1990 240sx USDM -s13 Sr20DET Swap

[ChadMcGarity]

I know I am probably kicking a dead horse but Im stuck.

CAR: 1990 240sx USDM

Current Harness - Using top SR20det harness and trying to link in the ka24de SOHC harness.

PROBLEM: It seems like I have so many plugs left over. I am having a hard time finding a legible diagram or ever a photo of a harness with labeled photo.

If anyone could help I would really appreciate it.

If you could PM me or text it would be greatly appreciated.

506.9nine9.1287

[bmxer882x]

Look at frsports diagram. Most say it's inaccurate but it worked for me. Only thing I didn't like is I had a 5 wire junction for ignition power. That body plug I had engine power, coil power, ignitor power, 02 heater power, and the wire that carried the current. It's all listed on the page. Other than that you just extend the 02 about 2 feet and change the dash plug (if you want that to work but not necessary.

You will have a few extra plugs as most swaps don't come with the boost solenoid which isn't needed.if I recall there was 3 or 4 unused plugs. 2 from tranny and 1 or 2 from engine