1jz swapped Sc300 Part out. GReddy, Apexi, ACT, Blitz, Stern 19' wheels, Lots of part

[BNASTYs13]

Parting out my 1992 sc300 with 1jz swap. Car made 340whp at National speed several years ago. Swap has about 70k miles on it and still runs strong. The car is parted out now so do not ask if I will sell the whole car. I am not selling the shell complete. I am parting it out. Let me know what parts you want from it. I will pull anything you need off it.



complete 1jz swap engine with harness, ecu, turbos, sensors, manifolds, injectors, p/s pump, alternator, starter, a/c, custom intake, down pipe etc. Every but the transmission, flywheel, and clutch. The engine was pulled from a strong running car but has a burnt valve on cylinder number 2- 700 picked up. Will part out.



Test pipe- 40

Front mount intercooler kit with all piping and Blitz dual drive bov- 350

Apexi boost gauge- 50 (no harness for light)

Rear Lip and Side skirts- 180. One of the skirts needs a small repair.

Momo steering wheel with adapter- 120

Good battery- 40

Wheels are sold, suspension is sold, exhaust is sold. boost controller and safc are sold





http://i168.photobucket.com/albums/u191/srkelly/00000_6Dg4ykMCvbA_600x450_zpsffbb348b.jpg (http://s168.photobucket.com/user/srkelly/media/00000_6Dg4ykMCvbA_600x450_zpsffbb348b.jpg.html)



http://i168.photobucket.com/albums/u191/srkelly/00d0d_4v3rTamnNOa_600x450_zpsbb6ab355.jpg (http://s168.photobucket.com/user/srkelly/media/00d0d_4v3rTamnNOa_600x450_zpsbb6ab355.jpg.html)


http://i168.photobucket.com/albums/u191/srkelly/00U0U_6fZs5z1bxNB_600x450_zps79fa4f20.jpg (http://s168.photobucket.com/user/srkelly/media/00U0U_6fZs5z1bxNB_600x450_zps79fa4f20.jpg.html)




http://i168.photobucket.com/albums/u191/srkelly/00R0R_1bxkUUImr1G_600x450s_zpscf7cfc4e.jpg (http://s168.photobucket.com/user/srkelly/media/00R0R_1bxkUUImr1G_600x450s_zpscf7cfc4e.jpg.html)



http://i168.photobucket.com/albums/u191/srkelly/00B0B_iI7RmIcDIgZ_600x450_zpsc7208957.jpg (http://s168.photobucket.com/user/srkelly/media/00B0B_iI7RmIcDIgZ_600x450_zpsc7208957.jpg.html)


http://i168.photobucket.com/albums/u191/srkelly/image_zps3c9f0e26.jpeg (http://s168.photobucket.com/user/srkelly/media/image_zps3c9f0e26.jpeg.html)



http://i168.photobucket.com/albums/u191/srkelly/image1_zpsca2e3e4d.jpeg (http://s168.photobucket.com/user/srkelly/media/image1_zpsca2e3e4d.jpeg.html)




http://i168.photobucket.com/albums/u191/srkelly/image2_zps8e372542.jpeg (http://s168.photobucket.com/user/srkelly/media/image2_zps8e372542.jpeg.html)


http://i168.photobucket.com/albums/u191/srkelly/00k0k_cT2JCHspcnl_600x450_zpse2ffcbf6.jpg (http://s168.photobucket.com/user/srkelly/media/00k0k_cT2JCHspcnl_600x450_zpse2ffcbf6.jpg.html)




Videos!!!!

http://www.youtube.com/watch?v=nmtfV...Mybjbw&index=5

http://www.youtube.com/watch?v=QE7Ox...dBgp8f--Mybjbw

[BNASTYs13]

Bump I know some of you schassis guys can use some of these parts. Spread the word to SC friends

[conrad_s13.5]

SAFC forsale too?

[Boostin_AWD]

Lmk if you'll part the flywheel and clutch.

[BNASTYs13]

sorry safc is sold now. I do not want to part the clutch and fw yet. Also just did a leak down and number 2 cyl is low. I think it has a stuck valve since i can hear the air coming out of the exhaust manifold. I doubt it is bent since 1js are non interference motors.

I would be willing to sell the engine for pretty cheap. Perfect for a build.

[bmitchell_ga]

pm sent on boost controller

[1jz s14]

Coilovers?

[irocznissan]

How's the interior

[BNASTYs13]

interior is pretty bad what do you need?

Boost controller is now sold sorry :(

Coilovers sold sorry :(

[Jdmfreak078]

How much for the engine ?


Sent from my iPhone using Tapatalk

[BNASTYs13]

I would take 350 for the long block

[BNASTYs13]

wheels are now sold and so is exhaust.

[ORkouki]

Do you have a r154 to 1jz bellhousing?