View Full Version : What driveshaft is needed to complete S13 swap? ABS/SUPER HICAS->SR20DET
Migit240sx
04-09-2014, 12:56 AM
Hello Zilvia!
I'm confused as to what driveshaft is needed to complete my SR swap.
My S13 shell consist of SUPER HICAS/ABS. Since I'm going Sr20, what driveshaft should I be looking for?
zerodameaon
04-09-2014, 01:00 AM
If the car came with a driveshaft and it matches your transmission(auto to auto etc.) you will use that. You need the ABS shaft that matches your transmission in other words.
Migit240sx
04-09-2014, 02:37 AM
My car did not come with a driveshaft, It's a bare shell
zerodameaon
04-09-2014, 03:45 AM
Ok just need an abs shaft out of any s13 so long as it matches your transmission type.
240pimp
04-09-2014, 08:13 AM
Why not just buy a one piece driveshaft from somewhere like Z1 performance in georgia?
The used 2 piece driveshafts can give you alot of headaches. vibration, having to buy several new pieces, etc. A new steel 1-piece solves all those problems, probably cheaper.
I run an aluminum one now......Awesomeness!
Migit240sx
04-09-2014, 11:16 AM
Why not just buy a one piece driveshaft from somewhere like Z1 performance in georgia?
The used 2 piece driveshafts can give you alot of headaches. vibration, having to buy several new pieces, etc. A new steel 1-piece solves all those problems, probably cheaper.
I run an aluminum one now......Awesomeness!
That's the route I think ima go. To clarify, it's an s13 shell with abs/super hicas. I'm swapping over an s13 redtop. I'm guessing I only need an abs sr20 manual driveshaft?
Sent from my SGH-M919 using Tapatalk
fliprayzin240sx
04-09-2014, 07:16 PM
You just need to find a manual S13 ABS driveshaft...doesnt matter if its for an SR or KA, they're the same lenght. The difference between an ABS and non-ABS is the longer diff snout so the ABS ones are shorter.
Migit240sx
04-09-2014, 07:17 PM
You just need to find a manual S13 ABS driveshaft...doesnt matter if its for an SR or KA, they're the same lenght. The difference between an ABS and non-ABS is the longer diff snout so the ABS ones are shorter.
Thank very much sir! I'd give you kudos if there was a kudos button!
Sent from my SGH-M919 using Tapatalk
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.