MaRshMaLLow
03-23-2014, 09:53 PM
As the title says .....
I have begun to part out my AE86 that i used in 2013 Formula D season and i'd like to start with selling my long block that i rebuilt last summer.
The motor has only been driven for 2 Formula D events ( Round 6 in Texas and Round 7 in Irwindale), 2 test days and 1 dyno day. I dyno'd the motor at 450whp and 397ft/lbs of torque with a GT2876R turbo and on E85. The engine is still currently installed in the car therefore you can verify that it runs well.
The long block will include the intake manifold and throttle body but no injectors and rail etc.
Engine SR20DET:
Bored out from 86mm to 87mm
CP pistons 10.5:1 compression ratio
Eagle Connecting rods
ARP rod bolts
ARP main bearing bolts (replaced during the rebuild)
ACL bearings (replaced during the rebuild)
S14 oil pick up tube (replaced during the rebuild)
OEM oil pump (replaced during the rebuild)
OEM timing chain and guides (replaced during the rebuild)
3 angle valve job on the head
Super tech valve guide seals (replaced during the rebuild)
Tomei valve springs
HKS 272 duration intake and exhaust cams
ARP head studs
Cometic head gasket
Moroso oil pan
The block and head has been decked and the compression ratio has been adjusted to 10.5:1 with the head gasket thickness .... yes this is a high comp set up and that is why i ran it on E85 to eliminate any type of detonation issues.
Here's the video of its last performance:
https://www.youtube.com/watch?v=GeEG7jDcpLQ
http://img.photobucket.com/albums/v509/jdmbooger/1186839_10151641042978907_1876737318_n_zpsc26aba5a .jpg (http://smg.photobucket.com/user/jdmbooger/media/1186839_10151641042978907_1876737318_n_zpsc26aba5a .jpg.html)
http://img.photobucket.com/albums/v509/jdmbooger/20130731_183543_zps4e0a2015.jpg (http://smg.photobucket.com/user/jdmbooger/media/20130731_183543_zps4e0a2015.jpg.html)
http://img.photobucket.com/albums/v509/jdmbooger/20130817_151329_zpsbf6a8a2f.jpg (http://smg.photobucket.com/user/jdmbooger/media/20130817_151329_zpsbf6a8a2f.jpg.html)
http://img.photobucket.com/albums/v509/jdmbooger/DKAR5046edited_zpsc1fb651a.jpg (http://smg.photobucket.com/user/jdmbooger/media/DKAR5046edited_zpsc1fb651a.jpg.html)
http://img.photobucket.com/albums/v509/jdmbooger/davidfdround12013fri-45_zps406b075d.jpg (http://smg.photobucket.com/user/jdmbooger/media/davidfdround12013fri-45_zps406b075d.jpg.html)
Asking price is $2000 ... not looking to ship, local pick up only. Located in Orange County CA
I have begun to part out my AE86 that i used in 2013 Formula D season and i'd like to start with selling my long block that i rebuilt last summer.
The motor has only been driven for 2 Formula D events ( Round 6 in Texas and Round 7 in Irwindale), 2 test days and 1 dyno day. I dyno'd the motor at 450whp and 397ft/lbs of torque with a GT2876R turbo and on E85. The engine is still currently installed in the car therefore you can verify that it runs well.
The long block will include the intake manifold and throttle body but no injectors and rail etc.
Engine SR20DET:
Bored out from 86mm to 87mm
CP pistons 10.5:1 compression ratio
Eagle Connecting rods
ARP rod bolts
ARP main bearing bolts (replaced during the rebuild)
ACL bearings (replaced during the rebuild)
S14 oil pick up tube (replaced during the rebuild)
OEM oil pump (replaced during the rebuild)
OEM timing chain and guides (replaced during the rebuild)
3 angle valve job on the head
Super tech valve guide seals (replaced during the rebuild)
Tomei valve springs
HKS 272 duration intake and exhaust cams
ARP head studs
Cometic head gasket
Moroso oil pan
The block and head has been decked and the compression ratio has been adjusted to 10.5:1 with the head gasket thickness .... yes this is a high comp set up and that is why i ran it on E85 to eliminate any type of detonation issues.
Here's the video of its last performance:
https://www.youtube.com/watch?v=GeEG7jDcpLQ
http://img.photobucket.com/albums/v509/jdmbooger/1186839_10151641042978907_1876737318_n_zpsc26aba5a .jpg (http://smg.photobucket.com/user/jdmbooger/media/1186839_10151641042978907_1876737318_n_zpsc26aba5a .jpg.html)
http://img.photobucket.com/albums/v509/jdmbooger/20130731_183543_zps4e0a2015.jpg (http://smg.photobucket.com/user/jdmbooger/media/20130731_183543_zps4e0a2015.jpg.html)
http://img.photobucket.com/albums/v509/jdmbooger/20130817_151329_zpsbf6a8a2f.jpg (http://smg.photobucket.com/user/jdmbooger/media/20130817_151329_zpsbf6a8a2f.jpg.html)
http://img.photobucket.com/albums/v509/jdmbooger/DKAR5046edited_zpsc1fb651a.jpg (http://smg.photobucket.com/user/jdmbooger/media/DKAR5046edited_zpsc1fb651a.jpg.html)
http://img.photobucket.com/albums/v509/jdmbooger/davidfdround12013fri-45_zps406b075d.jpg (http://smg.photobucket.com/user/jdmbooger/media/davidfdround12013fri-45_zps406b075d.jpg.html)
Asking price is $2000 ... not looking to ship, local pick up only. Located in Orange County CA