PDA

View Full Version : FL Rhd zenki 180sx part out


Chopsuey
03-03-2014, 09:31 AM
Hate that I have to do this but my chassis just has too rust and I'm tired of chasing it down n investing into something that's going to spend most of it's life under a welder. I'm located in the Cayman Islands so my parts will only be shipped when they're taken up to Miami in about 2 weeks. All parts will have shipping included and priced accordingly. Larger items such as 180sx 1/4 glass will have to be shipped from here but my prices will be fair. I'd rather make $10 off them than toss them since there's no one local to use them. Any who here's the list. Pics will be posted later today.

Circuit sports inner and outer tie rods fits both s13/s14 asking $100 shipped for everything 0 miles only installed

Circuit sports s13 tension rods $100 shipped 0 miles only installed

Megan Rucas $50 condition is used ( purchased from zilvia member )

S14 front hubs with 4 piston calipers and lca's with energy suspension bushings installed, brought them from japan. Calipers are in good condition. Spray painted purple with letters polished and high temp clear to prevent rust. $300 shipped.

Skyline gts rear 5 lug hubs with circuit sport extended studs ( not installed yet but can be ) $100 for everything ( used of course )

1 300zx rear caliper ( can't recall what side but will double check when I get off of work ) rebuilt and ready to go also painted purple with polished lettering $60 shipped.

Chase bays ps line for rhd will work for lhd but will be longer of course. Comes with all fittings. 0 miles only installed. $70 shipped

S15 spec r turbo comes with brand new oem gaskets washers etc. minimal shaft play. Hot side has been ported and the comp cover is wrinkle red. Comes with clocking adapters as well. $500 shipped

S13 uprights with energy suspension bushings installed ( can come separate or I'll sell the bushings alone up to buyer ) $50 shipped

S13 silvia dual projector headlights. Glass lens has scrapes over each projector ( came that way from japan ) comes with mismatched oem corners. $225 shipped for everything.
Now the larger items.

Rhd hicas steering rack. I know what it's worth but I also know I can't expect to get that for it based on location. So this will be offered to Florida residents preferred for this whatever it cost to ship from here plus $150

R33 gtr wheels ( real deal not the fake ish ) whatever shipped plus $200

I also have a bunch of random items like rhd interior some mint. And a s14 and gc8 sti passenger seat ( sti seat bolts into s chassis )

I'll update list as I go through my parts bin. Also I'll sell everything I have for $2500 shipped ( wheels included ) that includes 1/4 glasses etc


More items added

Circuit sports down pipe including cat delete brand new.

Isis 4" blastpipes exhaust system also brand new




Sent from my iPhone using Tapatalk

BCHLR240SX
03-03-2014, 09:37 AM
Can you send me a pic of the PS line?

Sent from my Galaxy Nexus

ProjectPanda13
03-03-2014, 10:06 AM
Is there a way you can show the rack is a HICAS? I am highly interested. What other interior pieces do you have?

Thanks,
-Dave

Bullitt_180sx
03-03-2014, 10:16 AM
Is there a way you can show the rack is a HICAS? I am highly interested. What other interior pieces do you have?

Thanks,
-Dave

They look the same on the outside.

Bullitt_180sx
03-03-2014, 10:20 AM
If you could cut out the handbrake mount from the transmission hump, I will buy that. I just finished my RHD conversion and need to mount my handbrake. I am in largo florida 33773.

ProjectPanda13
03-03-2014, 10:23 AM
Maybe a video rotating the spline 2.5 (2.6 but the .1 is hard to tell) full lock rotation or something? That's what I did, to verify a HICAS on my previous s13. But I am looking for one to put in my 180, so this is perfect. I am just being cautious, nothing against you.

Regards,
-Dave

porschekilla
03-03-2014, 12:29 PM
do u have the headliner still?

s14kkouki
03-03-2014, 12:39 PM
pics of the r33 wheels?

dluevanos01
03-03-2014, 12:57 PM
how much for the 1/4 glass shipped to 90660. It's not listed so I want to get an idea fo price.

thanks

TwoForDeh
03-03-2014, 02:20 PM
wanna ship the RHD carpet? you could fold it up and send it in a small box buaha

drumnbasslvr
03-03-2014, 03:54 PM
price me on the center console with lid.

rellik27
03-03-2014, 08:49 PM
Pm sent.........bump

Chopsuey
03-04-2014, 09:01 AM
Sorry for the late reply guys, I work 12 hour shifts so I'm not home till late to take pics but I'm off tomorrow and Thursday so will start posting pics of everything.

Items added
Oem jdm powered mirrors, have switch and wiring just needs to be separated.

The carpet is available and is pretty clean for it's age.

I can cut away body parts if needed as well


Sent from my iPhone using Tapatalk

Chopsuey
03-04-2014, 10:35 AM
Headliner is intact but since there's no real difference between rhd and lhd it's not worth the hassle. Plus the roof was rusted badly so there's a chance of it having damage on the inside.

The 1/4 glass I'm not sure on yet because I havent removed them yet n may have to figure out how to freight these out.

Blitz sus air filter for sr20det maf can be modified for z32 $120 shipped obo

Blitz old school turbo timer will come with harness. Mint condition $100 shipped obo

Have interior harness for rhd not sure on price but will take offers

Also I have a mint 1980's hks bov not sure on selling yet but if the offer is right i might sell

Greddy type rs rebuilt with the ngr diaphragm and has a blitz vacuum hose outlet ( can rotate 360 degrees ) $100 shipped

I have the long block but it's in need of a rebuild

Also have all gaskets for the valve cover and spark plugs.

Intake manifold spacer. Make an offer

The small items will be shipped from here via one of the major couriers so I'll need full addresses. Just need buyers to wait until I get everything finalized. Haven't done a part out before n it pains me to do this but that's just life



Sent from my iPhone using Tapatalk

T_hardonnnn
03-05-2014, 08:57 AM
Can you pm me about the tie rods and the rucas


Sent from my iPhone using Tapatalk

Chopsuey
03-05-2014, 09:19 AM
Some pics I took. I'll start removing parts tomorrow. The gtr wheels need a respray.
67718677196772067721677226772367724677256772667727


Sent from my iPhone using Tapatalk

Chopsuey
03-05-2014, 09:21 AM
The rack already has a dif aluminum bushing pressed on already


Sent from my iPhone using Tapatalk

T_hardonnnn
03-05-2014, 09:22 AM
What's your price on the quarter glass


Sent from my iPhone using Tapatalk

Bullitt_180sx
03-05-2014, 09:41 AM
JDM and USDM headliners are significantly different in the way they fit. A JDM headliner is a must when you have a full manual seatbelt conversion.

ShakotanGazelle
03-05-2014, 10:14 AM
How much to ship the wheels to 76132?

Chopsuey
03-05-2014, 12:35 PM
I'm waiting on a quote for the wheels. I'll go by the courier tomorrow to get rates on everything soon as I can. It's a holiday here today.

Several members have asked for the 1/4 glass. Unfortunately I can't give a price yet due to not having them removed n seeing about shipping them out. At the moment everything on the car is for sale. Shipping is just the hurdle at the moment due to being outside the us.

The Rucas are Megan's and I'm willing to do $100 shipped. No bolts for them. Didn't receive them from the zilvia member that sold them to me. If someone's willing to buy them along with the baller bolts kit ( hasn't arrived to me just yet ) I'll work out a package deal. Along with the energy suspension rear bushing kit for the uprights and megan lowers ( used )

I'm not currently selling the engine or the engine harness and ecu. But the interior and what's left of the engine bay harness is for sale. It's missing all the fuses.



Sent from my iPhone using Tapatalk

Bullitt_180sx
03-05-2014, 03:28 PM
I need that parking brake mount. If you could just sawzall that piece of the transmission hump out and toss it in a box, it's a small piece.

t2films
03-05-2014, 04:54 PM
very interested in the r33 wheels and s15 turbo please clear inbox or pm me thanks chopsuey. Paypal ready and shipping zip is 60525.

240trooper
03-05-2014, 05:59 PM
You have a pm.

Chopsuey
03-23-2014, 06:29 PM
Been busy for the past few weeks. To the people interested in the 180sx glass they're no longer for sale after one broke while removing ( sucks ). I'm also keeping a lot of the parts minus the chasebays line. That's for sale for $75 shipped. The dual projectors with corners are for sale for $350 shipped. Interested parties in the rhd ebrake mount it's $50 shipped. Isis divided o2 elbow is $75 shipped. Does not include divider. Sorry for the log wait but I've decided to keep almost all my parts for a future car.


Sent from my iPhone using Tapatalk