s13 wheel stud question.

[beardedjennings]

I recently ordered some bolt spacers for my 240 and I accidentally ordered them in a m12x1.5 instead of the m12x1.25. Instead of having to reship them and deal with all that, is there a m12x1.25 wheel stud that will fit in the 240?

Any help would be appreciated.

[fliprayzin240sx]

Its bolt on spacers, just get new lugnuts with 12x1.5s.

[cotbu]

OP, just think for a minute or two.....! got it know fix your issue!

Flip, that would cover the wheel to spacers, but he probably needs new lugs that holds the spacers on, if his old lugs had a stupid design to them. Still an easy fix, that shouldn't require him/her to remove the oem studs

[fliprayzin240sx]

Well, if its a typical bolt on spacers, the studs on the spacers themselves are 12x1.5. He just needs short corn 12x1.25 lugs nuts to bolt the spacers to the hub and a set of 12x1.5 lug nuts

[cotbu]

Well that's why i asked him/her to think about it for a minute, vs replacing the studs.

[fliprayzin240sx]

Unless he has a big ass slip on spacer, but that still doesnt makes sense. All he'd need then is just a set of 12x1.5 lugs.

[cotbu]

If he/she bought the correct offset wheels, he/she wouldn't need spacers, or studs. Maybe new lug nuts if that, depending on the wheel design that is.😎

Sent from my Highly Tune Galaxy S3.4!!!