AEM-Tarox-Wilwood-Hotchkis-Racepak-HKS-Votion-ISIS-Mazworx-WedsSport-TONS MORE!!!

[Imarvin240]

Okay, So I have been building my SR22VE-T for the past few years and counting , with the help of Touge Factory. These are all the parts that so far are not going on the car and/or didn't end up being needed for the build. A lot are new and some are used. I will add to the pictures/parts as I get time to take some pictures and list more. IF IT'S NOT LISTED, I'M NOT SELLING IT! I will except money...no trades. Prices are firm unless otherwise stated!

AEM Methanol Injection kit with (AEM fiilter not sold with a kit) 5 Gallon and 1 Gallon Tank
- BRAND NEW IN BOX!
-$500
https://scontent-a-iad.xx.fbcdn.net/hphotos-prn2/t1.0-9/1496608_10152396210886754_973252925_n.jpg

S-Max Power Steering Reservoir - SOLD!
- BRAND NEW IN BOX!
- $150
https://scontent-b-iad.xx.fbcdn.net/hphotos-frc3/t1.0-9/291987_10151193606376754_174595965_n.jpg

S-Max Coolant Expansion Tank - SOLD!
- BRAND NEW IN BOX!
- $75
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/t1.0-9/260580_10151193615346754_508216595_n.jpg

WedsSport SA-55M 18x9 + 20 and 18x10 +18 (5x114.3) with Center Caps
- BRAND NEW IN BOX!
- $1,750
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash2/t1/393733_10150543522541754_763549644_n.jpg

Hydraulic E-Brake with Wilwood Master
- BRAND NEW IN BOX!
$150
https://scontent-a-iad.xx.fbcdn.net/hphotos-ash3/t1.0-9/1939865_10152396179226754_1046840857_n.jpg

Mazworx VVL Solenoid Block with Lines - SOLD!
- BRAND NEW IN BOX!
- $75
https://scontent-b-iad.xx.fbcdn.net/hphotos-prn1/t1.0-9/1907585_10152396179166754_1960271572_n.jpg

HKS EVC VI Boost Controller
- BRAND NEW IN BOX!
- $525 (Retail: ~$700)
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/63945_10151600611856754_600813697_n.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/580292_10151600611701754_1562084525_n.jpg
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/216622_10151600611561754_5438022_n.jpg

Tarox B27-6 piston E-Brake Caliper for 24mm rotors with Lines (will need custom mounting bracket)
- BRAND NEW IN BOX!
- $250
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/574947_10151179252626754_410597425_n.jpg

RacePak Vnet EFI Interface Module for AEM
- This allows you to hook up an AEM ecu to a RacePak cluster
- BRAND NEW IN BOX!
- $300 (Retail: ~$375)
https://scontent-a-lga.xx.fbcdn.net/hphotos-ash3/395178_10150621142321754_1428113176_n.jpg

Votion Liquid to Air Intercooler Kit (Custom order...not sold as a kit)
- Capable of supporting up to 1000+hp
- BRAND NEW IN BOX!
- Kit includes: 26X7X3.5 Heat Exchanger, Fill Cap, Ice Box, Bosch pump, Dual 7" fans, 15X6.5X6 Long Flow Intercooler
- $750
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/305711_10150422775761754_591131990_n.jpg

SR Timing Chain Tensioner
- ~3k miles
- Perfect Shape
- $50
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/420668_10150723302656754_1773963129_n.jpg

ISIS Oil Pan
- Mounted Only/Never Used
- $100
Picture Soon!

SR20 Oil Pump Gear and Rear Pump Cover
- Never Used!
- $50
https://scontent-a-iad.xx.fbcdn.net/hphotos-prn2/t1.0-9/10003475_10152406934171754_402843382_n.jpg

Cam Angle Sensor Gasket and O-ring
- Perfect Shape
- $5
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/582127_10151117824941754_1095955387_n.jpg

Intake and Exhaust Cam Gear Bolts
- PERFECT SHAPE!
- $3 each
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/389608_10150742104266754_230685035_n.jpg

SR20 Head Bolts
- Used
- $15
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/391521_10151117825236754_1233010837_n.jpg

KU Engineering Style S13 Intake Manifold
- Never Used (just sitting around for about 3yrs, but the last owner drilled injector port 1 larger to put larger injectors in but then sold it to me...costs about 60 to do it to the other 3 or 40 to correct port 1)
- $100
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/387242_10150480663521754_731518754_n.jpg

SR20 Upper Oil Pan - SOLD!
SR20 Oil Pump - SOLD!
SR20 Oil Screens (2 sets)
SR20 Rear Crank Case Cover (4)
SR20 Oil Block Galley w/ Sensor - SOLD!
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/396250_10150613024401754_747358470_n.jpg

SR Main Cap Girdle
- PERFECT SHAPE
- $15 each
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/533372_10150834795496754_1356505300_n.jpg

SR Coolant Tubes - $20
SR Short Coolant Tubes - $5
SR Temp. Sensor Housing - $10
SR Thermostat Housing - $10
SR Coolant Inlet - $10
SR Coolant Complete Setup w/ Sensors - $45
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/527221_10151118980776754_1330060689_n.jpg

OEM SR20VE P11 Valvetrain (IN+EX Valves, Springs, Cams, Gears)
- 15,000 Miles
- PERFECT!
- Valves - SOLD!
Springs - $25
Retainers - $15
Camshafts - $50
Gears - SOLD!
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/419996_10150615750161754_2034185802_n.jpg

SR20DET AAC Valve
- PERFECT SHAPE
- $30
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/268390_10151117824486754_1518170587_n.jpg

S14 SR Valve Cover w/ Coil Pack Cover
- Perfect Shape
- $160
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/483292_10151117806246754_1759643063_n.jpg

stock KA24de airbox intake system and Filter is still clean (came from a 98' kouki)
- PERFECT SHAPE
- $50
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/395569_10150613036421754_1842248499_n.jpg

S13 Non-ABS Driveshaft - Pick up only
- Used
- $90
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/251844_10150996375441754_1255838261_n.jpg

S13 SR Transmision - Pick up only
- Roughly 30k miles
- PERFECT SHAPE
- $125
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/581233_10150834790411754_526896753_11628495_953830 84_n.jpg

S13 SR Nismo Transmission Mount - SOLD!
- Used
- $60
https://scontent-b-lga.xx.fbcdn.net/hphotos-prn1/148677_10151381199301754_1841440434_n.jpg

S13 SR Bell Housing
- No cracks
- $40
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/564085_10151117824271754_656643891_n.jpg

S13 SR release bearing
- Good Condition
- $10
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/s720x720/563891_10151117807086754_1542660424_n.jpg

S13 SR Clutch Fork
- Perfect Shape
- $20
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/547715_10151117810956754_1522119873_n.jpg

SR20 Timing Chain guide
- Perfect Shape
- $10
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/208835_10151117803836754_1132037713_n.jpg

S13 SR Valve Cover Baffeling
- Great Shape
- $10
https://scontent-a-lga.xx.fbcdn.net/hphotos-prn2/205392_10151117824711754_230142896_n.jpg

SR20 Coilpack Gaskets
- NEW
- $3 each
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/306862_10151117804861754_635118492_n.jpg

S13 SR20 Intake Gasket
- PERFECT SHAPE
- $10
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc1/578087_10150996378901754_1024923681_n.jpg

S13 SR20 Valve Cover Gasket
- Perfect Shape
- $15
http://sphotos.xx.fbcdn.net/hphotos-ash3/179381_10150996377131754_633498064_n.jpg

Injector Gasket O-rings
- Perfect Shape
- $3 each
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/531730_10151117835861754_1774072589_n.jpg

SR20 Rear Main Seal
- New In Box
- $18
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/575117_10151600690261754_2113978335_n.jpg

(8) SR20 Hydraulic Lifters
- Perfect Shape
- $5 each
https://scontent-a-lga.xx.fbcdn.net/hphotos-ash2/482040_10151117834446754_1000631996_n.jpg

Megan Racing SR T3/T4 Exhaust Manifold
- NEVER USED
- $90
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/209001_10151600690071754_1741953076_n.jpg

SR OEM Exhaust Manifold
- Perfect Shape
- $40
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/558022_10151117809826754_1698690365_n.jpg

SR20det Exhaust Gaskets (t3, T4, Exhaust mani)
- Perfect Shape
- $20
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/387004_10151117825516754_1915179614_n.jpg

Crank Pulley Bolts (2)
-Perfect Shape
-$5
https://scontent-a-lga.xx.fbcdn.net/hphotos-ash2/430968_10150664145311754_1857571698_n.jpg

Transmission Mount Brackets
- Perfect Shape
- $15 each
http://sphotos.xx.fbcdn.net/hphotos-ash4/401191_10150664161831754_526896753_11067931_429516 216_n.jpg

Alternator Brackets
- Perfect Shape
- $20 each
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/432308_10150664167686754_1046513063_n.jpg

Knock Sensor (4)...one doesn't have a sub-harness
- Perfect Shape
-$25 each (15 for the one without the sub-harness)
http://sphotos.xx.fbcdn.net/hphotos-ash4/419805_10150664174196754_526896753_11067961_194880 5439_n.jpg

Godspeed Arm - $15
S13 Rear Links - $10 each
S13 Front Lower Control Arm - $30
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/527865_10150834796161754_526896753_11628506_861054 377_n.jpg

(2) o2 Sensor Simulator
- one was touched with dirty hands, then I put on gloves
- NEW IN BOX
- $33 (each)
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/599368_10151600690386754_955153327_n.jpg

[Imarvin240]

\/ \/ \/ 350Z PARTS \/ \/ \/

350z OEM Hatch w/ Glass
- Perfect Shape
- $300
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc3/1382009_10152052232511754_1443002276_n.jpg

350z OEM Hood and Doors
- Perfect Shape
- $250 (HOOD)
- $300 (DOORS)
https://scontent-a-lga.xx.fbcdn.net/hphotos-ash3/228558_10150228263471754_4201531_n.jpg

350z Core Support
- Perfect Shape
- $150
https://scontent-b-iad.xx.fbcdn.net/hphotos-frc3/t1.0-9/419029_10150614367566754_371548961_n.jpg

350z OEM Fenders
- Perfect Shape
- $150
https://scontent-a-lga.xx.fbcdn.net/hphotos-ash2/226345_10150228258731754_1528519_n.jpg

350z Door Panels
- Great Shape!
- $100
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/t1.0-9/r180/1959805_10152406934116754_1125838570_n.jpg
https://scontent-b-iad.xx.fbcdn.net/hphotos-prn2/t1.0-9/r270/1978871_10152406934246754_2142523544_n.jpg

350z Eibach Sway Bars (front and Rear)
- Great Shape!
- $300
https://scontent-a-iad.xx.fbcdn.net/hphotos-prn1/t1.0-9/10009792_10152406934031754_1524760542_n.jpg

350z Dust Shields
- Great Shape
- $30
https://scontent-a-iad.xx.fbcdn.net/hphotos-ash3/t1.0-9/r90/999973_10152406934051754_1183485003_n.jpg

350z Axles
- Perfect Shape (using Driveshaft Shope Stage 5 Axles Now)
- $150
https://scontent-b-iad.xx.fbcdn.net/hphotos-prn1/t1.0-9/r270/1016982_10152406933986754_1682860887_n.jpg

350z OEM CD009 Transmission Gears (I switched to OS Giken Gears)
- Perfect Shape -15k Miles
- $350
https://scontent-a-iad.xx.fbcdn.net/hphotos-frc3/r270/1476720_10152205403361754_26616233_n.jpg

350z Master 1 1/16th
- Perfect Shape
- $45
https://scontent-a-lga.xx.fbcdn.net/hphotos-ash2/311300_10150480660336754_1841691997_n.jpg

350z Brake Booster
- Perfect Shape
- $100
https://scontent-b-lga.xx.fbcdn.net/hphotos-ash4/375534_10150480661776754_1407163513_n.jpg

350z Arms
- Perfect Shape
- $50
https://scontent-a-lga.xx.fbcdn.net/hphotos-frc1/599355_10151600690176754_109048192_n.jpg

350z 03' tinted tail lights
- Great shape
- $75
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/296301_10150443557066754_891397841_n.jpg

350z 04' Head Lights
- Great Shape
- $75
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/10013078_10152396179091754_495857632_n.jpg



These are all the make an offer items...i dont want or need them so just make an offer...pictures of these upon request.

\/ \/ \/ 2005 WRX (less then 20k miles on items)\/ \/ \/

OEM Air Box Setup
OEM Downpipe
OEM Full Exhaust
OEM Uppipe
OEM Turbo Heat shield

\/ \/ \/ Auto 200SX SER Engine Part Out \/ \/ \/

Head (currently has valves, springs, retainers, and keepers but can remove if buy requests)
Rocker arms
Oil tubes in SR head
Intake and Exhaust cam gears
Valve Cover
EGR valve (in WORKING order)
distributer (in WORKING order)
Headers
Injectors w/ Fuel rail
Intake Manifold (perfect Condition w/ all connectors and hoses)
(3) Pistons
(3) Rods
Water Pump
Water Pump pulley
oil filter block
crank pulley
Coolant tubes
Coolant outlet
Lower Oil Pan
Oil Pan baffling
Timing chain tensioner
Flex Plate
Auto trans gasket
Alternator bracket
intake bracket
power steering bracket
ac bracket
Auto 200sx Engine Harness (completely uncut)
injector harness
tps (throttle position sensor)

Thank You For Looking!

[d_nice]

damn good parts here.

[SidewayzAsFck]

Sr20 oil pump (one never used) I saw two listed one was sold. Idk if you were just showing that it sound or u have two and one sold. Shoot me pm

[DirtySanchez096]

pmed about trans mount

[Drakkar]

I'll grab some sr lifters off of you. You have a full set? Shipped 03087 6035482165

[brndck]

is that hydro for inline or is it separate reservoir?

[yfz460]

Sent a pm a few days ago regarding some parts.

[libtech240sx]

Do you have fittings for s-max reservoirs? Can you PM me back please and thanks!


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[gadberry2009]

Interested in Megan manifold. Pm me your number please

[Martino]

Sent you a PM.

[drumnbasslvr]

hello I would like the sr coolant tubes, I am referring to the item in dead center of the pic of multiple coolant lines. also would like the idle air line which is not labeled right but is in the top right of that same pic. lastly would like a knock sensor with its harness. all items for sr20det s13 version. pm me with your shipped price.

[Imarvin240]

All messages have been answered and more parts/pics added.

[Blue91hatch]

Interested in the coolant expansion tank,intake gasket, valve cover gasket, plug well gaskets and exhaust manifold gasket shipped to 52314, pm me a price, I have PayPal ready lol

[EatRice]

PM-ed this guy like 3-4 days ago... ?!?! trying to send him money? dafuq lol

[PoorMans180SX]

You have a PM good sir.

[Blue91hatch]

Were you referring to me getting a pm for the parts I asked about? Cause I still don't have one

[speedgod^s13]

Were you referring to me getting a pm for the parts I asked about? Cause I still don't have one

He sent a pm to the seller, is what he meant.

[Blue91hatch]

Oh haha duh, just looked
Really quick and didn't notice who posted that, still interested in those parts though!

[S14tyger]

Can i grab the vvl lifters and rockers? Need them asap, text 7046987058

[sr20luv]

Payment sent for cam gears

[1jz s14 zenki]

whats up with that 350z? lol for sale?

[Imarvin240]

whats up with that 350z? lol for sale?

not for sale, it's being built.
http://zilvia.net/f/showthread.php?t=420428


Lots of parts have been sold and shipped and a few more are currently pending.

[801nismo104]

are the mazworx vvl solenoid block and lines still for sale?
whats your bottom dollar price shipped to 84044?

[510skater]

PM'd you about the oil pan