carpetmuncher95
03-17-2014, 02:57 PM
For trade/sale is a built motor Rb25det S14.
My father and I started building this car in 2010. It was a father and son project that we put time and money into. My father passed away last year right before we made the car road worthy. I finished up what needed to be done to drive and enjoy the car and since have been doing some work to it when I have had time. Unfortunately, it's just not the same to work on and drive the car without my father and I have lost interest in something that was once a lot of fun to be around and drive. I'm sure it's hard for many people to understand but that's where I am with the car and the reason I am selling it.
I have went back and forth with keeping it and storing it but that would do the car no good and with the work that is in it, it would benefit many other people.
Motor is built w/
-Manley rods
-Weisco Pistons
-ARP rod,main and head studs
-Raw Brokerage Crank collar
-Block oil restrictors
-Isis intake manifold
-Cosworth headgasket
-Tomei Timing belt
-New oem water pump and oil pump
-Arp idler pulley stud
-New oem crank pulley
-Custom mid mount intercooler set up
-Wiring specialties wiring harness
-FAL slim fans
-Mishimoto Radiator
-Failsafe AEM wideband gauge
-AEM digital electronic oil pressure guage
-Act full face clutch
-Resurfaced flywheel
-Mckinney mount kit
-Mckinney driveshaft
-Mckinney down pipe
-Arp extended studs with new open end lug nuts
-Lowering springs and shocks(installed)/NEW BC racing coilovers (not installed)
-Agency power brake lines(rear installed, front not installed)
-Welded diff(not installed)
-Interior is as close to mint and you will find with an s14
BMS Racing Engines of Plymouth Meeting, PA , which is a well known machine/race car motor builder, built the motor with the parts I supplied them with.
OneMotion Fabrication built the intercooler and piping.
Car is running stock turbo and stock throttle body and stock computer. Turbo does have new braided lines. All gaskets and o-rings are new. Many small parts have been replaced too.
Car idles at 750-800 and is almost dead on at 14.7 afr at idle.
Working power steeering!
All parts were purchased new. Due to my fathers passing, I no longer have the receipts for many items but have many photos to show all of the parts that were installed and bought. Many people on here and around the 240 scene can vouch for me, this car and the build. For serios buyers I will list references to talk to. I have photos of almost every process, including the build.
Body of car does need paint and some body work but nothing serious. A few spots that were already started to get the body in shape that need to be finished up and a few door dings. Body is multi colored because I bought panels that were in better shape than what I had on there.
I live near Philadelphia and can show car to serious buyers. Title in hand.
Message me for more information or if you're interested.
Thanks
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/B5196875-1687-41CB-88DC-A86E68B769C9.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/B5196875-1687-41CB-88DC-A86E68B769C9.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/liberty.jpg (http://s698.photobucket.com/user/paphilly215/media/liberty.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0099.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0099.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_1452.jpg (
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_1452.jpg)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0946.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0946.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0941.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0941.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/575F73F4-70D0-46A8-B792-84145616F2EC.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/575F73F4-70D0-46A8-B792-84145616F2EC.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/IMG_0204.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/IMG_0204.jpg.html)
My father and I started building this car in 2010. It was a father and son project that we put time and money into. My father passed away last year right before we made the car road worthy. I finished up what needed to be done to drive and enjoy the car and since have been doing some work to it when I have had time. Unfortunately, it's just not the same to work on and drive the car without my father and I have lost interest in something that was once a lot of fun to be around and drive. I'm sure it's hard for many people to understand but that's where I am with the car and the reason I am selling it.
I have went back and forth with keeping it and storing it but that would do the car no good and with the work that is in it, it would benefit many other people.
Motor is built w/
-Manley rods
-Weisco Pistons
-ARP rod,main and head studs
-Raw Brokerage Crank collar
-Block oil restrictors
-Isis intake manifold
-Cosworth headgasket
-Tomei Timing belt
-New oem water pump and oil pump
-Arp idler pulley stud
-New oem crank pulley
-Custom mid mount intercooler set up
-Wiring specialties wiring harness
-FAL slim fans
-Mishimoto Radiator
-Failsafe AEM wideband gauge
-AEM digital electronic oil pressure guage
-Act full face clutch
-Resurfaced flywheel
-Mckinney mount kit
-Mckinney driveshaft
-Mckinney down pipe
-Arp extended studs with new open end lug nuts
-Lowering springs and shocks(installed)/NEW BC racing coilovers (not installed)
-Agency power brake lines(rear installed, front not installed)
-Welded diff(not installed)
-Interior is as close to mint and you will find with an s14
BMS Racing Engines of Plymouth Meeting, PA , which is a well known machine/race car motor builder, built the motor with the parts I supplied them with.
OneMotion Fabrication built the intercooler and piping.
Car is running stock turbo and stock throttle body and stock computer. Turbo does have new braided lines. All gaskets and o-rings are new. Many small parts have been replaced too.
Car idles at 750-800 and is almost dead on at 14.7 afr at idle.
Working power steeering!
All parts were purchased new. Due to my fathers passing, I no longer have the receipts for many items but have many photos to show all of the parts that were installed and bought. Many people on here and around the 240 scene can vouch for me, this car and the build. For serios buyers I will list references to talk to. I have photos of almost every process, including the build.
Body of car does need paint and some body work but nothing serious. A few spots that were already started to get the body in shape that need to be finished up and a few door dings. Body is multi colored because I bought panels that were in better shape than what I had on there.
I live near Philadelphia and can show car to serious buyers. Title in hand.
Message me for more information or if you're interested.
Thanks
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/B5196875-1687-41CB-88DC-A86E68B769C9.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/B5196875-1687-41CB-88DC-A86E68B769C9.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/liberty.jpg (http://s698.photobucket.com/user/paphilly215/media/liberty.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0099.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0099.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_1452.jpg (
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_1452.jpg)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0946.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0946.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0941.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/95%20Rb25%20s14%20build/IMG_0941.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/575F73F4-70D0-46A8-B792-84145616F2EC.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/575F73F4-70D0-46A8-B792-84145616F2EC.jpg.html)
http://i698.photobucket.com/albums/vv342/paphilly215/95%20240sx%20rb25%20build/IMG_0204.jpg (http://s698.photobucket.com/user/paphilly215/media/95%20240sx%20rb25%20build/IMG_0204.jpg.html)