wtb 1996 s14 5-speed swap

[Ariel_pantoja]

looking for any parts to swap my auto s14 to manual.

I need:
95-96 ecu
5-speed transmission from an S14
5-speed Drive shaft front and rear sections (this may differ if you have ABS/LSD)
Flywheel*(new or resurfaced) M/T*flywheel*bolts
Shifter assembly (plate, lower rubber boot, upper leather boot, finisher plate)
5-speed Cross member
Clutch Master cylinder
Clutch Slave cylinder
Clutch hardlines
Clutch rubber line and dampener line
Clutch pedal assembly
5-Speed*Brake*pedal*assembly or a cut*brake*pedal
Bellhousing bolts for a 5 speed bellhousing
Bolts to hold Pressure Plate to*Flywheel*(same thread as bolts that hold shifter to transmission, but a tad shorter)

[Bernie (NoVA)]

I have all of this in the Washington DC area.
Off the car and ready to pick up.

FWIW the PP to flywheel bolts are grade 9 or harder, common finish/interior hardware should not be used as it will fail.