powahousealex
04-02-2014, 10:49 AM
http://i1070.photobucket.com/albums/u483/andallthisends/photo2.jpg
http://i1070.photobucket.com/albums/u483/andallthisends/Mobile%20Uploads/image-2.jpg
http://i1070.photobucket.com/albums/u483/andallthisends/Mobile%20Uploads/image-1.jpg
http://i1070.photobucket.com/albums/u483/andallthisends/Mobile%20Uploads/image.jpg
For sale is 95 240sx with a blacktop sr20det , comes with complete Freddy intercooler piping ,Megan racing bottom mount manifold,Megan racing elbow ,just changed the oil go 10w30 full synthetic ,also replaced the spark plugs on 2/09/14,engine runs healthy with no issues interior is mostly taken a part but do have some of the interior pieces , has a s13 as pasanger seat , does have dents and needs some paints
0 miles on the following
New 235/40/18 Nankang ns20 tires
5 lug hub conversions -new hubs -
Slotted and drilled 5 lug rotors +pads
New in box Megan racing motor mounts (not installed)
Megan racing tie rod ends
Megan racing rear lower toe arms
Megan racing rear upper control arms
Megan racing front high angle tension Rods
Megan racing rear lower traction rods
Wheels:
Ame circlar spec r 18x10 -15 offsett all around wrapped in brand new nankangs mentioned above. being bolted down by project kics r40 lugs black chrome (new)
Suspension :Megan racing street coilovers -miles unknown
Body :I have a complete uras type body kit I will include in the sale
Brand new advan carbon hood (Zenki )made in Los Angeles
Battery has been relocated to the back ,car was parked for some time as this was a slow build for me , drove it 2 miles and parked it again Car has some slight frame damage and does not have the front hitch , use hood pins to hold down the hood ,all the parts were installed at the same time ,car has not been aligned are had any of the arms adjusted to any specs , car comes with a welded differential as well , on the driver side is a bride zeta III
Looking for a quick sale , like I said Before , I installed all the parts at the same time , so all the parts are still new , just don't have the time to finish
I'm going to start my price @6.4k obo (please no insults as this price is not set in stone)
http://i1070.photobucket.com/albums/u483/andallthisends/Mobile%20Uploads/image-2.jpg
http://i1070.photobucket.com/albums/u483/andallthisends/Mobile%20Uploads/image-1.jpg
http://i1070.photobucket.com/albums/u483/andallthisends/Mobile%20Uploads/image.jpg
For sale is 95 240sx with a blacktop sr20det , comes with complete Freddy intercooler piping ,Megan racing bottom mount manifold,Megan racing elbow ,just changed the oil go 10w30 full synthetic ,also replaced the spark plugs on 2/09/14,engine runs healthy with no issues interior is mostly taken a part but do have some of the interior pieces , has a s13 as pasanger seat , does have dents and needs some paints
0 miles on the following
New 235/40/18 Nankang ns20 tires
5 lug hub conversions -new hubs -
Slotted and drilled 5 lug rotors +pads
New in box Megan racing motor mounts (not installed)
Megan racing tie rod ends
Megan racing rear lower toe arms
Megan racing rear upper control arms
Megan racing front high angle tension Rods
Megan racing rear lower traction rods
Wheels:
Ame circlar spec r 18x10 -15 offsett all around wrapped in brand new nankangs mentioned above. being bolted down by project kics r40 lugs black chrome (new)
Suspension :Megan racing street coilovers -miles unknown
Body :I have a complete uras type body kit I will include in the sale
Brand new advan carbon hood (Zenki )made in Los Angeles
Battery has been relocated to the back ,car was parked for some time as this was a slow build for me , drove it 2 miles and parked it again Car has some slight frame damage and does not have the front hitch , use hood pins to hold down the hood ,all the parts were installed at the same time ,car has not been aligned are had any of the arms adjusted to any specs , car comes with a welded differential as well , on the driver side is a bride zeta III
Looking for a quick sale , like I said Before , I installed all the parts at the same time , so all the parts are still new , just don't have the time to finish
I'm going to start my price @6.4k obo (please no insults as this price is not set in stone)