S14 with Overs Wheel Specs

[BlewByYou]

Hey guys I have 30mm front and 30mm rears

Looking to Add 18x9.5 fronts and 18x10.5 rears

What offset have you ran with this setup? Just getting an idea before i purchase a set of wheels

Car isn't slammed its going to be a time attack car. 255 fronts, 275 rears

Ive search havnt seen any with what im looking for!
Thanks.

[Rayne]

Wheel Offset Calculator (http://marksink.com/tire_wheel_offset/offset.html)

Wheel Fitment Questions Thread (http://zilvia.net/f/showthread.php?t=392494)

Wheel Fitment Whore Thread (Flush/stretched) (http://zilvia.net/f/showthread.php?t=129865)

Maxiumim Tire(Rubber) Fitment thread (http://zilvia.net/f/showthread.php?t=166563)

You will find your answer that you are seeking in any of the above three threads and play around with possible configurations with the Wheel offset calculator.

[brndck]

Ive search havnt seen any with what im looking for!
Thanks.

No. No you didn't. :sadwavey:

[zerodameaon]

No. No you didn't. :sadwavey:

I second this, if you had you would be posting in the proper thread, hell maybe you would have even answered your own question.

[pujishilus]

you had you would be posting in the proper thread, hell maybe you would have even answered your own question.http://goo.gl/oVU9zE

[BlewByYou]

Wheel Offset Calculator

Wheel Fitment Questions Thread

Wheel Fitment Whore Thread (Flush/stretched)

Maxiumim Tire(Rubber) Fitment thread

How does a wheel offset Calculator judge over fenders?

Wheel Fitment Whore Thread (Flush/stretched) This doesn't apply as nobody in that thread has the same setup as me!!

Again I've searched, I'm no noob, Just CURIOUS what peps have ran! That is all :)

[Mr.Doback]

Wheel Offset Calculator

Wheel Fitment Questions Thread

Wheel Fitment Whore Thread (Flush/stretched)

Maxiumim Tire(Rubber) Fitment thread

How does a wheel offset Calculator judge over fenders?

Wheel Fitment Whore Thread (Flush/stretched) This doesn't apply as nobody in that thread has the same setup as me!!

Again I've searched, I'm no noob, Just CURIOUS what peps have ran! That is all :)

No one is going to spoon feed you. We were all amateurs once and had to MEASURE.

Look through those threads, see the pictures, reference their wheel specs if posted, maybe the owners will even tell you more specifics. All in all, if you want 30mm or 50mm overs, tack that onto the specs you currently have. Your wheels will then be 30mm or 50mm more inset on the car with whatever overs you buy.

How to fix this problem of sunken wheels?

A. Larger lips if you have multi-piece wheels.
B. Spacers (:bash:)
C. Buy new wheels that have more aggressive offset/width.

If you choose to run a more aggressive wheel, that will require you to adjust tire size and camber (by adjusting your upper control arm).

[BlewByYou]

Im not looking to be spoon feed. Clearly my post wasnt read right. I was Curious.

I've already measured just seeing what "OTHERS" have done.


:cj:


For the love of God!

[BlewByYou]

These Threads are made for HELP. Ill make a asshole thread and we all post in that.

Now back on Topic, +15 Fronts, +20 Rears what my measurements came out too.

Im not buying xxr wheels and some shitty spacers my friend.

Spending $4500 on wheels means do you lil R&D.

[Martreb]

You have 1000+ posts you should know by now...

there will be absolutely no questions about wheel offsets on this forums without getting flamed.

[BlewByYou]

You have 1000+ posts you should know by now...

there will be absolutely no questions about wheel offsets on this forums without getting flamed.

Oh i know. But my post was no where near asking a stupid ass question like 90% of the time people post!

[brndck]

Yes. Yes it was. There are THOUSANDS of posts in the wheel fitment thread. PLENTY of chances to look and see what other people are doing/running, both with stock metal, and any assortment of overs that you can imagine.

[BlewByYou]

Yes. Yes it was. There are THOUSANDS of posts in the wheel fitment thread. PLENTY of chances to look and see what other people are doing/running, both with stock metal, and any assortment of overs that you can imagine.

Show me a Rocket Bunny Car with those specs and i will send you $10

:facepalm:

[Mr.Doback]

Im not looking to be spoon feed. Clearly my post wasnt read right. I was Curious.

I've already measured just seeing what "OTHERS" have done.


:cj:


For the love of God!

Those threads contain what "OTHERS" have done.

If you searched, you will find people have run 10.5 in the rear without overs.

$20 says you never order wheels, tires or any overs. If you were serious you would take the time to research before purchasing.

[BlewByYou]

Those threads contain what "OTHERS" have done.

If you searched, you will find people have run 10.5 in the rear without overs.

$20 says you never order wheels, tires or any overs. If you were serious you would take the time to research before purchasing.

Please check all my previous threads before making such remarks :D

Again i have overs so stock fitments isnt going to work for me. Im not looking for any hella flush bullshit, biggest wheel on stock body, stupid slam bc im gay bullshit..

reread my post if it applies to you then comment with your knowledge.

Your welcome to take it how you want!! good day

[zooopreme]

Show me a Rocket Bunny Car with those specs and i will send you $10

How about no.

Zilvia is not a place to be spoon fed. People here in this thread are really giving you solid advice. If you can't muster up simple addition/subtraction then you really shouldn't be messing around with cars.

I would love to break it down for a scrub like you but you're a complete moron and your responses deem you unworthy to be helped.

[BlewByYou]

How about no.

Zilvia is not a place to be spoon fed. People here in this thread are really giving you solid advice. If you can't muster up simple addition/subtraction then you really shouldn't be messing around with cars.

I would love to break it down for a scrub like you but you're a complete moron and your responses deem you unworthy to be helped.

This made no sense at all my man.

I posted what i measured. Im asking if someone with the same setup has something similar:sadwavey:

[zerodameaon]

Fuck, me, brndck, and zoopreme were telling you to post in the wheel fitment thread, which you would have found by SEARCHING...

[BlewByYou]

Fuck, me, brndck, and zoopreme were telling you to post in the wheel fitment thread, which you would have found by SEARCHING...


:mepoke: :dead:


http://ts2.mm.bing.net/th?id=HN.608051813106057765&pid=15.1

[zerodameaon]

Fine by us. BTW where did the R32 go, thought you were dumping your S14.

[fliprayzin240sx]

How about this for an idea? You look up what people are running on stock fenders, see what you like, since you're running 30mm fenders, calculate 30mm more poke for your new wheels. It's hard to come up with exact numbers for you since each company does their fenders differently. Just because they said 30mm doesnt mean its spot on 30mm. Then you throw in the fact that you bowing the rears in/out can your clearance.

Your other option would be install the fenders, take measurements and do your calculations for new wheels.

[BlewByYou]

+1^ Someone understands somewhat...........


It's all good I handled it.

[Rayne]

Wheel Offset Calculator

Wheel Fitment Questions Thread

Wheel Fitment Whore Thread (Flush/stretched)

Maxiumim Tire(Rubber) Fitment thread

How does a wheel offset Calculator judge over fenders?

Wheel Fitment Whore Thread (Flush/stretched) This doesn't apply as nobody in that thread has the same setup as me!!

Again I've searched, I'm no noob, Just CURIOUS what peps have ran! That is all :)

Let's see.

Here is a big spoonful of information for you.

Assuming you have actually used the offset calculator and are able to comprehend the information that is given back to you. You would know how the calculator deals with over fenders.

Here is an example for your noobiness.

If stock/current wheels are 9 inches wide and the offset is +15mm. A new set of 10.5inch wide wheels would need a +4mm offset to have the characteristics pasted below.
Your new wheel will have the following characteristics
The clearance from strut housing to the inside of the wheel will be 8mm LESS
The outside edge of the wheel will EXTEND an extra 30mm

I know you asked for what other people have run. So to help you along in your quest for an offset that will suit your fancy, I gave you links to threads that shows you what other people have used. Sure they may or may not have "Your" suspension set up or run over fenders like you are. However they are showing you how much clearance there is going to be in between the fender and the tire.

So you say you aren't a noob? Huh, post count doesn't mean anything other than you like to post a lot. Look at the join date of the other members that happen to post on the forum. "Fliprayzin240sx" has been with the site since 2002. "BrnDck" has been with the site since 2003. I have been with the site since 2005.