FS: RB26 blocks, 88mm Tomei piston, ported heads..etc

[C-unit]

I have a bunch of RB26 parts that you can put together. I am only selling as a package so let me know if you are interested.

All parts are machined, cleaned and ready to go.
- RB26 block, 88mm bore, decked
- RB26 block, 87mm bore. decked
- RB26 head, 5angle valve cut, intake/exhaust ported, decked
- Tomei 88mm piston with stock rods
- stock rods and stock piston
- stock cams x2
- stock valves cut for the machined head
- stock valve spring and retainer
- Jun valve spring and Ti retariner
- R34 crankshaft machined and polished
- R32 crankshaft with jun crank collar. machined and polished
- R32 crankshaft, machined and ready for crank collar
- Greddy 88mm headgasket
- OEM headstuds 1 set

I am asking $4600 for everything. Machining alone for all parts are 2000 already.

I am not looking to part so please don't ask. I am located in Richmond BC which is 30mins away from WA border.

Please click the link for detail pictures.
http://s214.photobucket.com/user/GenerisLabo/library/?view=recent&page=1

https://scontent-a-sea.xx.fbcdn.net/hphotos-frc1/t1.0-9/1907559_406720042798177_1831842605_n.jpg

[BB4rank]

clean stuff wish i had the funds. not too far for me either. does it come with all hardware to button up the longblock?

[Cubantunr]

That's a steal!

Sent from my SCH-I545 using Tapatalk

[blank240]

Damn if only it came with wiring ect ect..I would pick this up. If you do part lmk I'm interested in a lot of parts...


Sent from my iPhone using Tapatalk

[C-unit]

clean stuff wish i had the funds. not too far for me either. does it come with all hardware to button up the longblock?

All the hardwares are there but they are stock. I would prefer to use ARP parts. Cam caps are also bolted onto the head right now and they are matching ones from the factory.


Damn if only it came with wiring ect ect..I would pick this up. If you do part lmk I'm interested in a lot of parts...


Sent from my iPhone using Tapatalk


If wiring is the only part you need to make the deal, yes, I can throw one in for you with a Mine's tune ECU as well.

[BB4rank]

How about oil pump, crank girdle, main caps, rear crank seal, oil sandwich block, valve covers? What happened with the intake manifold and exhaust/turbos?

[C-unit]

How about oil pump, crank girdle, main caps, rear crank seal, oil sandwich block, valve covers? What happened with the intake manifold and exhaust/turbos?

crank gridle, main caps are all there with the block. But pretty whatever is listed on the post are the parts that I have. These are the parts from my abandon project which i lost interest in.

[blank240]

All the hardwares are there but they are stock. I would prefer to use ARP parts. Cam caps are also bolted onto the head right now and they are matching ones from the factory.











If wiring is the only part you need to make the deal, yes, I can throw one in for you with a Mine's tune ECU as well.


The thing is I would need like the cas, knock sensor, tps, intake ect ect. Doing a rb26 swap but I would just rather buy it all together instead of sourcing it out from different places/people. Plus I don't need the extra crank, blocks ect...I'll just keep looking


Sent from my iPhone using Tapatalk

[GRNxS14]

Would you be willing to sell me the set of stock rods and pistons seperately? The oem pistons won't work with either of those blocks so I'm sure any potential buyer isn't interested in those with the package anyways. Let me know, thanks

[C-unit]

PM'ed

msglnth

[C-unit]

Bump Bump Bump

[BlewByYou]

Bump for some Amazing Parts.

[C-unit]

need these gone.

[Sforteen]

would you sell just a crankshaft?

[C-unit]

all cranks were sold.

[R33matt]

What parts are left

[DJDANGER24]

What parts are left

What he said ^^^