Garage Collective S13 drift build

[AVmagneticZ]

Had a bit of time to post some pics here if you guys are interested to see my new build for this drift season. Last years car kicked the bucket. the shell was rusted out and it was good for learning but time to get into something solid.

My goal for this car is to keep it clean, keep it looking aggressive, and stylish. to me thats mostly what drifting is. Not about huge power, eventually i just want 400 range. Last year the old build dyno'd at 306hp/316tq. My build uses all original authentic parts.
Its in the early stages im falling way behind as the first event is in a week. clearly going to miss that one.

I dont really want to type lots of description for every picture. Im more focused on my instagram and facebook pages. so if you like what you see i encourage you to follow those. as they are up to date and properly sorted.
club/lifestyle brand a friend and i started called Garage Collective.
Instagram: Garage_Collective
Facebook: facebook.com/garagecollectivedrift

ok heres some pics. starting from when i drove down to ohio from toronto to grab the shell.

https://farm8.staticflickr.com/7232/13635939593_3426d4b0cc_b.jpg
https://farm8.staticflickr.com/7244/13635942863_d60c0b2763_b.jpg
https://farm3.staticflickr.com/2927/13635859615_d7ad1bdf06_h.jpg
https://farm3.staticflickr.com/2828/13636206414_2f42e53d5e_h.jpg
https://farm8.staticflickr.com/7222/13636205914_d2b372d4c6_h.jpg
https://farm4.staticflickr.com/3687/13635872783_b0e46f49f1_h.jpg
https://farm4.staticflickr.com/3738/13635857165_1d6b0a9b96_h.jpg
https://farm4.staticflickr.com/3825/13635856675_27d9c96bf7_h.jpg
https://farm8.staticflickr.com/7326/13636199104_1669f5a25a_h.jpg
https://farm8.staticflickr.com/7090/13635850175_080c108dae_h.jpg

[AVmagneticZ]

completed cage
https://farm4.staticflickr.com/3758/13636212794_1dde0e1fc0_h.jpg
https://farm8.staticflickr.com/7084/13635866605_5d938e4723_h.jpg
https://farm8.staticflickr.com/7043/13635881653_6eaa1171f3_h.jpg
https://farm4.staticflickr.com/3775/13636211914_5abfb0ec1c_h.jpg
https://farm8.staticflickr.com/7222/13636211594_8eccd2ce84_h.jpg

[AVmagneticZ]

dropped the subframes got them ready for powder.
https://farm4.staticflickr.com/3739/13636287184_d6a51899c0_b.jpg
https://farm8.staticflickr.com/7455/13635885325_2c2e69568b_b.jpg
https://farm4.staticflickr.com/3803/13636230674_85a686f56f_b.jpg
https://farm6.stat6icflickr.com/5255/13635899383_7b7e39220e_b.jpg
https://farm8.staticflickr.com/7105/13635898743_b85ed555d7_b.jpg
https://farm3.staticflickr.com/2858/13635897513_5a40804f09_b.jpg

Here's The Driftworks suspension components that are going in. still need to order the rlca and rear knuckles.
https://farm3.staticflickr.com/2854/13635923573_c6b4616147_b.jpg

[bova17]

first comment, Looks clean good luck

[AVmagneticZ]

gonna run these bash bars courtesy of dang drifters. powdercoated gloss white

https://farm8.staticflickr.com/7319/13636227794_6c4fdc2254_b.jpg
https://farm8.staticflickr.com/7019/13636227404_cf8ceeddf1_b.jpg
https://farm8.staticflickr.com/7404/13636226584_a676a3b651_b.jpg

[AVmagneticZ]

here's some more of the parts
https://farm8.staticflickr.com/7038/13636341374_c86faa1e33_b.jpg
https://farm8.staticflickr.com/7012/13636009213_9bfeba7b7c_b.jpg
https://farm8.staticflickr.com/7404/13635992705_c461ee504c_b.jpg
https://farm6.staticflickr.com/5172/13636336484_8f80cdeb23_b.jpg
https://farm4.staticflickr.com/3666/13636339934_85063953b4_b.jpg
https://farm6.staticflickr.com/5513/13636019723_33526fc6a9_b.jpg
https://farm8.staticflickr.com/7323/13636354944_5e5ea12b1d_b.jpg

[AVmagneticZ]

started messing around with some aero. made my own side skirt add ons/flares. also messing around with front canards and under canards.
https://farm8.staticflickr.com/7004/13635897963_af076915cd_b.jpg
https://farm3.staticflickr.com/2878/13635924953_e4865c5fa0_b.jpg
https://farm8.staticflickr.com/7369/13635889005_15764c6294_b.jpg
https://farm4.staticflickr.com/3669/13635889345_1454754fb6_b.jpg

[AVmagneticZ]

started cutting the rear quarters for the dmax 50mm wide fenders.
https://farm4.staticflickr.com/3767/13635953085_4a04857766_b.jpg

[AVmagneticZ]

today i started with the tubs. cut out the oem ones. planing on running a tube for reinforcement. no point in building sheet metal tubs since its a track only car.
just waiting on a welder to finish all the welding.

https://farm8.staticflickr.com/7161/13684929034_bbfb601bfe_b.jpg
https://farm3.staticflickr.com/2890/13684571865_cfe387ed46_b.jpg

[AVmagneticZ]

first comment, Looks clean good luck

hey thanks alot

[AVmagneticZ]

thats it up to today.
ill leave you with this for now. taking the Z front bumper to get painted its full of rock chips.
and a shot of our club sticker.
https://farm8.staticflickr.com/7192/13635963673_76936d65f7_b.jpg
https://farm4.staticflickr.com/3747/13684612555_a5fa076e1e_b.jpg

ill keep this thread active as much as i can. Theres much work to be done. Im shooting for a little over a month to finish. this is my side thing. i work a 9-5.
Remember the IG and FB accounts are more into detail, also show much more then just this build. Other crew cars, drift events, videos, lifestyle etc. pages are fairly new please like, follow, and share. much appreciated.
IG: @garage_collective
FB: facebook.com/garagecollectivedrift

[Drifting Kalamari]

Looks great!

[Kwolfe]

Looks rad so far.

[va240dude]

Looks clean. Can't wait to see the finished product!

[DILLONDILLONDILLON!]

Amazing!!! Looking forward to your progress.

[tricky_ab]

Another local? That's rather cool...

I like what I'm seeing so far! Who did your cage?

[AVmagneticZ]

Thanks for the positive vibes so far guys. I'm also excited to see it finished.

Tricky_ab I ended up using pat at cyrious garageworks to do the cage for me since I don't have the proper tools or enough experience . Highly recommended he knows his shit and is a fellow drifter doing his thing so we gotta support eachother right.

[AVmagneticZ]

Taking out the Tomei 2 way from the s13 diff and going to throw it in an r32 gtst diff i picked up. this is for the final drive gearing. going to run the 4.3 from the 4.08
i think it will put me where i need to be in 3rd gear.
https://farm8.staticflickr.com/7119/13636038933_e7328ed6c7_h.jpg

[crm1]

Those dang drifters bash bars are sweet. the dang drifters shop isn't too far from my house and that dude definitely knows his stuff

[AVmagneticZ]

ok so heres the plan for this. ive been held back by lack of a welding machine lol.
but managed to get everything pre fabbed. stuff needs to be trimmed up and cut straight since it was made from scrap. but the bends are ready to go etc.
not sure if ill run those extra little tubes . it might be mostly looks..im sure it will have some strength to but...
https://farm8.staticflickr.com/7382/13808415385_e23d4be288_b.jpg
https://farm4.staticflickr.com/3674/13808415255_425268db05_b.jpg

[Apex Eight]

Nicee, subbed

[AVmagneticZ]

ok so i acquired a welder finally from a buddy. this would be my second time trying mig. im new to setting up the machine n what not. and i didnt have material to practice. even if i did im more of the fuck it dive right in type. and thats kind of what i did with the plate on the shock tower. machine wire speed was to fast. so i made a small mess but its not bad i can clean that up easily. I ended up getting it right by slowing it down. so for now its just somewhat tacked to see what it looks like. debating running that extra small tube. I would have to notch it somehow.
I managed to cut the main tube BANG on after multiple cuts. the bends made by my friends shop from the template i made out of copper pipe are perfect. lucky.
my cousin who welds for a living is gonna come by tomorrow and give me a hand to finish up this side. and ill post a better pic when its looking nice.
overall im happy so far.

https://farm3.staticflickr.com/2812/13861705165_0722683286_b.jpg

[AVmagneticZ]

once i trim the plate on the shock tower smaller. it wont look like its on an angle like in the pics. I know it looks kind of shady right now but it wont stay like this.

[AVmagneticZ]

Few small things from driftworks came in today. i sold my old DW tension rods so i could buy these. they are offset, hopefully i can go max angle without hitting them.
also they included a small bag of gummy candy? thats new. i wanna eat it but. i dunno..
https://farm8.staticflickr.com/7169/13880045225_2d49fb9e03_b.jpg

[tricky_ab]

Damn, if you're not going to eat it, I will :)

When my friend bought some DW stuff, it came with some awesome fruit toffy stuff.

[beems240sx]

What did you use to paint the interior/cage? The white looks incredible

[Purestock240]

wait this is in toronto? awesome!
parting out a car wasaga beach area if you need any random things

[AVmagneticZ]

i went cheap on the paint its just tremclad gloss white. looks clean tho
yah in toronto. dont need any parts tho thanks

[AVmagneticZ]

got it done tonight. im so tired. lol

https://farm3.staticflickr.com/2911/13884101663_3712d4f982_b.jpg
https://farm6.staticflickr.com/5060/13884029185_a9cae492f6.jpg
https://farm3.staticflickr.com/2863/13884429384_20075032cf_b.jpg

[Reece]

Making really fast progress. I like it.

[UNDECIDEDFBODY]

subscribed great job

[AVmagneticZ]

thanks guys.
been real busy lately with some other stuff. trying to pick a color to paint the engine bay. i could stick with the white like the interior but a cool color could look nice. Hopefully ill make some progress with that this week.

[smokescreen240]

nice coupe! subbed!


moar pics of the z!!!

[STL240SXDRIFT]

Great fab work! Keep it going!

[Oakville]

Cage looks beautiful! His shops 10 mins from my place, he'll do my cage one day. i've wanted to see a close look at how its done, this is great!

[AVmagneticZ]

nice coupe! subbed!


moar pics of the z!!!

here's a teaser doing a photoshoot soon. as well as filming a little something something tomorrow.
https://farm8.staticflickr.com/7200/14010725433_470e7aed74_h.jpg

[AVmagneticZ]

so i had an issue with the 4.3 final drive swap. I was told if i got an r32 gtst pumpkin all i would have to do is take out my 2 way from my s13 non abs and throw it in the r32 one. turns out the ring gear bolt holes are different. so i would have to machine my 2 way? anyone have experience with this? i noticed the axles are different on each pumpkin. where as one friend i talked to told me how his were the same and he just swapped carriers ?
anyone?

[AVmagneticZ]

well for now a temp solution is im going to run the diff that came in the r32 and weld it up. not ruining the 2 way. ill keep it on the side until i find the correct gear set that mounts to my 2 way.
who knows i may like the welded diff life better.
anyways just sanding the engine bay on the s13 hoping to go grab some primer and get that done tomorrow.. until further updates heres a shot of the z33 from yesterday
https://farm8.staticflickr.com/7407/14001579565_714fb27f63_h.jpg

[AVmagneticZ]

paint prep can blow me. this took way to long lol.
its all sanded, Next step is wash/degrease the engine bay, but its like 0 degrees out here which is bullshit. so im not gonna bother today. tomorrow is going to be nicer.
After that going to build a quick tarp style booth to cover the area, mask everything and spray the primer i got today.
im looking forward to the next picture i post it will look a lot cooler.
also i still dont know what color to go with for the bay. i dont wanna give it away but the outside of the car is going to be dark brown metallic shown in this next pic.
https://farm3.staticflickr.com/2899/14001158086_b4f6e9ec36_b.jpg
https://farm6.staticflickr.com/5514/14024736984_8706e0e83b_o.jpg

[Macaronnie]

Cant wait to see it painted. Good luck man!

[I<3BEWBZ]

Car looks great man. Love the s2000 as well.

Canada :love:

[AVmagneticZ]

thanks guys!

Done the first layers of primer.
I need to decide on a color asap.
Some ok ideas
-Audi Grey (nimbus grey?)
-light pink (I dunno..)
-pastel yellow
-white
It's got to be a light color. maybe i can throw some metallic or sparkly clear coat ontop

https://farm6.staticflickr.com/5284/14037121141_08cbed8842_h.jpg

[tricky_ab]

I'd go with white or grey... I'd place white a head of the grey.

[mechanicalmoron]

I like ugly colors, but I like the primer grey.

Subscribed, this looks to be going cool places.

[AVmagneticZ]

think im leaning towards a soft yellow, maybe pastel yellow. something close to the club sticker yellow.

[Macaronnie]

+1 to what tricky said. white or grey. I just looked at that audi grey and I would def go with that.

[AVmagneticZ]

https://farm8.staticflickr.com/7202/14074451902_8fde8603b5_b.jpg

all the primer is done. going to spray the rest friday after work. deciding on a color tonight lol.
i have no patience for paint lol but i learned a bit more doing this engine bay.

[Buummp]

DAMN. Subbbedddd. Ill be keeping a close watch on this.

[AVmagneticZ]

few parts came in.
this asd piece is very nice. lightweight high quality you can tell. i owned the k sport before this. NO comparison. love it.
https://farm6.staticflickr.com/5524/14105504913_ac764f1adf_h.jpg
https://farm6.staticflickr.com/5591/13898830729_088c11e049_h.jpg
https://farm6.staticflickr.com/5592/13898837400_5c9dd0b7b3_c.jpg
https://farm6.staticflickr.com/5335/14082233361_90678930b9_b.jpg
https://farm6.staticflickr.com/5235/14082233031_e1a5d274b0_h.jpg

[AVmagneticZ]

sneak peak of what went down tonight. more detail tomorrow
https://farm6.staticflickr.com/5332/13906884428_55461e72d5_h.jpg

[DILLONDILLONDILLON!]

DAMM YOU!! we dont have time for it tonight we need it now!

[AVmagneticZ]

a few more pics of the finished engine bay, now we had a few issues.
one the base kept spitting out some shit i dunno if it was sitting for a while but when we strained it lots of thick stuff appeared. some must have gone through the strainer.
two there is a few spots where there must have been some chemical residue and it made the paint basically slide off those tiny areas. so i will have to try n touch up unfortunately one is right on the weld on the shock tower and its big.
this shit is very tedious. all that aside it looks cool and the color came out how i like. we mixed two paints together to get this.
the mid clear we put on looks awesome with the speckles in it.
mind u this was all done on budget and in a rush. inside a garage made booth in 0-10 Celsius.
ive def learned some stuff doing this paint job
https://farm6.staticflickr.com/5197/14105949911_576a31feb5_b.jpg
https://farm8.staticflickr.com/7301/14105950401_80d5a21055_b.jpg
https://farm6.staticflickr.com/5155/13922530567_b5782dbd13_b.jpg
https://farm6.staticflickr.com/5504/14105951121_a94c488262_b.jpg

[AVmagneticZ]

i have some free time now so tonight i just got started. next few days shit should get rollin nicely. i know theres a few bolts here and there i have to get but everything else should be good to go. waiting on a few more engine parts and then that will be ready to drop in.

https://farm6.staticflickr.com/5488/14134444524_2018192744_b.jpg
https://farm8.staticflickr.com/7346/14130855891_c9fb08cf96_b.jpg
https://farm8.staticflickr.com/7309/14131223802_497f5efd76_b.jpg

[AVmagneticZ]

ok started today by installing the fuel pump (walbro) and mounting the battery in the trunk.
https://farm8.staticflickr.com/7387/14169257593_0fb807e5a5_b.jpg

after that did some plumbing. new braided fuel lines, routed the lines for the factory brakes inside the car and here you can see where it comes out for the rear. tried to keep it neat. i still have to run the line down for the second calipers in the rear. i have the line all bent and ready to go but i want to make sure it doesnt interfere with anything so im going to install the subframe first. hopefully thats the right move.
https://farm3.staticflickr.com/2914/14149368814_a8ef252f4e_b.jpg

put the Chase bays master back on need to secure the lines in place. put the clutch master back in as well. same thing need to clip the line in place...have to go find some clips.
https://farm8.staticflickr.com/7458/14169257483_ebd0be35e9_b.jpg

next put all the pedals back in and the steering column. then spent a bunch of time cutting up this old dash i had. this way i can just make one or two nice cuts on my finished dash and know i wont fuck it up. im excited to see the interior done its going to look nice.
https://farm8.staticflickr.com/7304/14149209005_36e8b7d8eb_b.jpg

ok now the rear subframe. for the diff im just running and r32 gtst diff with a welded. i was tryingto use my 2 way from the s13 but unfortunatly it doesnt work with the ring gear out of this pumpkin. so this is temporary until i get a 4.3 out of a s13 with ca18det or figure out another way. who knows i might like the welded better.
another thing is the LCA and knuckles. money is tight so i have to run the oem ones for now. which is ok. but i plan on getting the driftworks ones soon. i just need to get this thing drifting, fast.
so here it is assembled ready to be put in ill do that tomorrow.
https://farm8.staticflickr.com/7304/14126017516_b25a983ce6_b.jpg

lastly heres a shot of the dual caliper kit. its the one the george guy sells off of here. not bad i had a fucked up issue with mine where i had to shave the caliper a little as well as an issue with getting one of the caliper bolts in. i made a solution but itll be hell to take off the calipers for the hydro lol. anyways works good i used it last year.
https://farm8.staticflickr.com/7408/13962535869_d4f55bf829_b.jpg

[AVmagneticZ]

its coming together. cut the dash got it in today looks nice on the white. and some bullshit wiring work going down. need to route everything nicely and tie it down.
https://farm8.staticflickr.com/7404/13967848399_091d121844_b.jpg

rear sub frame is in so its officially rolling now.. also has the 4 factory brake calipers working as well.
https://farm8.staticflickr.com/7360/13967838317_cd2ba608c5_b.jpg

[AVmagneticZ]

ok heres a preview of the aero. going to be fitting these this week.
https://farm3.staticflickr.com/2909/14186997614_563ae41388_h.jpg

[tricky_ab]

I had seen that picture earlier on FB. I can't wait to see it fitted :)

[Redleader540]

Super clean.

[s13_chris93]

Omg beautiful

[smokescreen240]

that kit looks to be really agressive with those add ons and splitters.

just the way i like it!

[LaMaR-]

where did you get that battery tiedown? Looks really good

[AVmagneticZ]

where did you get that battery tiedown? Looks really good

Thanks, Ordered it through odyssey

[AVmagneticZ]

car should be running real soon. again stupid little things i need to find. its long weekend so i cant get shit places are closed. need some line for the oil cooler and fittings. going to start hooking up the engine tonight after this tinder ho leaves my house.
heres the offset rack spacers. made by era 1. perfect fitment for usdm racks no cutting required. smart.
https://farm3.staticflickr.com/2936/14192361506_2c6416fa38_h.jpg
heres the tomei oil block adapter installed. nice piece.
https://farm3.staticflickr.com/2922/14215338304_bb577c7e68_h.jpg
and last night we installed clutch and tranny and dropped that bitch in.
https://farm3.staticflickr.com/2930/14192362246_b824be3f61_h.jpg

[tricky_ab]

You've been making great progress on this :)

[AVmagneticZ]

Lots of updates to busy to post. Next week I will been going at it every night to make it to an event Sunday

[AVmagneticZ]

ive been busy. car still needs some work. mount the bodykit possibly move oil cooler. nice wheels.
https://farm6.staticflickr.com/5487/14275702542_aeac9955e9_h.jpg
https://farm4.staticflickr.com/3738/14274430571_4f4c1e72ba_h.jpg
https://farm4.staticflickr.com/3830/14297947333_4d961110ac_h.jpg
https://farm6.staticflickr.com/5120/14277759645_69b885c5a9_h.jpg
https://farm6.staticflickr.com/5534/14274431511_7d5a1524fe_h.jpg
https://farm4.staticflickr.com/3822/14277313394_9bf52e07cc_h.jpg
https://farm6.staticflickr.com/5483/14274432681_e0acbe7af5_h.jpg
https://farm6.staticflickr.com/5549/14277761205_16ea14e421_h.jpg
https://farm4.staticflickr.com/3792/14091106928_f6c8f31c0e_h.jpg
https://farm4.staticflickr.com/3699/14091196557_4337581e26_h.jpg

[AVmagneticZ]

https://www.facebook.com/photo.php?v=770077199693610&set=vb.662428740458457&type=2&theater


teaser clip

[Oakville]

Colours look nice. Where a bouts in toronto are you?

[AVmagneticZ]

pretty much done the interior except for the passenger seat.
https://farm4.staticflickr.com/3761/14291850681_421f1bc7cc_h.jpg
got the sticker treatment
https://farm4.staticflickr.com/3773/14108655497_927dfc71e8_h.jpg
mock up old front bumper
https://farm4.staticflickr.com/3771/14108655817_638989ab86_h.jpg


things to do. lower that bitch. check steering. space out crap wheels a bit more until i can afford some baller joints in better sizes. wrap bumpers and mount bumpers. greddy oil pan/ tomei turbo elbow.
completed pics on the way. not far now....but is it ever really completed?

[AVmagneticZ]

havent updated in a bit. i had a few stupid issues with the car but everything is sorted out its running nice and im going drifting saturday FINALLY. gonna shakedown the car hopefully make it back in one piece.

last week i had to drain the oil so decided i might as well throw this bastid in.
https://farm3.staticflickr.com/2899/14386250606_234ae7cd89_o.jpg
install was relatively easy. hardest part was getting the old pan off. i basically destroyed it but whatever. managed to not gouge the block side and that is key. but i did put to much rtv. now i know. lol.
https://farm3.staticflickr.com/2901/14429551423_be43661665_o.jpg

This is a shot from today. finished up the bumpers and sides. could use a few touch ups on the wrap. the primer on these bumpers is not an ideal base for wrapping over. but it did the job.
mounted the msports canards and origin labs front under canards. to the bn sports front bumper
https://farm6.staticflickr.com/5117/14429535013_a6a6dbcf84_h.jpg

[AVmagneticZ]

OH also i ordered wheels! waited to damn long but i found a good deal. wont say what they are yet. but they are going to look DOPE. i just hope they make it in time for importfest. should be here in bout 3 weeks .
ill also throw up some pics/videos after saturday

[JonathanPrem]

Where did you get the bottom spilter for the front bumper?

[AVmagneticZ]

They are origin labs front under canards. Got em through my parts supplier nextmod

[AVmagneticZ]

https://farm6.staticflickr.com/5577/14415738844_43cc2cd411_h.jpg

tomorrow first drive. finally.

[EDacIouSX]

jesus, looks beautiful. may i ask how much did you pay for those origin front under canards? thinking about selling mine and not sure what price to sell them at

[AVmagneticZ]

jesus, looks beautiful. may i ask how much did you pay for those origin front under canards? thinking about selling mine and not sure what price to sell them at

Shit I don't remember exactly cause I ordered them together with the m sports stuff.

[ehhhregartless]

can you show a pic of how you mounted the lower canards? i have the same ones but looking into options of how to mount.

[angel mkiv]

Wow this build is so badass!icant wait to see more updates!

[AVmagneticZ]

can you show a pic of how you mounted the lower canards? i have the same ones but looking into options of how to mount.

i basically just positioned one until i thought it looked good. i see some pics online they are all mounted differently. to me it looked best by making the wing part flush with the end of the bumper and keeping it about 1 1/4" away. then pull the front section out so that where the very beginning of the wing starts to form is 2" away from the bumper.
then i just drilled three small holes about 1 1/2" away from the edge of the bumper. took it off drilled them bigger and used 3 small nuts and bolts with lockwashers and washers to hold it on. its on there good. if i get a chance ill try and take a pic hope that somewhat helped.
then for the other side i did the exact same measurements and it worked out nice. u can see the pic above they are exact the same distances and they are centered .

[carcrazee]

is that the "duraflex" or "vis" kit? both make a bn rep, sick build I must say

[FuckWasted]

Wow, coming out really nice love the color. Post more pictures asap.

[AVmagneticZ]

is that the "duraflex" or "vis" kit? both make a bn rep, sick build I must say

its the vis. fb fits ok. rear usually fits ok although this one is not ok. sides are always shit.

[AVmagneticZ]

Wow, coming out really nice love the color. Post more pictures asap.

thanks yah i want to get some quality photos but when its done and my wheels come in.

[AVmagneticZ]

https://www.facebook.com/photo.php?v=782950998406230&set=vb.662428740458457&type=2&theater

a quick lap from Saturday when i took it out for the first time

[supersayianjim]

so much work!! why didn't you go with a silvia front end??

[I<3BEWBZ]

Dude, this thing is gorgeous. Awesome build!!

[AVmagneticZ]

so much work!! why didn't you go with a silvia front end??

Like the old school look of the flip ups. And I'd say majority of ppl have Silvia fronts.

[Oakville]

Like the old school look of the flip ups. And I'd say majority of ppl have Silvia fronts.

This..wish more thought like this

[AVmagneticZ]

havent posted in a while. heres some recent event pics. Car is running great. broke the offset rack spacer to steering rack this weekend. welded it back together on the spot and was good for day 2.
https://farm6.staticflickr.com/5489/14635211083_fce86eb4c5_o.jpg
https://farm4.staticflickr.com/3868/14428861317_99d7f78bac_o.jpg
https://farm6.staticflickr.com/5502/14428603430_8302158b54_o.jpg
https://farm4.staticflickr.com/3842/14614723822_f2daee8471_h.jpg
https://farm4.staticflickr.com/3905/14428667479_b20809b567_h.jpg
https://farm3.staticflickr.com/2918/14428601790_bcb4b6affa_h.jpg
https://farm6.staticflickr.com/5576/14428636068_fcf5714452_h.jpg
https://farm4.staticflickr.com/3839/14592232956_8b2eff1b29_h.jpg
https://farm3.staticflickr.com/2900/14635210963_0db9a06141_h.jpg

quick clip someone sent me with their iphone

https://www.facebook.com/photo.php?v=794304987270831&set=vb.662428740458457&type=2&theater

please follow on facebook at facebook.com/garagecollectivedrift for constant updates and details. also updated pics on instagram @garage_collective

[Nissansota240]

Car is looking rad dude!

[whatsderftings13]

I dig this build, I dig this car, I dig that color! I love those canards and splitters, who makes them? or did you make some on your own??

[AVmagneticZ]

I dig this build, I dig this car, I dig that color! I love those canards and splitters, who makes them? or did you make some on your own??

thanks they are msports canards and origin labs splitter.

[AVmagneticZ]

https://farm4.staticflickr.com/3880/14436908309_a10d8979cc_o.jpg
https://farm6.staticflickr.com/5520/14622997642_0158452297_b.jpg

cant wait till my wheels get here...couple weeks.

[PatGlocks]

What happened with the fire at shanny ?


Sent from my iPhone using Tapatalk

[AVmagneticZ]

What happened with the fire at shanny ?


Sent from my iPhone using Tapatalk

Caused by my exhaust I took the muffler off earlier in the day cause it was hanging. So it backfires and there must have been debris or something it ignited around the gas tank . The plastic shield in front of the tank . Didn't damage anything except fuel lines. We put it out fast enough. Luckily it didn't go through the lines.

[PatGlocks]

Was sketchy to watch. We came around the corner and I was super confused at first haha. Glad nothing's broken


Sent from my iPhone using Tapatalk

[AVmagneticZ]

Was sketchy to watch. We came around the corner and I was super confused at first haha. Glad nothing's broken


Sent from my iPhone using Tapatalk

Oh we're you one of the guys with an extinguisher? Haha man I was shitting my pants .

[PatGlocks]

Yeah , passenger in the black r32. Yeah you guys looked pretty worried haha


Sent from my iPhone using Tapatalk

[AVmagneticZ]

bunch of photos from this weekends event
https://farm4.staticflickr.com/3854/14532729698_d2b7f2d8fd_h.jpg
https://farm4.staticflickr.com/3847/14532727629_d0e9200225_h.jpg
https://farm6.staticflickr.com/5588/14696377116_a8e13450cc_h.jpg
https://farm4.staticflickr.com/3861/14716992604_0b8fb200f5_h.jpg
https://farm4.staticflickr.com/3890/14696345056_05c2b47204_h.jpg
https://farm6.staticflickr.com/5595/14696345776_d96c4c2db9_h.jpg
https://farm4.staticflickr.com/3869/14719344435_2bb7dcc4a8_h.jpg
https://farm3.staticflickr.com/2914/14532692879_4f9df0db6e_h.jpg
https://farm6.staticflickr.com/5585/14532692449_eff06770c4_h.jpg
https://farm3.staticflickr.com/2930/14532906387_64a0531aba_h.jpg

[Reece]

Not bad. Needs cool tail lights now.

[AVmagneticZ]

hopefully those ^ and my wheels come this week
https://farm6.staticflickr.com/5567/14533955329_5dda786607_h.jpg
this pic just popped up on my feed. i love it

[AVmagneticZ]

Couple changes happened this weekend for importfest toronto. got lots of pics and we filmed a small video that we are currently editing.
heres a teaser.
https://farm4.staticflickr.com/3844/14758419545_265b08043a_h.jpg
https://farm3.staticflickr.com/2930/14571729250_bb4bfb876b_h.jpg

those plus dmax tails and carbon under canards for rear bumper

[jakewolf]

Awesome build! Love it.

[AVmagneticZ]

UvdbdHkoTpI

[ehhhregartless]

Very styleish, quality editing too. Looking good

[AVmagneticZ]

thank you!!

[Reece]

It's... perfect.

Oooh nice Dirty Love sticker too!

[AVmagneticZ]

https://farm4.staticflickr.com/3884/14653313417_b16c8430ea_o.jpg
https://farm4.staticflickr.com/3874/14839503392_3068f5e45c_o.jpg
https://farm6.staticflickr.com/5580/14839865325_0d19b6ba82_h.jpg
https://farm4.staticflickr.com/3854/14653218639_8b356b0fdb_h.jpg
https://farm4.staticflickr.com/3905/14816892266_372bf7dc78_h.jpg
https://farm4.staticflickr.com/3859/14653243008_3f6280ae1b_h.jpg
https://farm4.staticflickr.com/3897/14839505322_8c82536ee8_h.jpg

[Oakville]

those shots my god! did you have any hassle running the yellow transport plate with that? I have one but have never used it with a track car

[AVmagneticZ]

those shots my god! did you have any hassle running the yellow transport plate with that? I have one but have never used it with a track car

thanks
I dont know what would happen if i was to get pulled over. Took a risk

[STL240SXDRIFT]

One of my favorite wheels from WORK...nice job!

[Apex Eight]

I've probably watched that video about 10 times now lol. Very well put together and I dig the Works man, keep it up.