Help with SARD 550cc injectors

[Turboed240]

Okay. Does anyone have these things and know the CORRECT way to install them. It seems that no one can give me a straight answer. The o-rings that come on the injectors are too large to fit into the fuel rail. Can some please help me out!

[Bbandit]

Lube the o-rings. Use either grease, cooking oil, spit or something.
Twist - push, twist - push, twist -push.... rest for a bit.... repeat
Do this until the injectors sit in place.
Do not push them in using the metal caps onto the fuel rail.
Make sure the injectors sit pretty good in the fuel rail without any help from the metal caps.
Do this for all 4 injectors, If you cant feel your fingers after this install... you did it right and it wont leak.. :)

[element240]

petroleum jelly aka vaseline, work her in :naughtyd:

[Turboed240]

I tried lubin these things up and twistin/pushin. These things arent goin in. It looks like the o-ring that I had to take off my stock injector that goes on the top of the SARD is too large to allow the injector to go into the rail. Not to mention like I said that the middle o-ring that comes w/the injectors is too large to go into the cylinder. So I took the smaller stock o-ring off and tried that one and that one seems too small like it's not sealing. Im confused. Any other feedback on this??

[kcolyer27]

Go to google.com and type in sard and click images. That shold help

[Touring240]

sounds like your using the wrong size o rings. the o rings used on the stock injectors are not the same as the sard 550.

I have some sard 550cc which aren't installed yet because I'm waiting for the collar kit to arrive.