bushings with these arms. None of the arms are bent or damaged in any way, they are perfect condition and clean and will bolt right into any S13 or Z32. If you want to check out how good of a deal this is just look at the price of the bushings alone at www.pdm-racing.com then you have to factor in the cost to press out the old ones and in the new, and some shops charge alot for that. Also dont forget the canadian over the border tax which adds quite a bit. If i dont get much interest on the forums then ill be putting them on ebay so act fast! im asking:
Toe arms $80 shipped
Traction arms $100 shipped
RUCA's $110 shipped
T/C rods, front, for S13, $115 shipped
I also have whiteline rear LCA bushings for S13 or Z32 so if you interested i only want $60 shipped, and some extra toe/traction/UCA bushings, only want $20 shipped for the pair.
Next, I Have a set of 4 great condition SE wheels from S13. They are the "more likely to clear" Z brake style, or the better style ones. near perfect condition, minor curb abrasion but nothing bad. finish is ok, clear coat isint flaking or anything, no bends or dents. $100 bucks for all 4! in case you dont know they are 15x6 +38 4x114.3
Also have a PAIR of sol seats. These are pretty sweet, have adjustable sliding brackets but will need to be slightly modified to fit in S13/S14. i have one in my car right now and the front holes line up, but the rears are about an inch too far out. could be fixed by either drilling a hole in floor or welding a small plate w/ a hole in it to accommodate for the extra inch needed. ONLY WANT $200 FOR THE PAIR! obo (+ shipping if needed) These things hold you in, nice support but not huge leg bolsters so you can still get in and out of your car easily.
btw, things that are sold on that page with the pics are the bride seat and Z
Again, Pics of EVERYTHING can be found HERE=> http://f2.pg.photos.yahoo.com/ph/fielding03/album?.tok=phnKiJBBa916olSm&.dir=/68c6&.src=ph
cell: 832 443 8088 < cell is quickest and easiest
email: [email protected] << i prefer email over anything but cell!
aim: eauauauau
and of course PM
________________