NEED HELP --> SR20DET

[fabrs13]

Hi! BTW, great page! I need some help please! I bought 3 months ago a 93' Nissan 200SX (RS13), with the CA18DET motor, well, w/o engine, the last owner blown the whole engine, I bought an SR20 red top, that is already installed, but it has a cut harness, I'm trying to adapt the CA's harness to my SR engine. The car is in poorly shape, I'm on the way to realive it!!! I red that the KA-E MAFS will work fine on my SR, is that true? Or can I use my CA's mafs on it? The same happends with the ignitor chip, it's tha CA's one, I hope will work with no problems on the SR20DET. My car was ATX, I swapped it to manual when I swapped the engine too. I bought the #62 ECU, is on the way hehe,
Now, I'm with no money, I have to buy lots of stuff yet...but I hope to have my car runing in a couple of months. I have some troubles with the air hoses in the engine, I don't know where they go. My car is really causing me a headache :bash: i need it running ASAP, I need it to go to the college everyday. I hope some of you help me! From Caracas-Venezuela. THANX!

Fabio G.
6/15/2004

[Pepperoni]

I red that the KA-E MAFS will work fine on my SR, is that true? Or can I use my CA's mafs on it?

Yes, you can use the KA24E MAF. I'm not sure about the CA MAF though.

The same happends with the ignitor chip, it's tha CA's one, I hope will work with no problems on the SR20DET.

I'm not sure again about the CA. I know that a '96+ Infiniti Q-45 ignitor chip should be the same as the one from your SR.

[BuudWeizErr]

I know someone with a CA ignitor chip on his SR, so I know it can be done. Find the pinout diagram for it and you should be able to adapt it.

[fabrs13]

Thanks a lot guys! I'll let you know how my project is going! Thanks again. Take care!

Fabio G.
6/15/04