Anyway to get a boot over the Isis/Megan V2 short shifter?

[Feint Movement]

I have a Megan racing V2 shifter and am getting a bit of gear oil coming out the top of it. The B&M has a boot. Is there a way of getting a OEM boot over the bottom? The weight on the handle prevents me from sliding a boot over it, unless it unscrews? But im not sure.

[Chaluska]

I have a Megan racing V2 shifter and am getting a bit of gear oil coming out the top of it. The B&M has a boot. Is there a way of getting a OEM boot over the bottom? The weight on the handle prevents me from sliding a boot over it, unless it unscrews? But im not sure.

buy a new one??

http://www.ebay.com/itm/Nissan-240SX-S13-S14-S15-OEM-JDM-SR-KA-Manual-Transmission-Shift-Boot-/201046980054?pt=Motors_Car_Truck_Parts_Accessories&hash=item2ecf5575d6&vxp=mtr

I got mine off of the OE shifter by cutting the tip of the part around the shaft, and pulling it straight up

Fits over the V3 circuit sports shifter base

[Ka-t in progress]

I use a crown royal bottle bag

[Chaluska]

i think you misunderstood what OP was asking.

[90S13hatch_tony]

Its rubber!.... rubber stretches..
I bought a OEM one off frsport.com for mine.
For install I just rubbed a lil gear oil on the small top end and slipped it over, as for the bottom fat end, I used a metal zip tie to hold that sucker in place..easy peasy!

[fliprayzin240sx]

Yup, it stretches, force it on.

[gangster240]

There should be a c-clip right above the weight. Take of weight, slide boot on, place thin o-ring(rubber hair band) over shaft, slide weight on top of "band"(this will keep the weight from rattling). Place c-clip back on. Done

[eek]

I used this when I put in my Tomei shifter. You can slide it over the shifter with a lil help of grease or oil. I'm pretty sure this is the one everyone above me is referring to.

http://www.frsport.com/Nissan-32862-V5002-Genuine-OEM-Transmission-Rubber-Boot-Cover-KA24DE-SR20DET_p_8179.html

[240pimp]

Remove the c clip to remove the weight. Easy.