Frankiejay420
03-18-2014, 04:57 PM
Ka24e to ka24de swap, has fuel but not getting spark.. 12 volts to the coil but nothing coming out.. what could it possible be? the ECU I got from the guy two weeks later hoping he didn't drop it or anything..
68277
68268
68269
I did re pin the dash connector, water temp, tech, speedometer, a/c, ignition start signal and grounded the black wire to two ground wires from the actual plug..
68270
68271
68273
68274
68275
68276
Even bought another coil thinking the first one I just bought was a bad coil, should I try swapping ECU's? How can I use my DMM and test the dizzy? or CAS? Module? I know ima need to swap the tach if I want it to work, or do I need a dohc tach to complete the circuit or something because I see that same wire (tach) runs to the relay by my coil doesn't the coil have a pulse? well this is my first swap so bare with me please.. been searching and searching and seem to not find much..
68272
68277
68268
68269
I did re pin the dash connector, water temp, tech, speedometer, a/c, ignition start signal and grounded the black wire to two ground wires from the actual plug..
68270
68271
68273
68274
68275
68276
Even bought another coil thinking the first one I just bought was a bad coil, should I try swapping ECU's? How can I use my DMM and test the dizzy? or CAS? Module? I know ima need to swap the tach if I want it to work, or do I need a dohc tach to complete the circuit or something because I see that same wire (tach) runs to the relay by my coil doesn't the coil have a pulse? well this is my first swap so bare with me please.. been searching and searching and seem to not find much..
68272